Nouri Sabrina^1,*, Abderrahmane Ghezal¹, Said Abboudi², Pierre Spiteri³

FDMP-Fluid Dynamics & Materials Processing, Vol.14, No.2, pp. 121-135, 2018, DOI: 10.3970/fdmp.2018.02045

Abstract This paper deals with the numerical study of heat and mass transfer occurring in a cavity filled with a low Prandtl number liquid. The model includes the momentum, energy and mass balance equations. These equations are discretized by a finite volume technique and solved in the framework of a custom SIMPLER method developed in FORTRAN. The effect of the problem characteristic parameters, namely the Lewis and Prandtl numbers, on the instability of the flow and related solute distribution is studied for positive and negative thermal and solutal buoyancy forces ratio. Nusselt and Sherwood numbers are derived for values of the… More >

M. Zitoune^{1, 2} , O. Ourrad Meziani², B. Meziani², M. Adnani^{1, 2}

FDMP-Fluid Dynamics & Materials Processing, Vol.12, No.1, pp. 33-55, 2016, DOI:10.3970/fdmp.2016.012.033

Abstract A finite volume code used for detailed analysis of forced-convection flow in a horizontal channel containing eight heat sources simulating electronic components. The study deals the effect of variations of Reynolds number, the volume fraction and the good choice of type of nanoparticles added to the base fluid. The study shows that the rate of heat transfer increases with increasing Reynolds number and the volume fraction of nanofluids but not infinitely. The analysis of the dynamic and thermal field shows that the heat transfer is improved, with the increase in the Reynolds number and the volume fraction. The study also… More >

ADNANI Massinissa¹, MEZIANI Bachir², OURRAD Ouerdia², ZITOUNE Mounir¹

FDMP-Fluid Dynamics & Materials Processing, Vol.12, No.1, pp. 1-14, 2016, DOI:10.3970/fdmp.2016.012.001

Abstract A numerical study of natural convection in a square cavity subjected to the thermals boundary conditions on the sidewalls is presented and discussed. The fluid is Newtonian and equations governing the flow field and the heat transfer are given in dimensionless form. The finite volume method was adopted to solve the algebraic system. Influence of the Prandtl and the Rayleigh numbers on heat transfer and the flow field is illustrated and discussed as the stream functions, isotherms, horizontal velocity, local and average Nusselt numbers. Results indicate that improved heat transfer is more pronounced with increasing Rayleigh number. In particular, at… More >

Ahmed Mezrhab¹, Hassan Naji²

FDMP-Fluid Dynamics & Materials Processing, Vol.5, No.3, pp. 283-296, 2009, DOI:10.3970/fdmp.2009.005.283

Abstract The objective of this paper is to assess the effectiveness of the coupled Lattice Boltzmann Equation (LBE) and finite volume method strategy for the simulation of the interaction between thermal radiation and laminar natural convection in a differentially heated square cavity. The vertical walls of the cavity are adiabatic, while its top and bottom walls are cold and hot, respectively. The air velocity is determined by the lattice Boltzmann equation and the energy equation is discretized by using a finite volume method. The resulting systems of discretized equations have been solved by an iterative procedure based on a preconditioned conjugate… More >

Y. Yan¹, K. Jules², M. Z. Saghir¹

FDMP-Fluid Dynamics & Materials Processing, Vol.3, No.3, pp. 231-246, 2007, DOI:10.3970/fdmp.2007.003.231

Abstract Fluid science research including thermal diffusion in fluids benefits from the quiescent low-gravity environment provided by the International Space Station (ISS). However, residual gravities (or g-jitters) aboard the ISS impact the overall environment in which experiments are being performed. The impact of these residual gravities needs to be assessed to ensure that they are appropriately accounted for when results are being reported for experiments performed onboard the ISS. In this paper we study the thermal diffusion process in a ternary mixture of n-butane, dodecane and methane. Measured data from the Space Acceleration Measurement System (SAMS) acceleration system onboard the ISS… More >

Gregor Kosec¹, Miha Založnik², Božidar Šarler¹, Hervé Combeau²

CMC-Computers, Materials & Continua, Vol.22, No.2, pp. 169-196, 2011, DOI:10.3970/cmc.2011.022.169

Abstract The simulation of macrosegregation as a consequence of solidification of a binary Al-4.5%Cu alloy in a 2-dimensional rectangular enclosure is tackled in the present paper. Coupled volume-averaged governing equations for mass, energy, momentum and species transfer are considered. The phase properties are resolved from the Lever solidification rule, the mushy zone is modeled by the Darcy law and the liquid phase is assumed to behave like an incompressible Newtonian fluid. Double diffusive effects in the melt are modeled by the thermal and solutal Boussinesq hypothesis. The physical model is solved by the novel Local Radial Basis Function Collocation Method (LRBFCM).… More >