Piao Yongfeng^*†‡§1, Jiang Chuner^*¶#1, Wang Lei^*†‡§, Yan Fengqin^*†‡§, Ye Zhimin^*†‡§, Fu Zhenfu^*†‡§, Jiang Haitao^*,**††, Jiang Yangming^‡‡, Wang Fangzheng^*†‡§

Oncology Research, Vol.28, No.6, pp. 605-613, 2020, DOI:10.3727/096504020X16022401878096

Abstract The aim of this study was to explore the predictive role of pretreatment MRI-based radiomics on early response of neoadjuvant chemotherapy (NAC) in locoregionally advanced nasopharyngeal carcinoma (NPC) patients. Between January 2016 and December 2016, a total of 108 newly diagnosed NPC patients who were hospitalized in the Cancer Hospital of the University of Chinese Academy of Sciences were reviewed. All patients had complete data of enhanced MR of nasopharynx before treatment, and then received two to three cycles of TP-based NAC. After 2 cycles of NAC, enhanced MR of nasopharynx was conducted again. Compared with the enhanced MR images… More >

Irfan Ahmed Usmani^1,*, Muhammad Tahir Qadri¹, Razia Zia¹, Asif Aziz², Farheen Saeed³

CMC-Computers, Materials & Continua, Vol.73, No.2, pp. 4369-4392, 2022, DOI:10.32604/cmc.2022.030698

Abstract Knowledge-based transfer learning techniques have shown good performance for brain tumor classification, especially with small datasets. However, to obtain an optimized model for targeted brain tumor classification, it is challenging to select a pre-trained deep learning (DL) model, optimal values of hyperparameters, and optimization algorithm (solver). This paper first presents a brief review of recent literature related to brain tumor classification. Secondly, a robust framework for implementing the transfer learning technique is proposed. In the proposed framework, a Cartesian product matrix is generated to determine the optimal values of the two important hyperparameters: batch size and learning rate. An extensive… More >

Walid El-Shafai^1,2, Amira A. Mahmoud¹, Anas M. Ali^1,3, El-Sayed M. El-Rabaie¹, Taha E. Taha¹, Osama F. Zahran¹, Adel S. El-Fishawy¹, Naglaa F. Soliman⁴, Amel A. Alhussan^5,*, Fathi E. Abd El-Samie¹

CMC-Computers, Materials & Continua, Vol.73, No.2, pp. 3795-3814, 2022, DOI:10.32604/cmc.2022.029134

Abstract In the literature, numerous techniques have been employed to decrease noise in medical image modalities, including X-Ray (XR), Ultrasonic (Us), Computed Tomography (CT), Magnetic Resonance Imaging (MRI), and Positron Emission Tomography (PET). These techniques are organized into two main classes: the Multiple Image (MI) and the Single Image (SI) techniques. In the MI techniques, images usually obtained for the same area scanned from different points of view are used. A single image is used in the entire procedure in the SI techniques. SI denoising techniques can be carried out both in a transform or spatial domain. This paper is concerned… More >

Kriti Mahajan¹, Urvashi Garg¹, Nitin Mittal², Yunyoung Nam³, Byeong-Gwon Kang^4,*, Mohamed Abouhawwash^5,6

CMC-Computers, Materials & Continua, Vol.73, No.2, pp. 3705-3720, 2022, DOI:10.32604/cmc.2022.027936

Abstract Spectral unmixing is essential for exploitation of remotely sensed data of Hyperspectral Images (HSI). It amounts to the identification of a position of spectral signatures that are pure and therefore called end members and their matching fractional, draft rules abundances for every pixel in HSI. This paper aims to unmix hyperspectral data using the minimal volume method of elementary scrutiny. Moreover, the problem of optimization is solved by the implementation of the sequence of small problems that are constrained quadratically. The hard constraint in the final step for the abundance fraction is then replaced with a loss function of hinge… More >

Xiaowei Gu^1,#, Shuwen Chen^1,2,#,*, Huisheng Zhu¹, Mackenzie Brown^3,*

CMES-Computer Modeling in Engineering & Sciences, Vol.132, No.2, pp. 507-530, 2022, DOI:10.32604/cmes.2022.018948

Abstract Coronavirus disease 2019 brings a huge burden on the medical industry all over the world. In the background of artificial intelligence (AI) and Internet of Things (IoT) technologies, chest computed tomography (CT) and chest X-ray (CXR) scans are becoming more intelligent, and playing an increasingly vital role in the diagnosis and treatment of diseases. This paper will introduce the segmentation of methods and applications. CXR and CT diagnosis of COVID-19 based on deep learning, which can be widely used to fight against COVID-19. More >

P. Immaculate Rexi Jenifer^1,*, S. Kannan²

Computer Systems Science and Engineering, Vol.44, No.2, pp. 1081-1097, 2023, DOI:10.32604/csse.2023.026128

Abstract Medical image classification becomes a vital part of the design of computer aided diagnosis (CAD) models. The conventional CAD models are majorly dependent upon the shapes, colors, and/or textures that are problem oriented and exhibited complementary in medical images. The recently developed deep learning (DL) approaches pave an efficient method of constructing dedicated models for classification problems. But the maximum resolution of medical images and small datasets, DL models are facing the issues of increased computation cost. In this aspect, this paper presents a deep convolutional neural network with hierarchical spiking neural network (DCNN-HSNN) for medical image classification. The proposed… More >

Tariq Mohammed Alqahtani^*

Computer Systems Science and Engineering, Vol.44, No.2, pp. 1433-1449, 2023, DOI:10.32604/csse.2023.025594

Abstract In recent years, huge volumes of healthcare data are getting generated in various forms. The advancements made in medical imaging are tremendous owing to which biomedical image acquisition has become easier and quicker. Due to such massive generation of big data, the utilization of new methods based on Big Data Analytics (BDA), Machine Learning (ML), and Artificial Intelligence (AI) have become essential. In this aspect, the current research work develops a new Big Data Analytics with Cat Swarm Optimization based deep Learning (BDA-CSODL) technique for medical image classification on Apache Spark environment. The aim of the proposed BDA-CSODL technique is… More >

R. Priyadharsini^*, A. Kunthavai

Intelligent Automation & Soft Computing, Vol.35, No.1, pp. 261-279, 2023, DOI:10.32604/iasc.2023.025884

Abstract Radio waves and strong magnetic fields are used by Magnetic Resonance Imaging (MRI) scanners to detect tumours, wounds and visualize detailed images of the human body. Wi-Fi and other medical devices placed in the MRI procedure room produces RF noise in MRI Images. The RF noise is the result of electromagnetic emissions produced by Wi-Fi and other medical devices that interfere with the operation of the MRI scanner. Existing techniques for RF noise mitigation involve RF shielding techniques which induce eddy currents that affect the MRI image quality. RF shielding techniques are complex and lead to RF leakage. VLC (Visible… More >

K. Chola Raja^1,*, S. Kannimuthu²

Computer Systems Science and Engineering, Vol.44, No.1, pp. 741-755, 2023, DOI:10.32604/csse.2023.025331

Abstract Autism Spectrum Disorder (ASD) requires a precise diagnosis in order to be managed and rehabilitated. Non-invasive neuroimaging methods are disease markers that can be used to help diagnose ASD. The majority of available techniques in the literature use functional magnetic resonance imaging (fMRI) to detect ASD with a small dataset, resulting in high accuracy but low generality. Traditional supervised machine learning classification algorithms such as support vector machines function well with unstructured and semi structured data such as text, images, and videos, but their performance and robustness are restricted by the size of the accompanying training data. Deep learning on… More >

Mahmoud Ragab^1,2,3,*, Sultanah M. Alshammari⁴, Amer H. Asseri^2,5, Waleed K. Almutiry⁶

CMC-Computers, Materials & Continua, Vol.73, No.1, pp. 801-815, 2022, DOI:10.32604/cmc.2022.029140

Abstract Brain cancer detection and classification is done utilizing distinct medical imaging modalities like computed tomography (CT), or magnetic resonance imaging (MRI). An automated brain cancer classification using computer aided diagnosis (CAD) models can be designed to assist radiologists. With the recent advancement in computer vision (CV) and deep learning (DL) models, it is possible to automatically detect the tumor from images using a computer-aided design. This study focuses on the design of automated Henry Gas Solubility Optimization with Fusion of Handcrafted and Deep Features (HGSO-FHDF) technique for brain cancer classification. The proposed HGSO-FHDF technique aims for detecting and classifying different… More >