F. Simonetti¹, R. M. Ardito Marretta²

CMES-Computer Modeling in Engineering & Sciences, Vol.1, No.3, pp. 81-90, 2000, DOI:10.3970/cmes.2000.001.383

Abstract Advanced propellers are being developed to improve the performance and fuel economy of future transport aircraft. To study them, various aerodynamic prediction models and systems (from theory to experiment) have been developed via several approaches (Free Wake Analysis, helicoidal source methods, scale model tests). This study focuses on the development of an efficient numerical method to predict the behaviour of rotor or propeller in forward flight. Based on a variational approach, the present numerical technique allows a significant reduction of computer resources used in the calculation of instantaneous velocities to determine the wake geometry and the three-dimensional vortex flow streaming… More >

Mohd Imran Ansari^1,*, Syed Fahad Anwer¹

FDMP-Fluid Dynamics & Materials Processing, Vol.14, No.4, pp. 259-279, 2018, DOI:10.32604/fdmp.2018.03891

Abstract We have conducted a numerical study to investigate the relationship between the aerodynamic performance of an insect wing section and the effect of corrugation in gliding flight. In particular, an Airfoil-CR, corresponding to Kesel’s Profile 2 (Kesel, Journal of Experimental Biology, vol. 203, 2000), has been used. This profile represents exactly the cross section of the so-called “Aeshna cyanea”. A smoothed variant of this profile (referred to in the present study as Airfoil-SM) has also been considered. Introducing five different variants of the Airfoil-CR corresponding to different levels of corrugation, namely M1, M2, M3, M4 and M5, an unsteady fluid… More >

Lassig, J.¹, Montes, G., Quiroga, J.

FDMP-Fluid Dynamics & Materials Processing, Vol.5, No.1, pp. 61-80, 2009, DOI:10.3970/fdmp.2009.005.061

Abstract This paper presents a description of the design and ensuing development of an automated liquid droplet generator and related utilization aboard the space shuttle, a) as a fluid positioning system for materials processing (attached droplet method), and b) as a means to measure surface oscillation of droplets under microgravity for determining their surface tension. More >

Yong Fang¹, Yunyun Zhang², Cheng Huang^1,*

CMC-Computers, Materials & Continua, Vol.61, No.1, pp. 185-195, 2019, DOI:10.32604/cmc.2019.06144

Abstract In recent years, the rapid development of e-commerce exposes great vulnerabilities in online transactions for fraudsters to exploit. Credit card transactions take a salient role in nowadays’ online transactions for its obvious advantages including discounts and earning credit card points. So credit card fraudulence has become a target of concern. In order to deal with the situation, credit card fraud detection based on machine learning is been studied recently. Yet, it is difficult to detect fraudulent transactions due to data imbalance (normal and fraudulent transactions), for which Smote algorithm is proposed in order to resolve data imbalance. The assessment of… More >

Liang Kou¹, Yiqi Shi², Liguo Zhang¹, Duo Liu^1,*, Qing Yang³

CMC-Computers, Materials & Continua, Vol.58, No.2, pp. 545-565, 2019, DOI:10.32604/cmc.2019.03760

Abstract With the development of computer hardware technology and network technology, the Internet of Things as the extension and expansion of traditional computing network has played an increasingly important role in all professions and trades and has had a tremendous impact on people lifestyle. The information perception of the Internet of Things plays a key role as a link between the computer world and the real world. However, there are potential security threats in the Perceptual Layer Network applied for information perception because Perceptual Layer Network consists of a large number of sensor nodes with weak computing power, limited power supply,… More >

Pengcheng Liu^{1, †}, Xiaojun Wang^{1, †}, S. R. Chaudhry¹, Khalid Javeed², Yue Ma^{3, *}, Martin Collier¹

CMC-Computers, Materials & Continua, Vol.57, No.3, pp. 353-363, 2018, DOI:10.32604/cmc.2018.04142

Abstract The combination of traditional processors and Field Programmable Gate Arrays (FPGA) is shaping the future networking platform for intensive computation in resource-constrained networks and devices. These networks present two key challenges of security and resource limitations. Lightweight ciphers are suitable to provide data security in such constrained environments. Implementing the lightweight PRESENT encryption algorithm in a reconfigurable platform (FPGAs) can offer secure communication service and flexibility. This paper presents hardware acceleration of security primitives in SDN using NETFPGA-10G. We implement an efficient design of the PRESENT algorithm for faster, smaller and lower power consumption hardware circuit using Verilog. We evaluate… More >

Ananthalakshmi K. Iyer¹, A. Rama Chra Murthy², Smitha Gopinath², Nagesh R. Iyer³

CMC-Computers, Materials & Continua, Vol.42, No.3, pp. 227-244, 2014, DOI:10.3970/cmc.2014.042.227

Abstract A non-linear fracture mechanics based approach is proposed to depict a typical fracture mechanism from initiation to growth, eventually leading to failure. This concept is developed for a lightly reinforced beam in flexure. The proposed model integrates the existing methodology of a Stress Intensity Factor equilibrium equation with the bridging forces developed in concrete cover and rebar. The model and solution algorithm outlined presents an elaborate understanding of the mechanism involved and is significant in predicting the behaviour of flexural members. The analysis is performed using MATLAB programming. The proposed approach ensures a maximum tolerable crack length and crack width… More >

X.P. Shen¹, J.L. Feng²

CMC-Computers, Materials & Continua, Vol.20, No.2, pp. 185-204, 2010, DOI:10.3970/cmc.2010.020.185

Abstract The characteristic length of a gradient-dependent damage model is a key parameter, which is usually regarded as the length of damage process zone (DPZ). Value and evolution of the size of DPZ were investigated by both a numerical method and an experimental manner. In the numerical study, the geometrical model adopted was a set of four-point shearing beams; the numerical tool used was the Abaqus/Explicit software. The distance between the front and end of a complete DPZ was obtained. Values of strain components at these points were given out at given time points. The experimental study of the evolution process… More >