A.K. Plappally¹, M.A.R. Sharif¹, R.C. Bradt²

FDMP-Fluid Dynamics & Materials Processing, Vol.3, No.2, pp. 115-128, 2007, DOI:10.3970/fdmp.2007.003.115

Abstract A novel physical chemical filtration process in a tundish for removal of inclusion particles from molten steel is proposed and analyzed. The considered inclusion particles are mainly composed of the minerals alumina (Al2O3 and spinel (MgAl2O4, which have an affinity to adhere (on contact) to an inclusion trap. An industrial tundish is considered and modified with a zigzag channel block insert installed across the molten steel flow so that when the molten steel flows through the zigzag channels, the inclusion particles are driven into contact with the channel surfaces by increased recirculation and turbulence. The inclusions will bond with the… More >

J. Bahen¹, O. Gaber¹, K. Behdinan², J. De Beer³, P. Zalzal⁴, M. Papini¹, M. Z. Saghir¹

FDMP-Fluid Dynamics & Materials Processing, Vol.1, No.4, pp. 343-352, 2005, DOI:10.3970/fdmp.2005.001.343

Abstract The penetration of the reamer into the medullary cavity can be compared to a piston entering a cylinder filled with viscous fluid. When the flutes of the reamer are clogged with bone debris, fat and marrow, the piston effect is magnified and larger pressures are usually obtained. This paper considers a reamer with clogged flutes and investigates whether the rotation speed of the reamer has a significant influence on the pressure within the intramedullary cavity. The effect of reamer rotation speed on the pressure distribution within the bone is investigated numerically by solving the full three-dimensional Navier-Stokes equations together with… More >

Cosmina S. Hogea¹, Bruce T. Murray¹, James A. Sethian^2,3

FDMP-Fluid Dynamics & Materials Processing, Vol.1, No.2, pp. 109-130, 2005, DOI:10.3970/fdmp.2005.001.109

Abstract A computational framework for simulating growth and transport in biological materials based on continuum models is proposed. The advantages of the finite difference methodology employed are generality and relative simplicity of implementation. The Cartesian mesh/level set method developed here provides a computational tool for the investigation of a host of transport-based tissue/tumor growth models, that are posed as free or moving boundary problems and may exhibit complicated boundary evolution including topological changes. The methodology is tested here on a widely studied "incompressible flow" type tumor growth model with a numerical implementation in two dimensions; comparisons with results obtained from a… More >

Hsien-Chie Cheng^1,2, Chien-Hao Ma¹, Ching-Feng Yu³, Su-Tsai Lu⁴, Wen-Hwa Chen^2,3

CMC-Computers, Materials & Continua, Vol.38, No.3, pp. 129-154, 2013, DOI:10.3970/cmc.2013.038.129

Abstract User experiences for electronic devices with high portability and flexibility, good intuitive human interfaces and low cost have driven the development of semiconductor technology toward flexible electronics and display. In this study proposes, an advanced flexible interconnect technology is proposed for flexible electronics, in which an ultra-thin IC chip having a great number of micro-bumps is bonded onto a very thin flex substrate using an epoxy-based anisotropic conductive film (ACF) to form fine-pitch and reliable interconnects or joints (herein termed ACF-typed thin-flip-chip-on-flex (TFCOF) technology). The electrical and thermal -mechanical performances of the micro-joints are the key to the feasibility and… More >

D.T. Fullwood¹, S.R. Kalidindi², B.L. Adams¹, S. Ahmadi¹

CMC-Computers, Materials & Continua, Vol.9, No.1, pp. 25-40, 2009, DOI:10.3970/cmc.2009.009.025

Abstract Localization relations arise naturally in the formulation of multi-scale models. They facilitate statistical analysis of local phenomena that may contribute to failure related properties. The computational burden of dealing with such relations is high and recent work has focused on spectral methods to provide more efficient models. Issues with the inherent integrations in the framework have led to a tendency towards calibration-based approaches. In this paper a discrete Fourier transform framework is introduced, leading to an extremely efficient basis for the localization relations. Previous issues with the Green's function integrals are resolved, and the method is validated against finite element… More >

A.Z. Lorbiecka¹, R.Vertnik², H.Gjerkeš¹, G. Manojlovič², B.Senčič², J. Cesar², B.Šarler^1,3

CMC-Computers, Materials & Continua, Vol.8, No.3, pp. 195-208, 2008, DOI:10.3970/cmc.2008.008.195

Abstract A numerical model is developed for the simulation of solidification grain structure formation (equiaxed to columnar and columnar to equiaxed transitions) during the continuous casting process of steel billets. The cellular automata microstructure model is combined with the macroscopic heat transfer model. The cellular automata method is based on the Nastac's definition of neighborhood, Gaussian nucleation rule, and KGT growth model. The heat transfer model is solved by the meshless technique by using local collocation with radial basis functions. The microscopic model parameters have been adjusted with respect to the experimental data for steel 51CrMoV4. Simulations have been carried out… More >

Kilho Eom¹, Jeong-Hee Ahn², Seung-Chul Baek², Jae-In Kim², Sungsoo Na^2,3

CMC-Computers, Materials & Continua, Vol.6, No.1, pp. 35-42, 2007, DOI:10.3970/cmc.2007.006.035

Abstract This paper concerns the application and demonstration of robust reduction methodology for biomolecular structure modeling, which is able to estimate dynamics of large proteins. The understanding of large protein dynamics is germane to gain insight into biological functions related to conformation change that is well described by normal modes. In general, proteins exhibit the complicated potential field and the large degrees of freedom, resulting in the computational prohibition for large protein dynamics. In this article, large protein dynamics is investigated with modeling reduction schemes. The performance of hierarchical condensation methods implemented in the paper is compared with that obtained from… More >

L. Dieng¹, A. Abdul-Latif², M. Haboussi, C. Cunat³

CMC-Computers, Materials & Continua, Vol.6, No.1, pp. 21-34, 2007, DOI:10.3970/cmc.2007.006.021

Abstract Being of particular interest in this work, a complicated phenomenon related to cyclic softening of metallic polycrystals is modeled. As in the Waspaloy, this phenomenon can take place when a non-proportional tension-torsion cyclic loading of 90° out-of-phase is followed, after cyclic steady state, by a uniaxial one (tension-compression) with the same maximum equivalent plastic strain. By using the DNLR (Distribution of Non Linear Relaxation) model recently proposed by the authors describing the cyclic plasticity of metals, a new extension is here developed. It is recognized that such an extension can satisfactorily reproduce this softening phenomenon. It is noteworthy that this… More >

L. Gornet¹, S. Marguet², G. Marckmann³

CMC-Computers, Materials & Continua, Vol.4, No.2, pp. 63-74, 2006, DOI:10.3970/cmc.2006.004.063

Abstract The purpose of the present study is to determine the components of the effective elasticity tensor and the failure properties of Nomex^® honeycomb cores. In order to carry out this study, the NidaCore software, a program dedicated to Nomex®Cores predictions, has been developed using the Finite Element tool Cast3M-CEA. This software is based on periodic homogenization techniques and on the modelling of structural instability phenomena. The homogenization of the periodic microstructure is realized thanks to a strain energy approach. It assumes the mechanical equivalence between the microstructures of a RVE and a similar homogeneous macroscopic volume. The key point of… More >

H. T. Liu¹, Z. D. Han¹, A. M. Rajendran², S. N. Atluri³

CMC-Computers, Materials & Continua, Vol.4, No.1, pp. 43-54, 2006, DOI:10.3970/cmc.2006.004.043

Abstract The Rajendran-Grove (RG) ceramic damage model is a three-dimensional internal variable based constitutive model for ceramic materials, with the considerations of micro-crack extension and void collapse. In the present paper, the RG ceramic model is implemented into the newly developed computational framework based on the Meshless Local Petrov-Galerkin (MLPG) method, for solving high-speed impact and penetration problems. The ability of the RG model to describe the internal damage evolution and the effective material response is investigated. Several numerical examples are presented, including the rod-on-rod impact, plate-on-plate impact, and ballistic penetration. The computational results are compared with available experiments, as well… More >