Weiliang Gao¹, Shixu Jia², Tingting Zhao^2,3,*, Zhiyong Wang²

CMES-Computer Modeling in Engineering & Sciences, Vol.139, No.3, pp. 3495-3511, 2024, DOI:10.32604/cmes.2023.046188 - 11 March 2024

Abstract The mechanical properties of interfacial transition zones (ITZs) have traditionally been simplified by reducing the stiffness of cement in previous simulation methods. A novel approach based on the discrete element method (DEM) has been developed for modeling concrete. This new approach efficiently simulates the meso-structure of ITZs, accurately capturing their heterogeneous properties. Validation against established uniaxial compression experiments confirms the precision of this model. The proposed model can model the process of damage evolution containing cracks initiation, propagation and penetration. Under increasing loads, cracks within ITZs progressively accumulate, culminating in macroscopic fractures that traverse the More >

Mohamed Ammar^1,*, Alireza Mousavi¹, Hamed Al-Raweshidy^2,*

Digital Engineering and Digital Twin, Vol.2, pp. 1-31, 2024, DOI:10.32604/dedt.2023.044930 - 31 January 2024

Abstract The advent of technology around the globe based on the Internet of Things, Cloud Computing, Big Data, Cyber-Physical Systems, and digitalisation. This advancement introduced industry 4.0. It is challenging to measure how enterprises adopt the new technologies. Industry 4.0 introduced Digital Twins, given that no specific terms or definitions are given to Digital Twins still challenging to define or conceptualise the Digital Twins. Many academics and industries still use old technologies, naming it Digital Twins. This young technology is in danger of reaching the plateau despite the immense benefit to sectors. This paper proposes a… More >

RABIRANJAN MURMU^a,b, DEBASHIS ROY^a, HAREKRUSHNA SUTAR^b

Journal of Polymer Materials, Vol.40, No.3-4, pp. 125-139, 2023, DOI:10.32381/JPM.2023.40.3-4.1

Abstract A one dimensional isothermal model is proposed by modelling the kinetics of methanol transport at anode flow channel (AFC), membrane and cathode catalyst layer of direct methanol fuel cell (DMFC). Analytical model is proposed to predict methanol cross-over rate through the electrolyte membrane and cell performance. The model presented in this paper considered methanol diffusion and electrochemical oxidation at the anode and cathode channels. The analytical solution of the proposed model was simulated in a MATLAB environment to obtain the polarization curve and leakage current. The effect of methanol concentration on cell voltage and leakage More >

Elias Hossain¹, Abdullah Alshahrani², Wahidur Rahman^3,*

Intelligent Automation & Soft Computing, Vol.38, No.2, pp. 109-123, 2023, DOI:10.32604/iasc.2022.029511 - 05 February 2024

Abstract This paper aims to develop Machine Learning algorithms to classify electronic articles related to this phenomenon by retrieving information and topic modelling. The Methodology of this study is categorized into three phases: the Text Classification Approach (TCA), the Proposed Algorithms Interpretation (PAI), and finally, Information Retrieval Approach (IRA). The TCA reflects the text preprocessing pipeline called a clean corpus. The Global Vectors for Word Representation (Glove) pre-trained model, FastText, Term Frequency-Inverse Document Frequency (TF-IDF), and Bag-of-Words (BOW) for extracting the features have been interpreted in this research. The PAI manifests the Bidirectional Long Short-Term Memory (Bi-LSTM)… More >

Hsu-Hua Lee, Minh T. N. Nguyen^*

Journal of New Media, Vol.5, No.1, pp. 65-80, 2023, DOI:10.32604/jnm.2023.045792 - 27 December 2023

Abstract YouTube videos on sustainable fashion enable the public to gain basic knowledge about this concept. In this paper, we analyse user comments on YouTube videos that contain sustainable fashion content. The paper’s main objective is to help content creators and business managers effectively understand the perspectives of viewers, thus improving video quality and developing business. We analysed a dataset of 17,357 comments collected from 15 sustainable fashion YouTube videos. First, we use Latent Dirichlet Allocation (LDA), a topic modelling technique, to discover the abstract topics. In addition, we use two approaches to rank these topics: More >

Mohammed S. M. Gismalla^1,2, Asrul I. Azmi^1,2, Mohd R. Salim^1,2, Farabi Iqbal^1,2, Mohammad F. L. Abdullah³, Mosab Hamdan^4,5, Muzaffar Hamzah^4,*, Abu Sahmah M. Supa’at^1,2

CMC-Computers, Materials & Continua, Vol.77, No.2, pp. 2189-2204, 2023, DOI:10.32604/cmc.2023.035250 - 29 November 2023

Abstract Visible light communication (VLC) has a paramount role in industrial implementations, especially for better energy efficiency, high speed-data rates, and low susceptibility to interference. However, since studies on VLC for industrial implementations are in scarcity, areas concerning illumination optimisation and communication performances demand further investigation. As such, this paper presents a new modelling of light fixture distribution for a warehouse model to provide acceptable illumination and communication performances. The proposed model was evaluated based on various semi-angles at half power (SAAHP) and different height levels for several parameters, including received power, signal to noise ratio More >

Vitaliy Suvorov^1,2,*, Olga Loboda², Maria Balakina¹, Igor Kulczycki²

Congenital Heart Disease, Vol.18, No.5, pp. 491-505, 2023, DOI:10.32604/chd.2023.030583 - 10 November 2023

Abstract Background: Three-dimensional printing technology may become a key factor in transforming clinical practice and in significant improvement of treatment outcomes. The introduction of this technique into pediatric cardiac surgery will allow us to study features of the anatomy and spatial relations of a defect and to simulate the optimal surgical repair on a printed model in every individual case. Methods: We performed the prospective cohort study which included 29 children with congenital heart defects. The hearts and the great vessels were modeled and printed out. Measurements of the same cardiac areas were taken in the… More > Graphic Abstract

Chongyang Zhao, Wei Chai, Beibei Rui, Lin Chen^*

Energy Engineering, Vol.120, No.11, pp. 2683-2705, 2023, DOI:10.32604/ee.2023.029620 - 31 October 2023

Abstract At present, the direct drive permanent magnet synchronous generator (DD-PMSG) grid connected system based on virtual synchronous generator (VSG) control will experience power oscillation at sub synchronous frequencies. The mechanism and characteristics of this new type of sub-synchronous interaction (SSI) are not yet clear, and the system cannot recover to steady state solely based on the characteristics of VSG itself. Especially when connected to a weak current network, oscillations are more pronounced, affecting the stability of the system. In severe cases, the system may trigger shutdown protection and be disconnected from the network. Existing research More >

Haitao Hu¹, Hongmei Ma², Shuli Mei^1,*

CMC-Computers, Materials & Continua, Vol.76, No.3, pp. 3813-3832, 2023, DOI:10.32604/cmc.2023.041416 - 08 October 2023

Abstract Biological slices are an effective tool for studying the physiological structure and evolution mechanism of biological systems. However, due to the complexity of preparation technology and the presence of many uncontrollable factors during the preparation processing, leads to problems such as difficulty in preparing slice images and breakage of slice images. Therefore, we proposed a biological slice image small-scale corruption inpainting algorithm with interpretability based on multi-layer deep sparse representation, achieving the high-fidelity reconstruction of slice images. We further discussed the relationship between deep convolutional neural networks and sparse representation, ensuring the high-fidelity characteristic of… More >

Lifan Chen^1,*, Ning Guo¹, Zhongxuan Yang¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.2, pp. 1-1, 2023, DOI:10.32604/icces.2023.09709

Abstract A multiscale approach [1] that couples the finite-element method (FEM) and the discrete-element method (DEM) is employed to model and analyse the earthquake fault rupture-soil-foundation interaction (FR-SFI) problem. In the approach, the soil constitutive responses are obtained from DEM solutions of representative volume elements (RVEs) embedded at the FEM integration points so as to effectively bypass the phenomenological hypotheses in conventional FEM simulations. The fault rupture surfaces and shear localization patterns under normal faults with or without foundation atop have been well captured by the multiscale approach and verified with available centrifuge experimental [2] and More >