Adeline Tchikango Siagam¹, Gunther Brenner¹, Peter Giese², Volker Wesling²

FDMP-Fluid Dynamics & Materials Processing, Vol.4, No.2, pp. 77-84, 2008, DOI:10.3970/fdmp.2008.004.077

Abstract The PTA (''Plasma-Transferred-Arc'') is a widespread variant of plasma powder processes to manufacture coatings against corrosion or abrasion. For the optimization of this technique, an explanation of the processes which lead to a maximal deposition performance (i.e. maximal quantity of powder converted per time) is required. Especially the gas and particle flow in the region between the burner nozzle and the work piece is of interest. In the present study, flow simulations (Computational Fluid Dynamics, CFD) have been done in order to investigate the determining factors for the dimensioning of the processes. Additionally, velocity measurements have been obtained with PIV… More >

Mark Sussman¹, Mitsuhiro Ohta²

FDMP-Fluid Dynamics & Materials Processing, Vol.3, No.1, pp. 21-36, 2007, DOI:10.3970/fdmp.2007.003.021

Abstract In this paper, we describe new techniques for numerically approximating two-phase flows. Specifically, we present new techniques for treating the viscosity and surface tension terms that appear in the Navier-Stokes equations for incompressible two-phase flow. Our resulting numerical method has the property that results computed using our two-phase algorithm approach the corresponding "one-phase'' algorithm in the limit of zero gas density/viscosity; i.e. the two-phase results approach the one-phase free-boundary results in the limit that the gas is assumed to become a uniform pressure void. By grid convergence checks and comparison with previous experimental data, we shall demonstrate the advantages of… More >

O.M. Lavrenteva¹, D. Tsemakh, A. Nir

FDMP-Fluid Dynamics & Materials Processing, Vol.1, No.2, pp. 131-152, 2005, DOI:10.3970/fdmp.2005.001.131

Abstract We have studied the motion of a drop, induced by the internal secretion of a surface-active substance, in the vicinity of solid walls or non-deformable liquid-liquid interface under micro-gravity conditions. The secreted substance renders a non-uniform distribution of surfactant along the outer surface that, in turn, results in interfacial stress variation that ultimately leads to a surface motion and to locomotion of the drop. Cases of plane and spherical boundaries have been considered as well as cases of linear and non-linear dependence of the interfacial tension on concentration of surfactant. The dependence of the drop migration velocity on the location… More >

Edwin Jim ´enez¹, Mark Sussman², Mitsuhiro Ohta³

FDMP-Fluid Dynamics & Materials Processing, Vol.1, No.2, pp. 97-108, 2005, DOI:10.3970/fdmp.2005.001.097

Abstract The aim of this paper is to utilize a numerical model to compute bubble motion in quiescent Newtonian and viscoelastic liquids. For our numerical method, we use a coupled level set and volume-of-fluid method with a second order treatment for the jump conditions related to surface tension. We investigate axisymmetric gas-liquid systems with large density and viscosity ratios as well as buoyancy-driven flows with complex changes in topology. We present comparisons to previous computational results as well as experimental results. More >

Yanbin Wang^1,2, Deli Gao¹, Jun Fang¹

CMC-Computers, Materials & Continua, Vol.48, No.1, pp. 57-75, 2015, DOI:10.3970/cmc.2015.048.057

Abstract In this paper, the mechanical model to analyze the riser lateral vibration displacement and stress distribution in installation has been established via variational approach and the principle of minimum potential energy. In this model, the influence of vessel motion on riser lateral vibration has been taken into consideration. The specific expression of lateral vibration has also been figured out according to the boundary conditions and initial conditions. At last, the variations of riser maximum lateral displacement and stress distribution on water depth (WD), wave height, wave period, riser OD, BOPS weight have been discussed. More >

X.G. Yuan¹, R.J. Zhang²

CMC-Computers, Materials & Continua, Vol.3, No.3, pp. 119-130, 2006, DOI:10.3970/cmc.2006.003.119

Abstract In this paper, the problem of cavity formation and motion in an incompressible transversely isotropic nonlinearly elastic solid sphere, which is subjected to a uniform radial tensile dead load on its surface, is examined in the context of nonlinear elastodynamics. The strain energy density associated with the nonlinearly elastic material may be viewed as the generalized forms of some known material models. It is proved that some determinate conditions must be imposed on the form of the strain energy density such that the surface tensile dead load has a finite critical value. Correspondingly, as the surface tensile dead load exceeds… More >