Fei Liu¹, Dongliang Zhang^2,*, Qifu Zhu¹, Qingyong Su¹

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.9, pp. 2345-2359, 2023, DOI:10.32604/fdmp.2023.027084

Abstract A hill can be regarded as an environmental carrier of heat. Water, rocks and the internal moisture naturally present in such environment constitute a natural heat accumulator. In the present study, the heat and moisture transfer characteristics in a representative hill cave have been simulated via a method relying on the Darcy’s law. The simulations have been conducted for both steady and unsteady conditions to discern the influence of permeability and geometric parameters on the thermal and moisture transfer processes. The reliability of the simulation has been verified through comparison of the numerical results with the annual observation data. As… More > Graphic Abstract

Fangzhou Wang^a,* , Gennifer A. Riley^b, Munonyedi Egbo^c, Melanie M. Derby^b, Gisuk Hwang^c, Xianglin Li^a,†

Frontiers in Heat and Mass Transfer, Vol.15, pp. 1-8, 2020, DOI:10.5098/hmt.15.1

Abstract This study conducts pore-scale simulations and experiments to estimate the permeability of two different types of porous materials: metal foams and sintered copper particles with porosities of approximately 0.9 and 0.4, respectively. The integration of micro X-ray computed tomography with pore-scale computational fluid dynamics simulations develops a unique tool to capture the pore-scale geometry of porous media and accurately predict non-isotropic permeability of porous media. The pore-scale simulation not only results in improved prediction accuracy but also has the capability to capture non-isotropic properties of heterogeneous materials, which is a huge challenge for empirical correlations, volume averaged simulations, and simulations… More >

Mian Wang¹, Yongbin Zhang^2,*

Frontiers in Heat and Mass Transfer, Vol.18, pp. 1-5, 2022, DOI:10.5098/hmt.18.7

Abstract Blood capillaries are the ends of blood vessel tissues in human bodies, which are importantly functioned as exchanging the nutrients between bloods and interstitial fluids. Most blood capillaries such as in skins, skeletal muscles, cardiac muscles and lungs etc. have the walls with massively distributed cylindrical nanopores with diameters around from 50nm to 60nm. These pores are the only channels for transporting water, oxygen, carbon dioxide and ions, while preventing all the substances with the diameters greater than 60nm or a little more from passing through. The present paper presents the analytical results for the water permeability through these pores… More >

Liefei Pei^1,2, Xiangyun Zhang¹, Zizhou Yuan^1,*

Journal of Renewable Materials, Vol.11, No.6, pp. 2969-2983, 2023, DOI:10.32604/jrm.2023.025760

Abstract Iron-based amorphous crystalline powder Fe₇₈Si₉B₁₃^AP is used as a permeability reaction barrier (PRB) combined with an electrokinetic method (EK-PRB) to study the removal rate of Cu in contaminated soil. After treating Cucontaminated soil for 5 days under different voltage gradients and soil water content, the soil pH is between 3.1 and 7.2. The increase of voltage gradient and soil water content can effectively promote the movement of Cu²⁺ to the cathode. The voltage gradient is 3 V/cm, and the water content of 40% is considered to be an optional experimental condition. Therefore, under this condition, the effects of Fe₇₈Si₉B₁₃^AP and… More >

Liang Wang¹, Baofeng Hou¹, Yanming Fang³, Jintao Zhang², Fajian Nie^1,2,*

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.7, pp. 1925-1937, 2023, DOI:10.32604/fdmp.2023.025966

Abstract Oxygen-reducing air flooding is a low-permeability reservoir recovery technology with safety and low-cost advantages. However, in the process of air injection and drive, carbon in the air is oxidized through the crude oil reservoir to generate CO₂, and this can cause serious corrosion in the recovery well. In this study, experiments on the corrosion of J55 tubular steel in a fluid environment with coexisting O₂ and CO₂ in an autoclave are presented. In particular, a weight loss method and a 3D morphometer were used to determine the average and the local corrosion rate. The corrosion surface morphology and composition were… More >

Wei Xiong^1,2, Dagang Li^1,*, Peixing Wei², Lin Wang², Qian Feng¹

Journal of Renewable Materials, Vol.11, No.5, pp. 2265-2278, 2023, DOI:10.32604/jrm.2023.025483

Abstract Poplar wood, which was used as the absorption material for the solar-driven interfacial evaporation, was treated for 3 days, 6 days and 9 days with the pectinase, and then was simulated for photothermal evaporation test at one standard solar radiation intensity (1 kW⋅m⁻²). The effects of pectinase treatment on cell passage and water migration capacity of poplars were analyzed by the mercury intrusion porosimetry, the scanning electron microscope and fractal theory. It was found that the pit membrane and the ray parenchyma cells of poplar wood were degraded and destroyed after pectinase treatment. Compared with the untreated poplar wood, the evaporation… More >

Xin Huang^1,*, Yunpeng Jiang¹, Daowu Huang¹, Xianke He¹, Xianguo Zhang², Ping Guo³

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.6, pp. 1679-1691, 2023, DOI:10.32604/fdmp.2023.025312

Abstract

The seepage mechanism plays a crucial role in low-permeability gas reservoirs. Compared with conventional gas reservoirs, low-permeability sandstone gas reservoirs are characterized by low porosity, low permeability, strong heterogeneity, and high water saturation. Moreover, their percolation mechanisms are more complex. The present work describes a series of experiments conducted considering low-permeability sandstone cores under pressure-depletion conditions (from the Xihu Depression in the East China Sea Basin). It is shown that the threshold pressure gradient of a low-permeability gas reservoir in thick layers is positively correlated with water saturation and negatively correlated with permeability and porosity. The reservoir stress sensitivity is… More >

Wei Chen^1,*, Ao Xu¹, Hejun Zhang¹, Mingquan Sheng¹, Yue Liang¹, Frederic Skoczylas²

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.6, pp. 1623-1636, 2023, DOI:10.32604/fdmp.2023.025083

Abstract Two different freeze-thaw cycles (FTC) are considered in this study to assess the related impact on gas permeability and micro-pore structure of a mortar. These are the water-freezing/water-thawing (WF-WT) and the air-freezing/air-thawing (AF-AT) cycles. The problem is addressed experimentally through an advanced nuclear magnetic resonance (NMR) technique able to provide meaningful information on the relationships among gas permeability, pore structure, mechanical properties, and the number of cycles. It is shown that the mortar gas permeability increases with the number of FTCs, the increase factor being 20 and 12.83 after 40 cycles for the WF-WT and AF-AT, respectively. The results also… More >

Xinyu Zhou^1,2, Jia Huang^1,2, Yuchen Qian^1,2, Wenli Luo^1,2, Lisha Qi³, Jie Wang³, Zhibin Jiang³, Hao Kang^4,*

Energy Engineering, Vol.120, No.3, pp. 763-774, 2023, DOI:10.32604/ee.2023.025893

Abstract

Due to the characteristics of reservoir formation, the producing level of low permeability reservoir is relatively very low. It is hard to obtain high recovery through conventional development schemes. Considering the tight matrix, complex fracture system, low production level of producers, and low recovery factor of M block in Xinjiang oilfield, it is selected for on-site pilot test of nitrogen foam flooding. Detailed flooding scheme is made and the test results are evaluated respectively both for producers and injectors. The pressure index, filling degree, and fluid injection profile are found to be all improved in injectors after injection of nitrogen… More >

Fan Li^1,#, Xin Cai^2,#, Yanan Zhang^1,*, Xingwen Guo^2,*, Minmin Jiang³

Journal of Renewable Materials, Vol.11, No.4, pp. 1745-1762, 2023, DOI:10.32604/jrm.2022.024380

Abstract In this paper, the effects of different influencing factors and factor interaction on the compressive strength and permeability of recycled aggregate pervious concrete (RAPC) were studied based on the response surface method (RSM). By selecting the maximum aggregate size, water cement ratio and target porosity as design variables, combined with laboratory tests and numerical analysis, the influences of three factors on the compressive strength and permeability coefficient of RAPC were revealed. The regression equation of compressive strength and permeability coefficient of recycled aggregate pervious concrete were established based on RSM, and the response surface model was optimized to determine the… More >