Qahtan A. Hamad¹, Hanaa A. Al-Kaisy¹, Mohanad N. Al-Shroofy¹, Noor K. Faheed^2,*

Journal of Renewable Materials, Vol.11, No.4, pp. 1601-1612, 2023, DOI:10.32604/jrm.2023.023213

Abstract This work aims to prepare chitosan (CS)-based coated layers, CS (10 wt% nanosilver/90 wt% CS, 10 wt% biotin/90 wt% CS, and 5 wt% nanosilver–5 wt% biotin)/90 wt% CS coatings are prepared, onto pure Ti substrate. The surface morphology of the novel CS composite coating was studied using field emission scanning electron microscopy, atomic force microscopy (AFM), Fourier transforms infrared (FTIR) and wettability test. Results show that the addition of (biotin, nanosilver) 5 Vol.% improves the properties of composite materials. Using different particles’ scale size aid in improving the combinations in the alginate, producing a dual effect on film properties. Coating… More > Graphic Abstract

Lixian Wu^1,#, Yongquan Li^1,#, Qiaoguang Li², Jingxuan Li¹, Qinghua Lao¹, Yucheng Zhong¹, Hui Zhang^1,*, Xiu Hu^1,*

Journal of Renewable Materials, Vol.11, No.2, pp. 975-989, 2023, DOI:10.32604/jrm.2022.023547

Abstract This study aimed to explore the anti-bacterial and anti-fungal activities of extracts from different parts of plants in the Zingiberaceae family. The inhibitory rate, minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC) of leaf and stem, and root and rhizome extracts from Alpinia katsumadai Hayata, Alpinia oxyphylla Miq × Alpinia henryi K. Schumann, Alpinia oblongifolia Hayata, Alpinia nigra (Gaertn.) Burtt, Amomum villosum Lour, Alpinia zerumbet (Pers.) Burtt. et Smith and Alpinia oxyphylla Miq were determined using the fungus cake method and double dilution method. The seven Zingiberaceae plants exhibited characteristic antibacterial activities against pathogenic bacteria and fungi. At a… More >

Haining Na^1,*, Juncheng Huang¹, Hongguang Xu², Fei Liu³, Liangke Xie¹, Baoqing Zhu³, Jiuchen Wang², Jin Zhu^1,*

Journal of Renewable Materials, Vol.11, No.2, pp. 491-503, 2023, DOI:10.32604/jrm.2023.024181

Abstract PLA composites containing biomass fillers from the three herbaceous plants such as reed, wheat stalk, and coconut fiber with length and diameter at the scale of several millimeters were prepared without using additives. The reinforcement effect on the properties of PLA/biomass filler composites is investigated. The research results show that the PLA/biomass filler composites exhibit good stiffness, flexural strength, and impact toughness. Among the three kinds of biomass fillers, reed reinforced PLA composites show optimal mechanical properties. When filled with 40%–50% reed, the flexural moduli of the composites are over 7000 MPa. Flexural strength retains at the same level of… More > Graphic Abstract

Yanliang Qiu^1,2, Bin Xiong^1,2, Zhe Hou^1,2,*, Lin Luo³

Energy Engineering, Vol.119, No.6, pp. 2243-2254, 2022, DOI:10.32604/ee.2022.021322

Abstract The shrink fit retaining ring is currently the easiest to install and the most widely used end fixed for structure AC excitation variable speed generator-motor rotor end windings. However, the current research on the effect of high strength sealing on the ventilation and heat dissipation performance of the end is not enough. In this paper, based on the actual structural parameters and periodic symmetry simplification, the three-dimensional coupled calculation model of fluid field and temperature field is established. After solving the fluid and thermal equations, the influence of the length of rotor support block, the height of rotor support block,… More >

John C. Hoiby¹, Anil N. Netravali^2,*

Journal of Renewable Materials, Vol.3, No.3, pp. 244-258, 2015, DOI:10.7569/JRM.2015.634110

Abstract This article discusses the construction (virtual model) of a fully green cabin using two types of green composites: those that use natural plant-based fibers with soy protein-based resin which have mechanical properties comparable to wood and wood products, and those that use liquid crystalline cellulose fibers with soy proteinbased resin which have properties comparable to high strength steel. Green composites with moderate strength were used to create molded walls and advanced green composites were used to create the load-bearing framework of the cabin. Construction with molded composites and prefabricated framework can greatly simplify traditional wood construction based on many parts… More >

Xiaolan Guo^1,2, Di Zhao², Jinbin Hu³, Delu Wang^2,*, Jianbin Wang¹, Muhammad Shakeel⁴

Phyton-International Journal of Experimental Botany, Vol.92, No.1, pp. 209-223, 2023, DOI:10.32604/phyton.2022.023050

Abstract

To evaluate the effects of nitrogen (N) and irrigation coupling on the soil N distribution, plant N utilization, and fruit yield of rabbiteye blueberries (Vaccinium virgatum), a field experiment was designed using two factors (water and fertilizer application) with four levels of irrigation and three levels of fertilization, and a control. Under the different water and fertilizer combinations, N primarily accumulated in the leaves. Irrigation and N application within appropriate ranges (pure N ≤ 29 g/plant and irrigation volume ≤ 2.5 L/plant) significantly improved the blueberry fruit yield. Increases in water and N within these ranges promoted the effective accumulation… More >

Houneida Attia^1,2,*

Phyton-International Journal of Experimental Botany, Vol.92, No.1, pp. 149-164, 2023, DOI:10.32604/phyton.2022.022363

Abstract Pea is a seed legume. It is rich in cellulose fibre and protein. It is also a significant source of minerals and vitamins. In this paper, we set out to better characterize the physiological responses of Pisum sativum L. to the combined effects of NaCl, 100 mM and gibberellins (GA3). Our analysis revealed that NaCl caused a decrease in growth resulting in a reduction in root elongation, distribution and density, leaf number and leaf area, and a decrease in dry matter of roots and shoots. However, the contribution of GA3 in the salty environment induced an increase in these different… More >

LIMIN YU^1,2, ZHONGFENG ZHANG^2,*, LONGWU ZHOU²

BIOCELL, Vol.46, No.12, pp. 2559-2573, 2022, DOI:10.32604/biocell.2022.022825

Abstract

Arbuscular mycorrhizal (AM) fungi reside in the rhizosphere and form mutualistic associations with plant roots. They promote photosynthesis, improve stress resistance, and induce secondary metabolite biosynthesis in host medicinal plants. The AM fungi that are symbiotic with medicinal plants comprise a wide array of species and have abundant germplasm resources. Though research on the AM fungi in medicinal plants began relatively recently, it has nonetheless become an investigative hot spot. Several scholars have explored the diversity and the growth-promoting effects of mycorrhizal fungi in hundreds of medicinal plants. Current research on symbiotic AM fungi in medicinal plants has focused mainly… More >

Ahmed Ali Ajmi^1,2, Noor Shakir Mahmood^1,2, Khairur Rijal Jamaludin^1,*, Hayati Habibah Abdul Talib¹, Shamsul Sarip¹, Hazilah Mad Kaidi¹

CMC-Computers, Materials & Continua, Vol.73, No.3, pp. 5025-5039, 2022, DOI:10.32604/cmc.2022.031239

Abstract The literature that a lack of integration between the performance shaping factors (PSFs) and the energy management performance (EMP) is one of the critical problems that prevent performance improvement and reduces the power plant’s efficiency. To solve this problem, this article aims to achieve two main objectives: (1) Systematically investigate and identify the critical success factors (CSFs) for integration with PSFs and EMP; (2) Develop a novel modelling approach to predict the performance of power plants based on innovative integrated strategies. The research methodology is grounded on the theoretical and practical approach to improving performance. The Newcastle Ottawa Scale (NOS)… More >

Yuchen Hao^*, Dawei Su, Zhen Lei

Energy Engineering, Vol.119, No.5, pp. 2081-2104, 2022, DOI:10.32604/ee.2022.021342

Abstract Renewable energy sources (RES) such as wind turbines (WT) and solar cells have attracted the attention of power system operators and users alike, thanks to their lack of environmental pollution, independence of fossil fuels, and meager marginal costs. With the introduction of RES, challenges have faced the unit commitment (UC) problem as a traditional power system optimization problem aiming to minimize total costs by optimally determining units’ inputs and outputs, and specifying the optimal generation of each unit. The output power of RES such as WT and solar cells depends on natural factors such as wind speed and solar irradiation… More >