Yingchun Yang^1,*, Liqing Chen¹, Xingdong Sun¹, Yuguang Mao²

Journal of Renewable Materials, Vol.10, No.4, pp. 1007-1023, 2022, DOI:10.32604/jrm.2022.017372

Abstract Herein, micro iron ore tailings (micro-IOTs) were prepared by wet-grinding and applied to improve sulphoaluminate cement (SAC) performance. The physicochemical properties of micro-IOTs were investigated by particle size analysis, XRD, and XPS. The hydrates trait and the hydration mechanism of micro-IOTs-SAC composite were studied by XRD, TGA, MIP, and SEM. The results demonstrated that micro-IOTs with an average grain diameter of 517 nm could be obtained by wet-grinding. The setting time of SAC gradually decreased with increasing micro-IOTs content. By adding 2% micro-IOTs, the compressive strengths of SAC pastes were enhanced about 22% and 10% at 4 h and 28… More >

Caili Yu, Hao Liu, Jintao Shao, Faai Zhang^*

Journal of Renewable Materials, Vol.10, No.4, pp. 1049-1061, 2022, DOI:10.32604/jrm.2022.017315

Abstract Preparation of polymer microspheres from naturally occurring resource is a challenge. Here, a rosin-based polyol (RAG) was used to prepare polyurethane resin (RPU) firstly, and then act as both self-assembled precursor and emulsifier, rosin based polyurethane microspheres (RPUMs) were prepared. In the process of self-emulsification, the RPU formed vesicles by self-assembly. The outer shell of the vesicle consisted of hydrophilic segments, while the inner shell contained the hydrophobic phase. After cross-linking the RPU and removal of the solvent in the core, the porous-hollow microspheres with pH-sensitive were obtained. The microspheres were characterized by optical microscope (OM), scanning electron microscopy (SEM)… More > Graphic Abstract

Nazar Hussain¹, Muhammad Attique Khan¹, Usman Tariq², Seifedine Kadry^3,*, MuhammadAsfand E. Yar⁴, Almetwally M. Mostafa⁵, Abeer Ali Alnuaim⁶, Shafiq Ahmad⁷

CMC-Computers, Materials & Continua, Vol.70, No.2, pp. 3281-3294, 2022, DOI:10.32604/cmc.2022.019036

Abstract Agriculture is an important research area in the field of visual recognition by computers. Plant diseases affect the quality and yields of agriculture. Early-stage identification of crop disease decreases financial losses and positively impacts crop quality. The manual identification of crop diseases, which are mostly visible on leaves, is a very time-consuming and costly process. In this work, we propose a new framework for the recognition of cucumber leaf diseases. The proposed framework is based on deep learning and involves the fusion and selection of the best features. In the feature extraction phase, VGG (Visual Geometry Group) and Inception V3… More >

Liang Jin^1,*, Qinghui Meng¹, Shuang Liang²

Computer Systems Science and Engineering, Vol.40, No.3, pp. 1145-1152, 2022, DOI:10.32604/csse.2022.017744

Abstract This article has no abstract. More >

Kaihan Xie¹, Yamin Hu^1,*, Stephen Afonaa-Mensah², Chuan Yuan¹, Bin Cao¹, Shuang Wang^1,*, Qian Wang¹

Journal of Renewable Materials, Vol.10, No.2, pp. 541-560, 2022, DOI:10.32604/jrm.2022.017911

Abstract Use Enteromorpha clathrate as a carbon and nitrogen precursor could obtain the N-doped porous carbon materials by two-step pyrolysis. In this paper, the exogenous nitrogen (urea, melamine) and activating agents (KOH, ZnCl₂) were employed for the production of higher-performance carbon materials from seaweed biomass. SEM, BET, FTIR, XRD, XPS, Raman and ultimate analyses were carried out to investigate the morpho-structural and elemental peculiarities of the carbonaceous materials. Moreover, cyclic voltammetry (CV) , galvanostatic charge-discharge (GCD) and cyclic charge-discharge tests were carried out to examine the electrochemical properties of the samples. The results showed that electrochemical performance of the carbonaceous materials… More > Graphic Abstract

Wenli Gu¹, Shiyi Zeng¹, Assima Dauletbek², Bin Xu^1,3,*, Xinzhou Wang¹, Man Yuan¹, Yanni Gu¹

Journal of Renewable Materials, Vol.10, No.2, pp. 385-399, 2022, DOI:10.32604/jrm.2022.016457

Abstract Bamboo vascular bundle fiber and parenchyma (BP) are separated by high-temperature treatment with saturated steam. Bamboo vascular bundle fiber is widely used in the market, but how to develop and utilize parenchyma tissue is a difficult problem. The sulfated cellulose nanofibers (ANFs) were obtained by sulfating BP with a deep eutectic solvent (DES), which provided a theoretical basis for the value-added utilization of BP. Using DES as the reaction medium and reagent, the BP was grafted with a sulfonic acid group to form a gel substance in water, ANFs and nanocellulose gel were obtained by ultrasonic cell crusher. The highest… More > Graphic Abstract

Yuhao Jiang, Jialan Yao, Chengfei Zhu^*

Journal of Renewable Materials, Vol.10, No.1, pp. 135-148, 2022, DOI:10.32604/jrm.2021.016304

Abstract Poly(urea-formaldehyde) (PUF) microcapsules were prepared by in-situ polymerization with four different processes in this paper. The chemical composition, surface morphology, particle size distribution, and thermal stability were characterized by FTIR, SEM, particle size analyzer, and TGA, respectively. The results demonstrated that the agglomeration of the PUF microcapsules was related to the agglomeration of the emulsion particles caused by the changes of emulsion interface during the shell polymerization. Due to the slow deposition of the shell material, the PUF microcapsules with the core-shell structure prepared by the process with ammonium chloride as the last additive showed good dispersibility with an average… More > Graphic Abstract

Qionglin Luo¹, Mingliang Wang², Hui Zhang¹, Yuejun Ouyang¹, Hongwei Lin¹, You Shu^1,*, Shengpei Su^1,2,*

Journal of Renewable Materials, Vol.9, No.12, pp. 2067-2076, 2021, DOI:10.32604/jrm.2021.016255

Abstract Poly(L-lactic acid) (PLLA) is a thermoplastic material with complete degradability, high biocompatibility and excellent mechanical properties. It can replace petroleum-based polymers are currently being used in the fields of packaging, agriculture, textiles, medical and so on. However, PLLA’s extremely flammability greatly limits its wider application. An bio-based flame retardant L-APP/PLLA composites was prepared by melt blending of the L-APP and PLLA. The morphology, impact properties, thermal properties and flame retardant properties of composites were investigated by field emission scanning electron microscope (SEM), impact tester, differential scanning calorimeter (DSC), thermogravimetric analyzer (TGA), limiting oxygen indexer (LOI) and horizontalvertical burning tester. The… More > Graphic Abstract

Jianbing Zhang¹, Rongjin Liu^1,2,3,*, Siyuan Fu¹, Tianyu Gao¹, Zhongfei Zhang¹

Journal of Renewable Materials, Vol.9, No.11, pp. 2001-2013, 2021, DOI:10.32604/jrm.2021.015812

Abstract Based on aluminum sulfate, a fluorine-free and alkali-free liquid accelerator (FF-AF-A) was prepared in this study. The setting time and compressive strength of three cement types with different FF-AF-A dosages were fully investigated. The compatibility of the FF-AF-A with the superplasticizers were also investigated, and the early hydration behavior and morphology of the hydration products of reference cement paste with the FF-AF-A were explored by hydration heat, X-ray diffractometry (XRD), and scanning electron microscopy (SEM). Test results indicated that adding the FF-AF-A at 8 wt% of the cement weight resulted in 2 min 35 s initial setting time and 6… More >

Yi Yang¹, Zhaodi Wu¹, Lili Ji², Shiyao Lu², Hua Jing², Jiaxing Sun², Jian Guo¹, Wendong Song³, Yaning Wang², Lu Cai^4,*

Journal of Renewable Materials, Vol.9, No.11, pp. 1869-1881, 2021, DOI:10.32604/jrm.2021.015952

Abstract In this work, carbonized mussel shell powder (CMSP) was modified by alkyl polyglucosides (APG) and rhamnolipid (RL) to render porous biomass a lipophilic surface, which was innovatively utilized as an environmentally friendly tableware cleaning material. The modified method was two-step hydrotherm-assisted synthesis. A contact angle meter was used to determine the surface hydrophobic property of modified samples (MTAR). The pore and the surface structure of CMSP and MTAR were characterized by BET, SEM, XRD, FTIR and XPS. The effect of removing oil was tested by gravimetric method. The results showed that the surface of MTAR was more porous and fluffier… More > Graphic Abstract