Ling Wang^1,2, Chenchen Huang¹, Ping Zhang³, Fenghua Liu^1,*, Ting Zou¹, Zhixiang Li¹, Jianfei Zhang¹, Gaojie Xu¹

Journal of Renewable Materials, Vol.9, No.10, pp. 1707-1715, 2021, DOI:10.32604/jrm.2021.013884

Abstract Using palygorskite (PAL) as template, the PAL/TiO₂/PANI nano-rods were synthesized by heterogeneous precipitation and in-situ polymerization. The synthesized PAL/TiO₂/PANI nanorods were used as a novel electrorheological (ER) fluid by mixing with silicone oil, which showed excellent ER effect. The yield stress of the PAL/TiO₂/PANI based ER fluid (15 vol%) reached 8.8 kPa under 4 kV mm⁻¹ electric field. The dynamic shear stress of the PAL/TiO₂/PANI based ER fluid could maintain a stable level in the shear rate range of 0.1–100 s⁻¹ . Furthermore, the PAL/TiO₂/PANI ER fluid exhibited excellent suspension stability. More >

Qiaoguang Li¹, Xuming Yan¹, Jialong Chen¹, Xugang Shu^1,*, Puyou Jia^2,*, Xiangjun Liang³

Journal of Renewable Materials, Vol.9, No.10, pp. 1673-1684, 2021, DOI:10.32604/jrm.2021.014695

Abstract Environmental cleaning is an important aspect of bacteria control. Ethyl cellulose microcapsules containing potassium monopersulfate (PMCM) were prepared by emulsified solvent diffusion method. The chemical structure and microstructure of the obtained PMCM was characterized by methods of Fourier transform infrared spectroscopy (FT-IR), optical microscopy, scanning electron microscopy and X-ACT energy dispersive X-ray spectroscopy. The SEM micrographs of the PMCM containing 21.6% of C, 46.8% of O, 10.7% of S and 19.4% of K was relatively smooth. Thermal stability, sustained release performance, and antimicrobial activity of PMCM were investigated. The results showed that the drug loading and encapsulation efficiency of PMCM… More >

Hao Dou^1,2,*, Hongxia Liu^1,2, Feng Wang^1,2, Yanli Sun^1,2

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.3, pp. 629-638, 2021, DOI:10.32604/fdmp.2021.015612

Abstract Electrospinning is a versatile and popular method for the fabrication of ultrafine fibers and many parameters in electrospinning can be adjusted when ideal micro/nanofibers are required. In particular, the selection of a proper solvent condition is a fundamental and crucial step to produce electrospun ultrafine fibers. In this study, a commonly used biomaterial, polylactic acid (PLA), was dissolved in 7 different solvents and PLA micro/nanofibers were prepared by electrospinning. The morphology, porosity, mechanical property and static contact angle were characterized to determine the quality of the obtained product. The results show that different solvent conditions have a significant effect on… More >

XI YANG¹, KE MA^1,*, RUI CHEN¹, NAIYI ZHANG², YITING MENG³, JIA WEN¹, QINPING LIAO¹

BIOCELL, Vol.45, No.4, pp. 923-932, 2021, DOI: 10.32604/biocell.2021.013625

Abstract The current study is designed to evaluate certain immunocytochemical (ICC) biomarkers to gain a better cytodiagnosis. For this purpose, 85 patients from March 2016 to March 2019 who planned to get a hysteroscopy assay were recruited. Cytological sampling was conducted by scratching the uterus cavity using SAP-1, and the samples were processed as liquid-based smears, using SurePath technology. 36 patients diagnosed with EC or atypical endometrial hyperplasia were recruited in this study. 33 cases were diagnosed with EC, and 3 cases were diagnosed with atypical endometrial hyperplasia, allocated with EC or precancerous lesions group. 26 cases were diagnosed with benign… More >

Abdullah M. Almarashi^*

CMES-Computer Modeling in Engineering & Sciences, Vol.127, No.2, pp. 621-643, 2021, DOI:10.32604/cmes.2021.014407

Abstract In this paper, a modified form of the traditional inverse Lomax distribution is proposed and its characteristics are studied. The new distribution which called modified logarithmic transformed inverse Lomax distribution is generated by adding a new shape parameter based on logarithmic transformed method. It contains two shape and one scale parameters and has different shapes of probability density and hazard rate functions. The new shape parameter increases the flexibility of the statistical properties of the traditional inverse Lomax distribution including mean, variance, skewness and kurtosis. The moments, entropies, order statistics and other properties are discussed. Six methods of estimation are… More >

Yangling Li¹, Zhengrong Li¹, Hui Yu¹, Gang Huang¹, Xiaopeng Pei², Kun Xu^2,*, Pixin Wang², Ying Tan^3,*

Journal of Renewable Materials, Vol.9, No.8, pp. 1365-1376, 2021, DOI:10.32604/jrm.2021.014909

Abstract In this work, the –catechol and –thiol modified starch was prepared by the esterification and amino condensation reaction, then a fully starch based hydrogel was prepared via the thiol-catechol Michael addition reaction. The starch hydrogel gained shape memory behaviors by coordinate with Fe³⁺ ions at alkaline condition. ¹ H-NMR had been used to character the structure of the starch derivatives and its character peaks. The hydrogel’s modulus had also been measured before and after coordinating with Fe³⁺ ions in linear area and the result showed that both the hydrogel’s storage modulus and loss modulus kept constant in linear area from… More >

Nguyen Thi Thanh Thuy^1,*, Le Hoang Huy¹, Truong Thuy Vy¹, Nguyen Thi Thanh Tam², Bien Thi Lan Thanh¹, Nguyen Thi My Lan³

Journal of Renewable Materials, Vol.9, No.8, pp. 1393-1411, 2021, DOI:10.32604/jrm.2021.015772

Abstract In the present study, the biogenic silver nanoparticles have been synthesized using aqueous leaf extract of Plectranthus amboinicus (PA), which acted as both reducing and stabilizing agents. The PA synthesized silver nanoparticles were blended with carboxymethyl cellulose/polyvinyl alcohol (CMC/PVA) biocomposite. The prepared AgNPs as well as the biogenic AgNPs incorporated CMC/PVA films were investigated using UV-visible spectrophotometry, Fourier-transform infrared spectroscopy (FT-IR), dynamic light scattering (DLS), scanning electron microscope (SEM), and X–ray diffraction (XRD). The DLS results showed that biogenic AgNPs had the average particle size of 65.70 nm with polydispersity index of 0.44. The surface plasmon resonance of AgNPs, which… More > Graphic Abstract

Zheng Cao^1,2,3,4,*, Yang Zhang², Keming Luo², Yinqiu Wu², Hongxin Gao², Junfeng Cheng^2,*, Chunlin Liu^2,3, Guoliang Tao², Qingbao Guan¹, Lei Zhang⁵

Journal of Renewable Materials, Vol.9, No.8, pp. 1447-1462, 2021, DOI:10.32604/jrm.2021.015593

Abstract

The preparation and application of functional hydrogels based on natural polysaccharides have always been a hot research topic. In this study, using acrylamide (AM) monomer, N, N'-methylene bisacrylamide (MBA) as cross-linking agent, potassium persulfate (K₂S₂O₈) as initiator, in the presence of natural polysaccharide sodium alginate (SA), the PAM/SA hydrogel was prepared by free radical polymerization. Fourier transform infrared spectroscopy (FT-IR), swelling performance tests, scanning electron microscope (SEM), thermogravimetric analysis (TGA), UV-visible spectrophotometer, mechanical property measurements were carried out to analyze the composition, morphology, and performance of the hydrogels. The swelling behavior, dye adsorption performance, and the mechanical properties of PAM/SA… More >

Xiao Han¹, Zhaodi Wu¹, Yi Yang¹, Jian Guo¹, Yaning Wang², Lu Cai³, Wendong Song⁴, Lili Ji^2,*

Journal of Renewable Materials, Vol.9, No.8, pp. 1377-1391, 2021, DOI:10.32604/jrm.2021.015076

Abstract In this study, a porous biochar material derived from waste crab shell was prepared by one-step hydrothermal carbonization and acetic acid activation method at 180°C, which was characterized by SEM, BET, XRD and FTIR. The results show that the as-prepared crab shell biochar (CSB) exhibits a fluffy irregular layered structure with abundant pores and oxygen-containing functional groups, which can facilitate the adsorption of diesel using CSB. In addition, batch adsorption experiments had been performed, effects of initial diesel concentration, adsorption time, adsorbent dosage and pH on the diesel adsorption using CSB were analyzed, which could be observed that CSB has… More >

Ewa Szefer^*, Agnieszka Leszczyńska, Edyta Hebda, Krzysztof Pielichowski

Journal of Renewable Materials, Vol.9, No.6, pp. 1127-1142, 2021, DOI:10.32604/jrm.2021.014584

Abstract The aim of this work was to use cellulose nanocrystals that were obtained by hydrolysis in phosphoric acid solution and further modified with succinic anhydride in the microwave field for PLA reinforcement. A series of all-bionanocomposites containing unmodified and surface modified cellulose nanocrystals with CNC content in the range of 1–3 %_w.t. were obtained by melt blending and tested by XRD, SEM, DSC and DMA to investigate the effect of surface esterification of CNCs on the structure, morphology, dynamic mechanical properties of bionanocomposites, as well as phase transitions of PLA in the presence of cellulosic nanofiller. DMA investigations showed the… More > Graphic Abstract