Hsien-Chie Cheng^1,2, Chien-Hao Ma¹, Ching-Feng Yu³, Su-Tsai Lu⁴, Wen-Hwa Chen^2,3

CMC-Computers, Materials & Continua, Vol.38, No.3, pp. 129-154, 2013, DOI:10.3970/cmc.2013.038.129

Abstract User experiences for electronic devices with high portability and flexibility, good intuitive human interfaces and low cost have driven the development of semiconductor technology toward flexible electronics and display. In this study proposes, an advanced flexible interconnect technology is proposed for flexible electronics, in which an ultra-thin IC chip having a great number of micro-bumps is bonded onto a very thin flex substrate using an epoxy-based anisotropic conductive film (ACF) to form fine-pitch and reliable interconnects or joints (herein termed ACF-typed thin-flip-chip-on-flex (TFCOF) technology). The electrical and thermal -mechanical performances of the micro-joints are the key to the feasibility and… More >

Kai Wang¹, Guojian Li¹, Qiang Wang^1,2, Huimin Wang¹, Jiaojiao Du¹, Jicheng He¹

CMC-Computers, Materials & Continua, Vol.38, No.2, pp. 79-89, 2013, DOI:10.3970/cmc.2013.038.079

Abstract Study on the behaviors of the melting and coalescence of clusters in atomic scale may create new structure at nanoscale, which is a very important research field. The structural evolutions of clusters Cu₃₂₁, Co₃₂₁, and Ni₃₂₁ during their melting and coalescence processes were studied using molecular dynamics simulation with a general embedded atom method in this paper. It was found that the geometries of Cu₃₂₁ and Co₃₂₁ transformed to icosahedron from fcc near their melting points, which leads to the increase of their melting points. Concerning the coalescence, it was found that Cu atoms easily formed a coating layer on… More >

Zhenhan Yao¹, Lingfei Gao¹

CMC-Computers, Materials & Continua, Vol.9, No.1, pp. 1-24, 2009, DOI:10.3970/cmc.2009.009.001

Abstract To improve the effectiveness of the lattice model for simulating the failure processes of heterogeneous brittle materials, each lattice element is refined as a subdomain with homogenous material, and is modeled by the boundary element method in this paper. For simplicity, each subdomain is modeled with constant boundary elements. To enhance the efficiency, a row of sub-domains is formed, and then a chain structure of such row-subdomain is constructed. The row-equation systems are solved one by one, and then back substituted, to obtain the final solution. Such a chain subdomain approach of the boundary element method not only reduces the… More >

M. Daian¹, A. Taube², G. Torgovnikov³, G. Daian⁴, Y. Shramkov⁵

CMC-Computers, Materials & Continua, Vol.8, No.3, pp. 165-172, 2008, DOI:10.3970/cmc.2008.008.165

Abstract Microwave wood modification and treatment technologies become more and more essential within the wood industry due to their technical and economical advantages. Microwave processing of wood involves many complicated physical phenomena and requires a very careful control of variables (such as intensity of microwave power, loading period, maximum temperature, etc.) in order to reduce structural deformations of the processed wood. To optimise and minimise the project design engineers' work, modelling and simulation of the microwave energy-wood interaction represents an indispensable tool.
This research work has been undertaken with the aim to design and optimise microwave applicators for microwave pre-drying… More >

C. Nikhare¹, K. Narasimhan²

CMC-Computers, Materials & Continua, Vol.7, No.1, pp. 1-8, 2008, DOI:10.3970/cmc.2008.007.001

Abstract Hydroforming is a manufacturing process that uses a fluid medium to form a component by using high internal pressure. Tube and sheet hydroforming has gained increasing interest in the automotive and aerospace industries because of its many advantages such as part consolidation, good quality of the formed parts etc. The main advantage is that the uniform pressure can be transferred to every where at the same time. Forming limit is the limit of the component up to that extent it can be formed safely. While analyzing hydroforming process, it is often assumed that the limit strains are identical as that… More >

S. Smaoui¹, A. Ben Hamida¹, I. Djeran-Maigre², H. Dumontet¹

CMC-Computers, Materials & Continua, Vol.4, No.3, pp. 153-162, 2006, DOI:10.3970/cmc.2006.004.153

Abstract An iterative homogenization approach is proposed in order to predict the nonlinear hydro-mechanical behaviour of porous media. This process is coupled to classical and modified secant extended methods and linear homogenization predictive schemes. At convergence of the iterative process, same equivalent behaviour is obtained for any secant method, any simplified homogenization used for the linear comparison material and for any initial porosity of the media. An application to the study of the nonlinear behaviour of clayey sediments is presented. The model parameters quantification is based on oedometric experimental results for different clays. More >

Chen Shen^1,*, Youping Chen¹, Bing Chen¹, Jingming Xie¹

CMC-Computers, Materials & Continua, Vol.61, No.1, pp. 379-397, 2019, DOI:10.32604/cmc.2019.04883

Abstract Continuous material processing operations like printing and textiles manufacturing are conducted under highly variable conditions due to changes in the environment and/or in the materials being processed. As such, the processing parameters require robust real-time adjustment appropriate to the conditions of a nonlinear system. This paper addresses this issue by presenting a hybrid feedforward-feedback nonlinear model predictive controller for continuous material processing operations. The adaptive feedback control strategy of the controller augments the standard feedforward control to ensure improved robustness and compensation for environmental disturbances and/or parameter uncertainties. Thus, the controller can reduce the need for manual adjustments. The controller… More >

Yan Liu^1,*, Lian Liu¹, Yu Yan², Hao Feng¹, Shichang Ding³

CMC-Computers, Materials & Continua, Vol.60, No.3, pp. 1123-1139, 2019, DOI:10.32604/cmc.2019.05619

Abstract Social organizations can be represented by social network because it can mathematically quantify and represent complex interrelated organizational behavior. Exploring the change in dynamic social network is essential for the situation awareness of the corresponding social organization. Social network usually evolves gradually and slightly, which is hard to be noticed. The statistical process control techniques in industry field have been used to distinguish the statistically significant change of social network. But the original method is narrowed due to some limitation on measures. This paper presents a generic framework to address the change detection problem in dynamic social network and introduces… More >

He Shi^1,2,3,4, Wenli Shang^1,2,3,4,*, Chunyu Chen^1,2,3,4, Jianming Zhao^1,2,3,4, Long Yin^{1, 2, 3, 4}

CMC-Computers, Materials & Continua, Vol.60, No.2, pp. 645-658, 2019, DOI:10.32604/cmc.2019.05648

Abstract In order to solve the problem of locating and protecting key processes and detecting outliers efficiently in complex industrial processes. An anomaly detection system which is based on the two-layer model fusion frame is designed in this paper. The key process is located by using the random forest model firstly, then the process data feature selection, dimension reduction and noise reduction are processed. Finally, the validity of the model is verified by simulation experiments. It is shown that this method can effectively reduce the prediction accuracy variance and improve the generalization ability of the traditional anomaly detection model from the… More >

Zhong Liu^1,2, Xin’an Wang¹, Chengjun Sun¹, Ken Lu³

CMC-Computers, Materials & Continua, Vol.58, No.3, pp. 653-664, 2019, DOI:10.32604/cmc.2019.04597

Abstract With the high-speed development of transportation industry, highway traffic safety has become a considerable problem. Meanwhile, with the development of embedded system and hardware chip, in recent years, human eye detection eye tracking and positioning technology have been more and more widely used in man-machine interaction, security access control and visual detection.
In this paper, the high parallelism of FPGA was utilized to realize an elliptical approximate real-time human eye tracking system, which was achieved by the series register structure and random sample consensus (RANSAC), thus improving the speed of image processing without using external memory. Because eye images acquired by… More >