RAID BANAT^1,*, MANAL AL-RAWASHDEH¹, HEBA ALKHLAIFAT¹

Journal of Polymer Materials, Vol.38, No.1-2, pp. 137-151, 2021, DOI:10.32381/JPM.2021.38.1-2.11

Abstract Composite of oil Shale ash (OSA) filler and high density polyethylene (HDPE) matrix was formulated and studied. OSA mainly composed of Ca, Si, and Fe most of which in oxide forms. OSA-HDPE composite with 0, 5, 10, 15, 20, and 25 wt. % OSA were produced using extrusion and hot press. Mechanical, morphological, and water uptake properties of the composite are discussed herein. While the tensile stress at yield, 47 MPa, restored its value close to the neat HDPE, an increase in the mean values of the tensile stress at rapture from 19 to 33 MPa, the tensile modulus from… More >

LAVANYA, R¹, NATCHIMUTHU, N^2,*

Journal of Polymer Materials, Vol.38, No.1-2, pp. 89-100, 2021, DOI:10.32381/JPM.2021.38.1-2.8

Abstract Rubber composites of nitrile (NBR) and Ethylene-Propylene-Diene (EPDM) containing unmodified and modified microcrystalline cellulose(MCC) are evaluated for their processing behaviour. The used modified MCC (T-MCC) was treated by N,N-dimethylacetamide/lithium chloride (DMAc/ LiCl).ATR-FTIR spectra of NBR-MCC composites have indicated N-H stretching and bending vibrations and confirmed interactions between nitrile rubber and MCC. AFM studies have indicated that the average roughness of NBR-T-MCC was significantly reduced when compared to that of NBR-untreated MCC. Important processing parameters such as scorch time and cure time are found to decrease significantly for both NBR and EPDM composites withT-MCC. Mechanical properties of these composites are found… More >

RITESH D. BHATT, JIGNESH P. PATEL, P. H. PARSANIA^*

Journal of Polymer Materials, Vol.38, No.1-2, pp. 71-87, 2021, DOI:10.32381/JPM.2021.38.1-2.7

Abstract Glass/Biofibers/Epoxy methacrylate of bisphenol-C (G/BF/EBCMAS) sandwich composites was prepared by compression molding. G/BF/EBCMAS showed good mechanical and good to excellent electrical properties and excellent chemical resistance. Studied properties are compared with EBCMAS and G/EBCMAS. In comparison with G/EBCMAS, G/BF/EBCMAS showed considerable decline of tensile strength (18-63.4%), flexural strength (18.8-38.7%), flexural modulus (12.8-50.7%), Izod impact strength (17.4-43.5%), Barcol hardness (2.1-16.7%) and dielectric strength (23.8-76.8%) except flexural strength of G/BM/EBCMAS. G/WC/EBCMAS (96.7%), G/B/EBCMAS (79.2%), G/GN/EBCMAS (83.3%) and G/RH/EBCMAS (97.9%) showed decline of volume resistivity, whereas other sandwich composites showed 1150-58233% improvement. The decrease in mechanical properties and dielectric strength of G/BF/EBCMAS sandwich… More >

DIPESHKUMAR D. KACHHADIYA, Z.V.P. MURTHY^*

Journal of Polymer Materials, Vol.38, No.1-2, pp. 49-61, 2021, DOI:10.32381/JPM.2021.38.1-2.5

Abstract The conventional process for methanol-water separation like distillation consumes about 60 % of total energy. As an alternative, researchers have developed a membrane-based separation process for alcohol-water mixtures separation. However, there is a big challenge for researches to separate alcohol-water aqueous mixtures using a polymeric membrane because of swelling. In the present work, the aim is to separate methanol from water by pervaporation using polymeric membranes made up of polyvinylidenefluroide (PVDF) and polyethylene glycol (PEG200) modified PVDF membranes. The membranes were characterized by thermogravimetry analysis (TGA), field emission scanning electron microscopy (FE-SEM), and Fourier-transform infrared spectroscopy (FTIR). A study on… More >

ASIS K. MANDAL¹, DEBABRATA CHAKRABORTY², MAHUYA DAS³, SAMIR K SIDDHANTA^4,*

Journal of Polymer Materials, Vol.38, No.1-2, pp. 21-34, 2021, DOI:10.32381/JPM.2021.38.1-2.3

Abstract Elastomeric chlorosulfonated polyethylene (Hypalon) and thermoplastic polypropylene (PP) based thermoplastic Vulcanizates (TPVs) were prepared in presence of different doses of partial methyl ester of styrene-maleic anhydride copolymer (PMES-MA) as compatibilizer employing dynamic vulcanization technique. The mechanical analysis of the prepared TPVs exhibited significant improvements in stress at 25% modulus, ultimate tensile strength (UTS), and hardness values. FTIR studies revealed that a chemical interaction had taken place between hypalon and compatibilizer during the process of dynamic vulcanization which led to an enhancement of interfacial adhesion between them. The two-phase morphologies were clearly observed by scanning electron microscopic studies. The Tg values… More >

ZHIHUI HUANG¹, JIAMIAO CHEN¹, YANPING HUO¹, JINGWEI ZHAO²

Journal of Polymer Materials, Vol.38, No.3-4, pp. 257-269, 2021, DOI:10.32381/JPM.2021.38.3-4.7

Abstract The effect of the ether/keto ratios on the thermal properties, mechanical performances and crystallization behavior of the Poly(aryl ether ketone)s (PAEK) were investigated. A formula was proposed the estimate the melting temperatures of the PAEKs with high accuracy. Glass transition temperatures were affected by the ether/keto ratios and molecular weights, and were related with the brittle-tough transition of the PAEKs. Mechanical performances of tensile, impact, flexural and compressive strength decreased with the increase of ether/keto ratios, while elongation had a trend of increase. The non-isothermal crystallization curves exhibited well linearity when treated with Jeziorny’s model, and two crystallization processes were… More >

SHALINI RUKHAYA^*, NEELAM M. ROSE, SAROJ YADAV

Journal of Polymer Materials, Vol.38, No.3-4, pp. 179-190, 2021, DOI:10.32381/JPM.2021.38.3-4.1

Abstract The present study was conducted to develop aroma wool fabric using microencapsulated vetiver essential oil without deteriorating the fabric properties. SEM analysis of the treated wool fabric depicted adhesion of numerous microcapsules of spherical shape and FTIR analysis indicated presence of different functional groups on the fabric. The aroma treatment improved most of the tested physical properties of wool fabric. Aroma treated fabric displayed good antimoth efficacy in terms of weight reduction (7.57%) and moth mortality (40%). Treated wool fabric also exhibited antibacterial activity with 63.45 and 61.37 percent reduction in bacterial growth against S. aureus and E.coli, respectively. The… More >

A. MADHAN KUMAR¹, K. JAYAKUMAR^2,*, M. SHALINI³

Journal of Polymer Materials, Vol.39, No.3-4, pp. 269-281, 2022, DOI:10.32381/JPM.2022.39.3-4.7

Abstract Polylactic acid (PLA) is the most popular thermoplastic biopolymer providing a stiffness and strength alternative to fossil-based plastics. It is also the most promising biodegradable polymer on the market right now, thus gaining a substitute for conservative artificial polymers. Therefore, the current research focuses on synthesizing and mechanical characterization of particlereinforced PLA composites. The hot compression molding technique was used to fabricate PLA-based composites with 0, 2.5, 5, and 7.5 weight % of sawdust, rice husk, and bagasse particle reinforcements to enhance the performance of the PLA. The pellets of PLA matrix were taken with an average size of 3… More >

RITESH D. BHATT, JIGNESH P. PATEL, PARSOTAM H. PARSANIA^*

Journal of Polymer Materials, Vol.39, No.3-4, pp. 223-239, 2022, DOI:10.32381/JPM.2022.39.3-4.4

Abstract Compression-molded epoxy methacrylate of bisphenol-C-jute/treated jute-banana/groundnut/ cane sugar/pineapple leaf/rice husk/wheat husk sandwich composites were fabricated under 5 MPa pressure at room temperature for 3 h. Alkali treated jute-natural fiber sandwich composites displayed considerably improved mechanical properties over untreated jute-natural fiber sandwich composites due to surface modification of the jute fibers. Both types of sandwich composites showed high water uptake tendency, excellent hydrolytic stability against acids, alkali, and salt solutions, and also a longer equilibrium time at 30o C. Alkali treated sandwich composites revealed a considerably lower water uptake tendency than untreated sandwich composites. Observed water uptake trend is H₂ SO₄… More >

RITESH D. BHATT, JIGNESH P. PATEL, PARSOTAM H. PARSANIA^*

Journal of Polymer Materials, Vol.39, No.3-4, pp. 205-221, 2022, DOI:10.32381/JPM.2022.39.3-4.3

Abstract Epoxy methacrylate of bisphenol-C-jute/treated jute and their sandwich composites of white coir, brown coir, wild almond, bamboo, betel nut, and palmyra were prepared by a compression molding technique under 5MPa pressure and at room temperature for three h. The neat sample showed almost double tensile strength than its jute composite, while it is comparable for treated jute. The composites revealed substantially improved flexural strength compared to neat. The neat, jute/treated jute and their sandwich composites indicated good impact strength, pretty good Barcol hardness, and fairly good electric strength. The neat sample showed excellent volume resistivity, while jute/treated jute and their… More >