Manyu Jin¹, Tao Wang¹, Zexuan Ji^1,*, Xiaobo Shen²

CMC-Computers, Materials & Continua, Vol.56, No.3, pp. 501-515, 2018, DOI: 10.3970/cmc.2018.02371

Abstract Perceptual image quality assessment (IQA) is one of the most indispensable yet challenging problems in image processing and computer vision. It is quite necessary to develop automatic and efficient approaches that can accurately predict perceptual image quality consistently with human subjective evaluation. To further improve the prediction accuracy for the distortion of color images, in this paper, we propose a novel effective and efficient IQA model, called perceptual gradient similarity deviation (PGSD). Based on the gradient magnitude similarity, we proposed a gradient direction selection method to automatically determine the pixel-wise perceptual gradient. The luminance and chrominance channels are both took… More >

Duraisamy Velmurugan¹, Masilamany Santha Alphin^1,*

CMES-Computer Modeling in Engineering & Sciences, Vol.117, No.2, pp. 125-141, 2018, DOI:10.31614/cmes.2018.01817

Abstract This study aims to investigate the effects of variable thread pitch on stress distribution in bones of different bone qualities under two different loading conditions (Vertical, and Horizontal) for a Zirconia dental implant. For this purpose, a three dimensional finite element model of the mandibular premolar section and three single threaded implants of 0.8 mm, 1.6 mm, 2.4 mm pitch was designed. Finite element analysis software was used to develop the model and three different bone qualities (Type II, Type III, and Type IV) were prepared. A vertical load of 200 N, and a horizontal load of 100 N was… More >

T. Kipouros¹, D.M. Jaeggi², W.N. Dawes³, G.T. Parks²,A.M. Savill¹, P.J. Clarkson²

CMES-Computer Modeling in Engineering & Sciences, Vol.37, No.1, pp. 1-44, 2008, DOI:10.3970/cmes.2008.037.001

Abstract An approach to support the computational aerodynamic design process is presented and demonstrated through the application of a novel multi-objective variant of the Tabu Search optimization algorithm for continuous problems to the aerodynamic design optimization of turbomachinery blades. The aim is to improve the performance of a specific stage and ultimately of the whole engine. The integrated system developed for this purpose is described. This combines the optimizer with an existing geometry parameterization scheme and a well-established CFD package. The system's performance is illustrated through case studies -- one two-dimensional, one three-dimensional -- in which flow characteristics important to the… More >

S. Aggoune¹, E.H. Amara¹, M. Debiane²

FDMP-Fluid Dynamics & Materials Processing, Vol.9, No.1, pp. 61-75, 2013, DOI:10.3970/fdmp.2013.009.061

Abstract The effects of inert assisting gas nature and velocity on laser cut quality are investigated. A pure fusion cutting process just above melting point is considered, where the molten steel velocity is given as a function of the two acting forces represented by the pressure gradient and the frictional forces applied by the laminar gas flow. In the case of nitrogen assisting gas, the stainless steel melt film exhibits a visible separation point. The point where the melt flow is separated out from the solid wall depends strongly on the gas velocity. It is pushed down the cut surface when… More >

N.I. Wakayama¹, D.C. Yin², J.W. Qi³

FDMP-Fluid Dynamics & Materials Processing, Vol.1, No.2, pp. 153-170, 2005, DOI:10.3970/fdmp.2005.001.153

Abstract The production of crystals of adequate size and high quality is the "bottleneck'' for three-dimensional structure analysis of protein crystals. In this work, in order to shed additional light on the (still controversial) beneficial effect of microgravity on crystal growth, we focus on recent advanced experimental and theoretical research about the effects of buoyancy-driven convection on protein crystallization. In the light of the numerical studies the following major outcomes can be highlighted: (1) when the crystal size exceeds several dozens of µm, buoyancy-driven convection dominates solute transport near the growing crystal and the crystal growth rate becomes larger than that… More >

Ma Ning^1,*, Jianhe Guan¹, Pingzeng Liu², Ziqing Zhang³, Gregory M. P. O’Hare⁴

CMC-Computers, Materials & Continua, Vol.58, No.1, pp. 215-227, 2019, DOI:10.32604/cmc.2019.03763

Abstract With the rapid development of China’s economy, the scale of the city has been continuously expanding, industrial enterprises have been increasing, the discharge of multiple pollutants has reached the top of the world, and the environmental problems become more and more serious. The air pollution problem is particularly prominent. Air quality has become a daily concern for people. In order to control air pollution, it is necessary to grasp the air quality situation in an all-round way. It is necessary to evaluate air quality. Accurate results of air quality evaluation can help people know more about air quality. In this… More >

Xiaodong Liu¹, Qi Liu^1,*

CMC-Computers, Materials & Continua, Vol.57, No.2, pp. 179-194, 2018, DOI:10.32604/cmc.2018.04025

Abstract In a home energy management system (HEMS), appliances are becoming diversified and intelligent, so that certain simple maintenance work can be completed by appliances themselves. During the measurement, collection and transmission of electricity load data in a HEMS sensor network, however, problems can be caused on the data due to faulty sensing processes and/or lost links, etc. In order to ensure the quality of retrieved load data, different solutions have been presented, but suffered from low recognition rates and high complexity. In this paper, a validation and repair method is presented to detect potential failures and errors in a domestic… More >

Tiejun Wang¹, Tao Wu^1,*, Amir Homayoon Ashrafzadeh², Jia He¹

CMC-Computers, Materials & Continua, Vol.57, No.1, pp. 81-96, 2018, DOI:10.32604/cmc.2018.03259

Abstract Crowdsourcing is widely used in various fields to collect goods and services from large participants. Evaluating teaching quality by collecting feedback from experts or students after class is not only delayed but also not accurate. In this paper, we present a crowdsourcing-based framework to evaluate teaching quality in the classroom using a weighted average operator to aggregate information from students’ questionnaires described by linguistic 2-tuple terms. Then we define crowd grade based on similarity degree to distinguish contribution from different students and minimize the abnormal students’ impact on the evaluation. The crowd grade would be updated at the end of… More >