Molecular & Cellular Biomechanics, Vol.3, No.4, pp. 179-180, 2006, DOI:10.32604/mcb.2006.003.179

Abstract This article has no abstract. More >

C. N. Rios¹, J. N. Augustine¹, A. B. Mathur¹

Molecular & Cellular Biomechanics, Vol.3, No.4, pp. 173-174, 2006, DOI:10.32604/mcb.2006.003.173

Abstract This article has no abstract. More >

Lilan Gao^1,2,*, Qingxian Yuan^1,2, Ruixin Li^3,*, Lei Chen^1,2, Chunqiu Zhang^1,2, Xizheng Zhang^1,2

Molecular & Cellular Biomechanics, Vol.15, No.2, pp. 85-98, 2018, DOI: 10.3970/mcb.2018.00329

Abstract Silk fibroin-typeⅡcollagen scaffold was made by 3D printing technique and freeze-drying method, and its mechanical properties were studied by experiments and theoretical prediction. The results show that the three-dimensional silk fibroin-typeⅡ collagen scaffold has good porosity and water absorption, which is (89.3%+3.26%) and (824.09%+93.05%), respectively. With the given strain value, the stress of scaffold decreases rapidly firstly and then tends to be stable during the stress relaxation. Both initial and instantaneous stresses increase with increase of applied strain value. The creep strains of scaffold with different stress levels show the two stages: the rapidly increasing stage and the second stable… More >

Pranav S. Sapkal^1,*, Abhaykumar M. Kuthe¹, Shantanu Mathankar², Akash A. Deshmukh

Molecular & Cellular Biomechanics, Vol.14, No.2, pp. 125-136, 2017, DOI:10.3970/mcb.2017.014.123

Abstract β-TCP-Zirconia scaffolds with different architectures were fabricated by means of 3D-Bioplotting in order to enhance the mechanical and in-vitro ability of the scaffold to heal large size bone defects. In the present study scaffold architecture with different strand orientations (0°-90°, 0°-45°-135°-180°, 0°-108°-216° and 0°-72°-144°-36°-108°) were fabricated, characterized and evaluated for mechanical strength and cell proliferation ability. β-TCP powder (25 µm) and PVA (Polyvinyl Alcohol) was acquired from Fisher Scientific, India. Zirconia (18 to 32 µm) was procured from Lobachemie, India. In brief 7.5%, PVA in distilled water was used as a binder and was mixed with 10 grams of (70/30)… More >

Pranav S. Sapkal^1*, Abhaykumar M. Kuthe¹, Divya Ganapathy², Shantanu C. Mathankar³, Sudhanshu Kuthe⁴

Molecular & Cellular Biomechanics, Vol.13, No.2, pp. 115-136, 2016, DOI:10.3970/mcb.2016.013.131

Abstract Biphasic calcium phosphate scaffolds with 20/80 HA/TCP ratio were fabricated using the 3D-Bioplotting system to heal critical size defects in rabbit tibia bone. Four different architectures were printed in a layer by layer fashion with lay down patterns viz. (a) 0°– 90°, (b) 0°– 45°– 90°– 135°, (c) 0°–108°– 216° and (d) 0°– 60°– 120°. After high-temperature sintering scaffolds were coated with collagen and were further characterized by (FTIR) Fourier Transform Infrared Spectroscopy, (SEM) Scanning Electron Microscopy, (XRD) X-Ray diffraction, Porosity analysis and Mechanical testing. Scaffold samples were tested for its ability to induce cytotoxicity in Balb/c 3T3 cells at… More >

Marco A.Velasco^∗, Diego A. Garzón-Alvarado^†

Molecular & Cellular Biomechanics, Vol.10, No.2, pp. 137-157, 2013, DOI:10.3970/mcb.2013.010.137

Abstract The design of porous scaffolds for tissue engineering requires methods to generate geometries in order to control the stiffness and the permeability of the implant among others characteristics. This article studied the potential of the reaction-diffusion systems to design porous scaffolds for bone regeneration. We simulate the degradation of the scaffold material and the formation of new bone tissue over canal-like, spherical and ellipsoid structures obtained by this approach. The simulations show that the degradation and growth rates are affected by the form of porous structures. The results have indicated that the proposed method has potential as a tool to… More >

Idalba A. Hidalgo A.^∗, Felipe Sojo^†, Francisco Arvelo^†, Marcos A. Sabino^∗,‡

Molecular & Cellular Biomechanics, Vol.10, No.2, pp. 85-105, 2013, DOI:10.3970/mcb.2013.010.085

Abstract The electrospinning technique is a method used to produce nano and microfibers using the influence of electrostatic forces. Porous three dimensional networks of continuous and interconnected fibers as scaffolds were obtained from a poly (lactic acid) solution. The concentration of the polymeric solution, 12.5% m/w, as well as the conditions of voltage (V=11kV) and tip-metallic collector distance (H=13cm) were established to develop these scaffolds through the electrospinning process. The characteristics of the scaffolds, such as fiber diameter, sintering and the biomimetics of the characteristics of a native extra cellular matrix were verified by Scanning Electron Microscopy (SEM). The orientation induced… More >

Masanori Kobayashi, Myron Spector

Molecular & Cellular Biomechanics, Vol.6, No.4, pp. 217-228, 2009, DOI:10.3970/mcb.2009.006.217

Abstract In order to achieve successful wound repair by regenerative tissue engineering using mesenchymal stem cells (MSCs), it is important to understand the response of stem cells in the scaffold matrix to mechanical stress.
To investigate the clinical effects of mechanical stress on the behavior of cells in scaffolds, bone marrow-derived mesenchymal stem cells (MSCs) were grown on a type-I collagen-glycosaminoglycan (GAG) scaffold matrix for one week under cyclic stretching loading conditions.
The porous collagen-GAG scaffold matrix for skin wound repair was prepared, the harvested canine MSCs were seeded on the scaffold, and cultured under three kinds of cyclic… More >

K.W. Luczynski¹, A. Dejaco¹, O. Lahayne¹, J. Jaroszewicz², W.Swieszkowski², C. Hellmich¹

CMES-Computer Modeling in Engineering & Sciences, Vol.87, No.6, pp. 505-529, 2012, DOI:10.3970/cmes.2012.087.505

Abstract A 71 volume-% macroporous tissue engineering scaffold made of poly-l-lactide (PLLA) with 10 mass-% of pseudo-spherical tri-calcium phosphate (TCP) inclusions (exhibiting diameters in the range of several nanometers) was microCT-scanned. The corresponding stack of images was converted into regular Finite Element (FE) models consisting of around 100,000 to 1,000,000 finite elements. Therefore, the attenuation-related, voxel-specific grey values were converted into TCP-contents, and the latter, together with nanoindentation tests,entered a homogenization scheme of the Mori-Tanaka type, as to deliver voxel-specific (and hence, finite element-specific) elastic properties. These FE models were uniaxially loaded, giving access to the macroscopic Young's modulus of the… More >

G. Mattei^1,2, A. Tirella^1,2, A. Ahluwalia^1,2

CMES-Computer Modeling in Engineering & Sciences, Vol.87, No.6, pp. 483-504, 2012, DOI:10.3970/cmes.2012.087.483

Abstract Biological function is intricately linked with structure. Many biological structures are characterised by functional spatially distributed gradients in which each layer has one or more specific functions to perform. Reproducing such structures is challenging, and usually an experimental trial-and-error approach is used. In this paper we investigate how the gravitational sedimentation of discrete solid particles (secondary phase) within a primary fluid phase with a time-varying dynamic viscosity can be used for the realisation of stable and reproducible continuous functionally graded materials (FGMs). Computational models were used to simulate the distribution of a particle phase in a fluid domain. Firstly a… More >