Syed Muhammad Saqlain Shah^1,*, Tahir Afzal Malik², Robina khatoon¹, Syed Saqlain Hassan³, Faiz Ali Shah⁴

CMC-Computers, Materials & Continua, Vol.61, No.2, pp. 535-553, 2019, DOI:10.32604/cmc.2019.07948

Abstract Classification of human actions under video surveillance is gaining a lot of attention from computer vision researchers. In this paper, we have presented methodology to recognize human behavior in thin crowd which may be very helpful in surveillance. Research have mostly focused the problem of human detection in thin crowd, overall behavior of the crowd and actions of individuals in video sequences. Vision based Human behavior modeling is a complex task as it involves human detection, tracking, classifying normal and abnormal behavior. The proposed methodology takes input video and applies Gaussian based segmentation technique followed by post processing through presenting… More >

Chang Kook Oh¹, Hoon Sohn¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.8, No.3, pp. 91-100, 2008, DOI:10.3970/icces.2008.008.091

Abstract Structural Health Monitoring (SHM) is concerned with identifying damage based on measurements obtained from structures being monitored. For the civil structures exposed to time-varying environmental and operational conditions, it is inevitable that environmental and operational variability produces an adverse effect on the dynamic behaviors of the structures. Since the signals are measured under the influence of these varying conditions, normalizing the data to distinguish the effects of damage from those caused by the environmental and operational variations is important in order to achieve successful structural health monitoring goals. In this paper, kernel principal component analysis (kernel PCA) using unsupervised support… More >

C. K. Madhusudana¹, N. Gangadhar¹, Hemantha Kumar, Kumar,^*,1, S. Narendranath¹

Structural Durability & Health Monitoring, Vol.12, No.2, pp. 111-127, 2018, DOI: 10.3970/sdhm.2018.01262

Abstract This paper presents the fault diagnosis of face milling tool based on machine learning approach. While machining, spindle vibration signals in feed direction under healthy and faulty conditions of the milling tool are acquired. A set of discrete wavelet features is extracted from the vibration signals using discrete wavelet transform (DWT) technique. The decision tree technique is used to select significant features out of all extracted wavelet features. C-support vector classification (C-SVC) and ν-support vector classification (ν-SVC) models with different kernel functions of support vector machine (SVM) are used to study and classify the tool condition based on selected features.… More >

Caining Zhang¹, Huaguang Li², Xiaoya Guo³, David Molony⁴, Xiaopeng Guo², Habib Samady⁴, Don P. Giddens^4,5, Lambros Athanasiou⁶, Rencan Nie^2,*, Jinde Cao^3,*, Dalin Tang^1,*,7

Molecular & Cellular Biomechanics, Vol.16, No.2, pp. 153-161, 2019, DOI:10.32604/mcb.2019.06873

Abstract Cardiovascular diseases are closely associated with deteriorating atherosclerotic plaques. Optical coherence tomography (OCT) is a recently developed intravascular imaging technique with high resolution approximately 10 microns and could provide accurate quantification of coronary plaque morphology. However, tissue segmentation of OCT images in clinic is still mainly performed manually by physicians which is time consuming and subjective. To overcome these limitations, two automatic segmentation methods for intracoronary OCT image based on support vector machine (SVM) and convolutional neural network (CNN) were performed to identify the plaque region and characterize plaque components. In vivo IVUS and OCT coronary plaque data from 5… More >

Yuxiang Huang¹, Chuliu He¹, Jiaqiu Wang², Yuehong Miao¹, Tongjin Zhu¹, Ping Zhou¹, Zhiyong Li^1,2,*

Molecular & Cellular Biomechanics, Vol.15, No.2, pp. 117-125, 2018, DOI: 10.3970/mcb.2018.02478

Abstract Intravascular optical coherence tomography (IVOCT) is becoming more and more popular in clinical diagnosis of coronary atherosclerotic. However, reading IVOCT images is of large amount of work. This article describes a method based on image feature extraction and support vector machine (SVM) to achieve semi-automatic segmentation of IVOCT images. The image features utilized in this work including light attenuation coefficients and image textures based on gray level co-occurrence matrix. Different sets of hyper-parameters and image features were tested. This method achieved an accuracy of 83% on the test images. Single class accuracy of 89% for fibrous, 79.3% for calcification and… More >

Hu Wang¹, Weiyi Li¹, Guangyao Li¹

CMC-Computers, Materials & Continua, Vol.28, No.2, pp. 121-146, 2012, DOI:10.3970/cmc.2012.028.121

Abstract The purpose of this study is to propose a robust inverse method for estimating Johnson-Cook material parameters. The method is shown through illustrative examples for two different advanced high strength steel (AHSS) materials (DP980 and TRIP780) using set of data from impact experiments with different velocities. Compared with widely mixed numerical experimental methods, the suggested inverse method has the capability to guarantee the robustness of the obtained parameters by considering uncertainties. The inverse problem is converted into multi-objective optimization problems. Furthermore, in order to improve the performance in efficiency and accuracy, metamodeling techniques and global optimization method are integrated. The… More >

Zhen Yang¹, Xingsheng Gu², Xiaoyi Liang^1,3

CMES-Computer Modeling in Engineering & Sciences, Vol.74, No.3&4, pp. 161-182, 2011, DOI:10.3970/cmes.2011.074.161

Abstract Mesoporous carbons are synthesized by organic-organic self-assembly of triblock copolymer F127 and a new type of carbon precursor as resorcinol-furfural oligomers. Some factors will impact the mesoporous carbons pore structure and properties were studied. The main factors, such as the ratio of triblock copolymer F127 and oligomers, degree of polymerizstry of resorcinol-furfural oligomers, the ratio of resorcinol-furfural oligomers - F/R, and their mutual relations were identified. Aimed at balancing the complex characteristic of mesoporous structure and adsorption properties, a classification and optimization model based on support vector machine is developed. The optimal operation conditions of Barret-Joyner-Halenda (BJH) adsorption cumulative volume… More >

Sifan Long¹, Ming Zhao^2,*, Xinfu He³

CMC-Computers, Materials & Continua, Vol.58, No.3, pp. 727-760, 2019, DOI:10.32604/cmc.2019.04454

Abstract With the development of society and the exhaustion of fossil energy, researcher need to identify new alternative energy sources. Nuclear energy is a very good choice, but the key to the successful application of nuclear technology is determined primarily by the behavior of nuclear materials in reactors. Therefore, we studied the radiation performance of the fusion material reduced activation ferritic/martensitic (RAFM) steel. The main novelty of this paper are the statistical analysis of RAFM steel data sets through related statistical analysis and the formula derivation of the gradient descent method (GDM) which combines the gradient descent search strategy of the… More >

Xiangyan Tang^1,2, Liang Wang³, Jieren Cheng^1,2,4,*, Jing Chen², Victor S. Sheng⁵

CMC-Computers, Materials & Continua, Vol.58, No.2, pp. 463-491, 2019, DOI:10.32604/cmc.2019.03816

Abstract The accuracy of predicting the Producer Price Index (PPI) plays an indispensable role in government economic work. However, it is difficult to forecast the PPI. In our research, we first propose an unprecedented hybrid model based on fuzzy information granulation that integrates the GA-SVR and ARIMA (Autoregressive Integrated Moving Average Model) models. The fuzzy-information-granulation-based GA-SVR-ARIMA hybrid model is intended to deal with the problem of imprecision in PPI estimation. The proposed model adopts the fuzzy information-granulation algorithm to pre-classification-process monthly training samples of the PPI, and produced three different sequences of fuzzy information granules, whose Support Vector Regression (SVR) machine… More >

Junjia Chen¹, Wei Lu^1,2,*, Yuileong Yeung¹, Yingjie Xue¹, Xianjin Liu¹, Cong Lin^1,3, Yue Zhang⁴

CMC-Computers, Materials & Continua, Vol.55, No.2, pp. 201-211, 2018, DOI:10.3970/cmc.2018.01781

Abstract In recent years, binary image steganography has developed so rapidly that the research of binary image steganalysis becomes more important for information security. In most state-of-the-art binary image steganographic schemes, they always find out the flippable pixels to minimize the embedding distortions. For this reason, the stego images generated by the previous schemes maintain visual quality and it is hard for steganalyzer to capture the embedding trace in spacial domain. However, the distortion maps can be calculated for cover and stego images and the difference between them is significant. In this paper, a novel binary image steganalytic scheme is proposed,… More >