R. Sedaghati, A. Suleman¹, S. Dost, B. Tabarrok²

CMES-Computer Modeling in Engineering & Sciences, Vol.2, No.2, pp. 259-272, 2001, DOI:10.3970/cmes.2001.002.259

Abstract A structural analysis and optimization method is developed to find the optimal topology of adaptive determinate truss structures under various impact loading conditions. The objective function is based on the maximization of the structural strength subject to geometric constraints. The dynamic structural analysis is based on the integrated finite element force method and the optimization procedure is based on the Sequential Quadratic Programming (SQP) method. The equilibrium matrix is generated automatically through the finite element analysis and the compatibility matrix is obtained directly using the displacement-deformation relations and the Single Value Decomposition (SVD) technique. By combining the equilibrium and the… More >

Enzo TONTI¹

CMES-Computer Modeling in Engineering & Sciences, Vol.2, No.2, pp. 237-258, 2001, DOI:10.3970/cmes.2001.002.237

Abstract We present a new numerical method for the solution of field equations. The essence of the method is to directly provide a discrete formulation of field laws, without using and requiring a differential formulation. It is proved that, for linear interpolation, the stiffness matrix so obtained coincides with the one of the Finite Element Method. For quadratic interpolation, however, the present stiffness matrix differs from that of FEM; moreover it is unsymmetric. It is shown that by using a parabolic interpolation, a convergence of the fourth order is obtained. This is greater than the one obtained with FEM, using the… More >

S.-P. Zhu¹

CMES-Computer Modeling in Engineering & Sciences, Vol.2, No.2, pp. 227-236, 2001, DOI:10.3970/cmes.2001.002.227

Abstract Problems defined on infinite domains must be treated on a finite computational domain. The treatment of the artificially placed boundaries (usually referred to as open boundaries) of such domain truncations can be quite subtle; an over truncation would normally result in large, undesirable reflection of signals back to the computational domain whereas an under truncation would imply an injudicious use of computational resources. In particular, problems occur when strongly nonlinear free surface waves generated in a numerical wave tank are passing through such an open boundary.
In this paper, some recent numerical test results of an innovative treatment of… More >

Chyou-Chi Chien, Tong-Yue Wu¹

CMES-Computer Modeling in Engineering & Sciences, Vol.2, No.2, pp. 213-226, 2001, DOI:10.3970/cmes.2001.002.213

Abstract This study presents a novel computational method for implementing the time finite element formulation for the equations of linear structural dynamics. The proposed method adopts the time-discontinuous Galerkin method, in which both the displacement and velocity variables are represented independently by second-order interpolation functions in the time domain. The solution algorithm derived utilizes a predictor/multi-corrector technique that can effectively obtain the solutions for the resulting system of coupled equations. The numerical implementation of the time-discontinuous Galerkin finite element method is verified through several benchmark problems. Numerical results are compared with exact and accepted solutions from previous literature. Since a fifth-order… More >

S. Rugonyi, K. J. Bathe¹

CMES-Computer Modeling in Engineering & Sciences, Vol.2, No.2, pp. 195-212, 2001, DOI:10.3970/cmes.2001.002.195

Abstract The solution of fluid flows, modeled using the Navier-Stokes or Euler equations, fully coupled with structures/solids is considered. Simultaneous and partitioned solution procedures, used in the solution of the coupled equations, are briefly discussed, and advantages and disadvantages of their use are mentioned. In addition, a simplified stability analysis of the interface equations is presented, and unconditional stability for certain choices of time integration schemes is shown. Furthermore, the long-term dynamic stability of fluid-structure interaction systems is assessed by the use of Lyapunov characteristic exponents, which allow differentiating between a chaotic and a regular system behavior. Some state-of-the-art numerical solutions… More >

M.Ganesh¹, D. Sheen²

CMES-Computer Modeling in Engineering & Sciences, Vol.2, No.2, pp. 183-194, 2001, DOI:10.3970/cmes.2001.002.183

Abstract A parallel numerical algorithm is introduced and analyzed for solving inhomogeneous initial-boundary value parabolic problems. The scheme is based on the method recently introduced in Sheen, Sloan, and Thomée (2000) for homogeneous problems. We give a method based on a suitable choice of multiple parameters. Our scheme allows one to compute solutions in a wide range of time. Instead of using a standard time-marching method, which is not easily parallelizable, we take the Laplace transform in time of the parabolic problems. The resulting elliptic problems can be solved in parallel. Solutions are then computed by a discrete inverse Laplace transformation.… More >

S.T. Lie¹, Guoyou Yu, Z. Zhao²

CMES-Computer Modeling in Engineering & Sciences, Vol.2, No.2, pp. 171-182, 2001, DOI:10.3970/cmes.2001.002.171

Abstract The BEM/FEM coupling procedure is applied to 2-D time domain structural-acoustic interaction problems. The acoustic domain for fluid or air is modeled by BEM scheme that is suitable for both finite and infinite domains, while the structure is modeled by FEM scheme. The input impact, which can be either plane waves or non-plane waves, can either be forces acting directly on the structural-acoustic system or be explosion sources. The far field or near field explosion sources which are difficult to be simulated by finite element modeling, can be simulated exactly by boundary element modeling as internal sources. In order to… More >

Haruhiko Kohno, Takahiko Tanahashi¹

CMES-Computer Modeling in Engineering & Sciences, Vol.2, No.2, pp. 155-170, 2001, DOI:10.3970/cmes.2001.002.155

Abstract Three-dimensional (3D) unsteady numerical simulations are carried out by means of the finite element method (FEM) with the generalized simplified marker and cell (GSMAC) method in silicon melt with a non-deformable free surface with Prandtl number Pr = 1.8534 × 10^-2, Marangoni number Ma = 0.0 - 6.2067 × 10², Grashof number Gr = 7.1104 × 10⁶, and the aspect ratio As = 1.0 in the Czochralski (CZ) method. The flow state becomes unstable earlier by increasing the absolute value of the thermal coefficient of surface tension in the range of σ_T =0.0 - 1.5 × 10^-5N/mK. Although the velocity… More >

K. Nishimura¹, N. Miyazaki²

CMES-Computer Modeling in Engineering & Sciences, Vol.2, No.2, pp. 143-154, 2001, DOI:10.3970/cmes.2001.002.143

Abstract In this paper, we present a classical molecular dynamics algorithm and its implementation on Cray C90 and Fujitsu VPP700. The characters of this algorithm consist in a grid based on the block division of the atomic system and a neighbor list based on the use of a short range potential. The computer program is used for large scale simulations on a Cray C90 and a 32-node VPP700, and measurements of computational performance are reported. Then, we examine the interaction between a crack propagating and a tilt grain boundary under uniaxial tension using this computer program. The Johnson potential for α-Fe… More >

H. Lin, S.N. Atluri¹

CMES-Computer Modeling in Engineering & Sciences, Vol.2, No.2, pp. 117-142, 2001, DOI:10.3970/cmes.2001.002.117

Abstract The truly Meshless Local Petrov-Galerkin (MLPG) method is extended to solve the incompressible Navier-Stokes equations. The local weak form is modified in a very careful way so as to ovecome the so-called Babus^~ka-Brezzi conditions. In addition, The upwinding scheme as developed in Lin and Atluri (2000a) and Lin and Atluri (2000b) is used to stabilize the convection operator in the streamline direction. Numerical results for benchmark problems show that the MLPG method is very promising to solve the convection dominated fluid mechanics problems. More >