Qinghua Wang¹, Junzheng Yang¹, Wei Luo^2,*

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.1, pp. 215-233, 2021, DOI:10.32604/fdmp.2021.011914

Abstract Well completions are generally used to connect a reservoir to the surface so that fluids can be produced from or injected into it. With these systems, pipe flows are typically established in the horizontal sections of slotted screen completions and inflow control device (ICD) completions; moreover, an annular flow exists in the region between the pipe and the borehole wall. On the basis of the principles of mass and momentum conservation, in the present study, a coupling model considering the variable mass flow of the central tubing, the variable mass flow of the annular tubing and the reservoir seepage is… More >

Yu Zhou^1,*, Shen Ji^2,*

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.1, pp. 189-200, 2021, DOI:10.32604/fdmp.2021.011744

Abstract The outbreak of Corona Virus (COVID-19) has spread over a large number of countries. The virus is typically transported inside liquid droplets produced by human beings. As a result, doctors operating in the consulting rooms of hospitals are potentially exposed to high risk. Taking into account the evaporation of droplets and using a hybrid Eulerian-Lagrangian framework to determine the airflow pattern and corresponding motion of droplets, in the present study, the motion of droplets is investigated with regard to the situation in which doctors check patients in front of their bed. A turbulence model (RNG k-ɛ) is used. The purification… More >

Mengyuan Cao, Yi Xu^*, Yilin Dong

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.1, pp. 123-139, 2021, DOI:10.32604/fdmp.2021.011443

Abstract The damage caused by thermal stress during rewarming vitrified biosamples is one of the major obstacles for clinical purposes. Magnetic warming is a highly effective approach to overcome this hurdle and can achieve rapid and spatially homogeneous heating. The current research investigates the effects of magnetic warming on the histological and biomechanical properties of the vitrified umbilical arteries (UAs) through experiments and simulation. The results of experiments show that, for the case of magnetic warming comparing with the conventional water bath, magnetic warming presents better preservation of extracellular matrix (ECM), collagen fibers, elastic fibers, and muscle fibers of the umbilical… More >

Ming Liu^1,2,3, Xingkai Zhang^1,4, Dong Wang^1,*

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.1, pp. 97-107, 2021, DOI:10.32604/fdmp.2021.011292

Abstract The mechanically choked orifice plate (MCOP) is a new type of device for flow control by which choking conditions for incompressible fluids can be obtained with relatively small pressure losses. Given the lack of relevant results and data in the literature, in the present study, we concentrate on the experimental determination of the flow coefficient for the annular orifice, the pressure distribution in the MCOP, and the characteristics of the choked flow itself. As confirmed by the experimental results, the Reynolds number, the orifice plate thickness, the plug taper, and the eccentricity have an obvious influence on the aforementioned flow… More >

Yuhang Long¹, Jingyi Wang^2,*

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.1, pp. 181-187, 2021, DOI:10.32604/fdmp.2021.011185

Abstract This study considers P.O42.5 cement from different sources and evaluates the related surplus coefficient (defined as the proportionality factor linking the measured compressive strength value of the cement after 28 days to the “standard” value of cement strength). The needed tests have been conducted using a mixer, a pressure testing machine, a flexural testing machine, a vibrating table a ramming rod, a feeder and a metal ruler. The average value of the measured cement strength surplus coefficient of cement produced by five distinct cement manufacturers has been found to be 1.16. These results can be used as the basis to… More >

Ling Cheng^1,2,3,*, Bingqing Guo^1,2, Kecheng Li^1,2

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.1, pp. 49-70, 2021, DOI:10.32604/fdmp.2021.011062

Abstract The performances of a hybrid energy system for decentralized heating are investigated. The proposed energy system consists of a solar collector, an air-source heat pump, a gas-fired boiler and a hot water tank. A mathematical model is developed to predict the operating characteristics of the system. The simulation results are compared with experimental data. Such a comparison indicates that the model accuracy is sufficient. The influence of the flat plate solar collector area on the economic and energy efficiency of such system is also evaluated through numerical simulations. Finally, this system is optimized using the method of orthogonal design. The… More >

Mohamad Shukri Zakaria^1,*, Haslina Abdullah², Azmi Nordin¹, Syazwati Ahmad Zaki¹

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.1, pp. 171-179, 2021, DOI:10.32604/fdmp.2021.010974

Abstract This study deals with the interaction of blood flow with the wall aorta, i.e., the boundary of the main artery that transports blood in the human body. The problem is addressed in the framework of computational fluid dynamics complemented with (FSI), i.e., a fluid-structure interaction model. Two fundamental types of wall are considered, namely a flexible and a rigid boundary. The resulting hemodynamic flows are carefully compared in order to determine which boundary condition is more effective in reproducing reality. Special attention is paid to wall shear stress (WSS), a factor known for its ability to produce atherosclerosis and bulges.… More >

Daoming Shen^1,*, Xia Zhang², Jinhong Xia¹, Shunqun Li³

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.1, pp. 21-37, 2021, DOI:10.32604/fdmp.2021.010767

Abstract The freezing of soil containing a liquid is a complex transient heat conduction problem involving phase change and release or absorption of latent heat. Existing efforts have essentially focused on theoretical research and numerical simulations. In the present study, the problem is approached from an experimental point of view using the so-called “freezing model test” method. In particular, in order to establish a precise relationship between the model and the prototype, a temperature similarity criterion is derived using the condition of an equal number of Kosovitch. Similarity is also established with respect to other aspects. A similarity criterion for the… More >

Taidong Xu^1,2, Hao Liu², Dejun Zhang^1,2, Yadong Li², Xiaoming Zhou^2,*

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.1, pp. 109-121, 2021, DOI:10.32604/fdmp.2021.010608

Abstract With the progressive increase in the number of transistors that can be accommodated on a single integrated circuit, new strategies are needed to extract heat from these devices in an efficient way. In this regard methods based on the combination of the so-called “jet impingement” and “micro-channel” approaches seem extremely promising for possible improvement and future applications in electronics as well as the aerospace and biomedical fields. In this paper, a hybrid heat sink based on these two technologies is analysed in the frame of an integrated model. Dedicated CFD simulation of the coupled flow/temperature fields and orthogonal tests are… More >

Sheng Bai, Feng Bao^*, Fengzhi Zhao

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.1, pp. 39-47, 2021, DOI:10.32604/fdmp.2021.010376

Abstract The present study aims to improve the efficiency of typical procedures used for post-processing flow field data by applying a neural-network technology. Assuming a problem of aircraft design as the workhorse, a regression calculation model for processing the flow data of a FCN-VGG19 aircraft is elaborated based on VGGNet (Visual Geometry Group Net) and FCN (Fully Convolutional Network) techniques. As shown by the results, the model displays a strong fitting ability, and there is almost no over-fitting in training. Moreover, the model has good accuracy and convergence. For different input data and different grids, the model basically achieves convergence, showing… More >