Xinke Yang¹, Shanzhi Shi¹, Hui Zhang¹, Yuzhe Yang^2,3, Zilong Liu^2,3, Ruiquan Liao^2,3,*, Joseph X. F. Ribeiro⁴

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.2, pp. 371-383, 2021, DOI:10.32604/fdmp.2021.011486

Abstract The accurate prediction of the pressure distribution of highly viscous fluids in wellbores and pipelines is of great significance for heavy oil production and transportation. The flow behavior of high-viscosity fluids is quite different with respect to that of low-viscosity fluids. Currently, the performances of existing pressure-drop models seem to be relatively limited when they are applied to high-viscosity fluids. In this study, a gas-liquid two-phase flow experiment has been carried out using a 60 mm ID horizontal pipe with air and white oil. The experimental results indicate that viscosity exerts a significant influence on the liquid holdup and pressure… More >

Neil Stephen Lopez^1,*, Selena Kay Galeos¹, Brian Raphael Calderon¹, David Roy Dominguez¹, Bryan Joseph Uy¹, Rupesh Iyengar²

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.2, pp. 333-347, 2021, DOI:10.32604/fdmp.2021.011213

Abstract The underfloor air distribution (UFAD) system has not been able to penetrate the residential and commercial air conditioning industry significantly until now. To date, the most notable applications are found in datacenters because of their more demanding thermal stratification and cooling requirements. In addition to highlighting the advantages of the UFAD system over the traditional overhead (OH) system, this study compares various ventilation layouts for a UFAD system. Four different UFAD ventilation layouts are compared and one OH layout. The results show that using multiple swirl-type diffusers creates a more uniform floor-to-knee temperature and less air recirculation than the rectangular… More >

Li-an Zhao^1,*, Tieli Wang²

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.2, pp. 413-426, 2021, DOI:10.32604/fdmp.2021.011205

Abstract The transportation in vertical pipelines of particle slurry of oil shale has important applications in several fields (marine mining, hydraulic mining, dredging of river reservoir, etc.). However, there is still a lack of information about the behavior of coarse particles in comparison to that of fine particles. For this reason, experiments on the fluidization and hydraulic lifting of coarse oil shale particles have been carried out. The experimental data for three kinds of particles with an average size of 5 mm, 15 mm and 25 mm clearly demonstrate that vortices can be formed behind the particles. On this basis, a… More >

Ruixin Zhao^1,*, Zhongju Feng¹, Guan Jiang¹, Fuchun Wang¹, Yidong Zhang², Changan Zhang³, Zhenbing Wang¹

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.2, pp. 441-453, 2021, DOI:10.32604/fdmp.2021.010595

Abstract The present study examines the working conditions of fully grouted bolts used for the construction and expansion of high slopes. On the basis of a pull out destructive test, the work load and the ultimate load are obtained on site, and the Flac3d numerical simulation method is employed to determine the axial force distribution and the effective anchor length. The test results show that (1) the Q-S (load-displacement) curve of the bolt displays a certain degree of deformation coupled with the creep of the surrounding rock; (2) the working load of the bolt is closely related to the sliding deformation… More >

Zongkai Liu^1,2,*

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.2, pp. 427-439, 2021, DOI:10.32604/fdmp.2021.010528

Abstract The so-called surface Magneto-hydro-dynamic (MHD) propulsion relies on the Lorentz force induced in weak electrolyte solutions (such as seawater or plasma) by NdFeB Magnets. The Lorentz force plays an important role in such dynamics as it directly affects the structures of flow boundary layers. Previous studies have mainly focused on the development of such boundary layers and related fluid-dynamic aspects. The main focus of the present study is the determination of electromagnetic field distributions around the propulsion units. In particular dedicated experiments and numerical simulations (based on the finite volume method) are conducted considering a NACA0012 airfoil immersed in seawater.… More >

Ke Sun, Xiaoyu Hu, Da Li, Guodong Zhang, Kui Zhao, Haiyang Zhao, Shuzhan Bai^*

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.1, pp. 81-95, 2021, DOI:10.32604/fdmp.2021.013895

Abstract Experiments on subcooled flow boiling have been conducted using water in a rectangular flow channel. Similar to the coolant channel in internal combustion engines (IC engines), the flow channel in this experiment was asymmetrically heated. Bubble images were captured using a high speed camera from the side view of the channel. The experimental conditions in terms of bulk temperature, bulk velocity, pressure and heat flux ranged from 65°C–75°C, 0.25 m/s–0.75 m/s, 1–1.7 bar and 490 kW/m²–700 kW/m², respectively. On the basis of these tests, a statistical analysis of the bubble size has been conducted considering a population of 1400 samples.… More >

Khadija A. Al-Hassani¹, M. S. Alam², M. M. Rahman^1,*

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.1, pp. 1-20, 2021, DOI:10.32604/fdmp.2021.013497

Abstract Nanofluids have enjoyed a widespread use in many technological applications due to their peculiar properties. Numerical simulations are presented about the unsteady behavior of mixed convection of Fe₃O₄-water, Fe₃O₄- kerosene, Fe₃O₄-ethylene glycol, and Fe₃O₄-engine oil nanofluids inside a lid-driven triangular cavity. In particular, a two-component non-homogeneous nanofluid model is used. The bottom wall of the enclosure is insulated, whereas the inclined wall is kept a constant (cold) temperature and various temperature laws are assumed for the vertical wall, namely: θ = 1(Case 1), θ = Y(1 – Y)(Case 2), and θ = sin(2πY)(Case 3). A tilted magnetic field of uniform… More >

Shidan Chi¹, Tao Luan^1,*, Yan Liang², Xundong Hu², Yan Gao^3,*

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.1, pp. 71-80, 2021, DOI:10.32604/fdmp.2021.013178

Abstract Improving the primary steam parameters is one of the most direct ways to improve the cycle efficiency of a power generation system. In the present study, the typical problem connected to the excessively high superheat degree of extraction steam in an ultra-supercritical (USC) double-reheat unit is considered. Using a 1000 MW power plant as an example, two systems (case 1 and case 2) are proposed, both working in combination with a regenerative steam turbine. The thermal performances of these two systems are compared with that of the original system through a heat balance method and an exergy balance strategy. The… More >

Senchun Miao^1,2,*, Hongbiao Zhang¹, Fengxia Shi¹, Xiaohui Wang¹, Xijin Ma¹

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.1, pp. 201-214, 2021, DOI:10.32604/fdmp.2021.012950

Abstract A volute is a curved funnel with cross-sectional area increasing towards the discharge port. The volute of a centrifugal pump is the casing hosting the fluid being pumped by the impeller. In Pump-as-turbine devices (PAT), vice versa the volute plays the role of energy conversion element. In the present analysis, this process is analyzed using CFD. The results show that in the contraction section of volute the conversion between dynamic pressure energy and static pressure energy essentially depends on the reduction of flow area, while in the spiral section, frictional losses also play a significant role. From the throat to… More >

Siqi Liu^1,2,3, Guanqi Huang^3,4,*

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.1, pp. 141-157, 2021, DOI:10.32604/fdmp.2021.011990

Abstract Many countries in the world have experienced extremely rapid urbanization during recent decades. The rapid development of densely populated areas has produced many urban environmental problems. This research explores the relationship between urban morphology and ventilation conditions. Through 3D modeling and Computational Fluid Dynamics (CFD) simulation, we focus on the large scale ventilation of an extended area with several buildings. As a testbed, in particular, the core part of Kwun Tong industrial park in Hong Kong is examined, and in order to validate the approach, 10 measurement points are used to get experimental values to be used for comparison (such… More >