Doudou Liu^1,*, Liang Qiao^2,3, Guozhong Li⁴

Journal of Renewable Materials, Vol.10, No.6, pp. 1675-1691, 2022, DOI:10.32604/jrm.2022.018397

Abstract Construction and demolition (C&D) waste has seriously affected the ecological environment. The utilization of C&D waste resources can greatly alleviate this problem, and it is an important way to help achieve the goal of zero carbon in 2050. In this study, insulation concrete blocks were developed with recycled aggregates, cement, fly ash as main raw materials, expanded polystyrene (EPS) insulation boards as block insulation filling material, and self-developed construction waste composite activator, interface enhancer, surface modifier and other additives. Through experimental research and performance test analysis, the best mix ratio of the product and the mechanism of each additive were… More >

Liang Song^1,2,3, Guoqiang Zhang², Hongfei Xie², Jie Gao^4,*

Journal of Renewable Materials, Vol.10, No.6, pp. 1659-1674, 2022, DOI:10.32604/jrm.2022.018335

Abstract Crumble rubber (CR) can be used to prepare CR and styrene-butadiene-styrene (SBS) composite modified asphalt with a good high-and low-temperature performance, meanwhile the addition of CR could work as the substitute for SBS and help reduce the content of SBS. This study contains three main parts: effect of preparation and effect of material composition as well as rheological performance characterization. Factors during the preparation, including shearing temperature, shearing time, mixing time and swelling time, were selected, while base binder, CR content, CR particle size and SBS content in material composition were considered. The effects of these factors were assessed in… More >

Yanmin Li^1,2, Guifeng Zhao^2,3, Yuhong Ma^1,2,*, Rong Liu^1,2

Journal of Renewable Materials, Vol.10, No.6, pp. 1641-1658, 2022, DOI:10.32604/jrm.2022.018277

Abstract An artificially accelerated alternation of aging and seawater erosion test of rubber materials used in lead rubber bearing (LRB) was performed, mainly to study the time-varying laws of rubber materials mechanical properties. Time-varying laws of the Mooney–Rivlin and Neo-Hookean constitutive parameters of rubber materials under the alternation of aging and seawater erosion were also analyzed. Results indicate that the rubber material mechanical properties were significantly affected by alternation of aging and seawater erosion. Hardness and elongation stress increased exponentially with test time. And 120 days after the test, the hardness increased by 14%, the maximum percentage increase in stress of… More >

Yifei Yin, Lirong Qu, Weidong Lu^*, Chengshuai Li

Journal of Renewable Materials, Vol.10, No.6, pp. 1517-1535, 2022, DOI:10.32604/jrm.2022.018149

Abstract Creep test results of glulam members under compression and bending were studied in this paper. The creep tests were conducted to investigate the influence of the stress level and relative eccentricity on the creep deformation of glulam members. The test results showed that the creep deformation trends of glulam members under long-term compression and bending loading were similar; the creep deformation increased with increases in both the stress level and relative eccentricity. However, the relative creep deformation decreased with the increase in both the stress level and relative eccentricity under long-term loading, and a five-parameter creep model was proposed to… More > Graphic Abstract

Arunjunai Raj Mahendran^*, Günter Wuzella, Stefan Pichler, Herfried Lammer

Journal of Renewable Materials, Vol.10, No.6, pp. 1505-1516, 2022, DOI:10.32604/jrm.2022.017835

Abstract The objective of this work is to carry out the chemical treatment for the hemp fabrics in a closed vacuum system and to prepare bio-based composites using treated hemp fabrics. The change in surface tension of the treated fabrics was measured using contact angle measurement and the wetting behavior using a tensiometer. Bio-based composites were fabricated using bio-based epoxy resin and different chemically treated fabrics. The flexural strength and dynamic water absorption behavior of the composites were characterized. The acetylated fabrics showed very good wetting behavior, and the contact angle values were marginally low compared to other treatment techniques. The… More > Graphic Abstract

Wissem Sahmim, Georges Eid, Febrina Dellarose Boer, Hubert Chapuis, Philippe Gérardin, Christine Gérardin-Charbonnier^*

Journal of Renewable Materials, Vol.10, No.6, pp. 1491-1503, 2022, DOI:10.32604/jrm.2022.016364

Abstract This study evaluated the methods of grafting commercial catechin with fatty acids, namely capric acid (C10), lauric acid (C12), and myristic acid (C14) through esterification. Specimens of beech wood (Fagus sylvatica L.) were impregnated with catechin and modified catechin-fatty acids, separately, at a 5% concentration diluted in ethanol using vacuum pressure treatment and subjected to leaching. The weight percentage gain before leaching (WPG), after leaching (WPGAL), and weight loss due to leaching (PL) were investigated. Both leached and unleached samples were tested against white-rot fungi (Trametes versicolor) in Petri-dishes for twelve weeks. Results show that samples treated with modified catechin-fatty… More > Graphic Abstract

Yingying Hu^1,#, Bowen Yan^1,#, Zhefan Stephen Chen², Lei Wang³, Wei Tang¹ and Caoxing Huang^1,*

Journal of Renewable Materials, Vol.10, No.6, pp. 1471-1490, 2022, DOI:10.32604/jrm.2022.018811

Abstract Polyphenol is an important secondary metabolite with unique physiological functions and biological activity. The polyphenols in different plants and biomass have different chemical structures, which needs various extraction methods to obtain them. Recently, plant polyphenols and their application research in food and medicine have become a research hotspot, which is mainly focused on preparation, purification, structural identification, and biological activity assays. Among these researches, extraction and separation are the key sections to investigate the structure and activity of polyphenol. Hence, this review summarized the recent extraction and separation techniques of polyphenol, including solvent extraction, supercritical fluid extraction, ultrasonic extraction, enzymatic… More > Graphic Abstract

Mohammad Jawaid¹, Lau Kia Kian¹, Hassan Fouad², Ramzi Khiari^3,4,5,*, Othman Y. Alothman⁶, Mohamed Hashem⁷

Journal of Renewable Materials, Vol.10, No.6, pp. 1459-1470, 2022, DOI:10.32604/jrm.2022.018415

Abstract Cellulose nanocrystal (CNC) is a biomaterial derived from plant lignocellulosic components, widely applied in various industrial fields. Concurrently, with the growth of awareness in developing green nanomaterial, the explored Washingtonia fibre could be alternative biomass for obtaining CNC products. In the present work, different acid concentrations of 5%, 15%, and 25% hydrochloric solutions were employed to produce CNCs from Washingtonia fibre. With the chemical treatments, the yield of the CNC product was successfully retained at 21.6%−25.1%. Individually separated and needle-shaped CNC particles could be observed under the microscopic viewing with the increased acid concentrations. From elemental analysis, a relatively pure… More > Graphic Abstract

Li Wang^1,2,#, Rongbai Tong^3,#, Juanli Wang^1,2,*, Jintao Wan^1,2,*, Yuhu Li^1,2, Pujun Jin^1,2, Daodao Hu^1,2

Journal of Renewable Materials, Vol.10, No.5, pp. 1349-1364, 2022, DOI:10.32604/jrm.2022.019372

Abstract Quest for bio-based halogen-free green flame retardant has attracted many concerns in recent years. Herein a reactive functional flame retardant containing phosphorus VDP is synthesized from vanillin, 9,10-dihydro-9-oxa-10-phosphophene-10-oxide (DOPO) and phenol via a facile way. VDP is characterized with ¹H NMR, ³¹P NMR, FTIR and Time of Flight Mass Spectrometry, and used as a new reactive flame retardant for bisphenol epoxy thermosets. Thermogravimetry analysis shows that when the VDP loading is only 0.5P% (based on phosphorus content), the residue increases from 14.2% to 21.1% at 750°C in N₂ compare with neat DGEBA. Correspondingly, the limit oxygen index increased to 29.6%,… More >

Chengcheng Wang^1,2,*, Dawei Luo¹, Bingxue Hou³, Mortaza Gholizadeh⁴, Zanxiong Tan¹, Xiaojie Han¹

Journal of Renewable Materials, Vol.10, No.5, pp. 1337-1348, 2022, DOI:10.32604/jrm.2022.018770

Abstract It is critical to study efficient, stable oxygen reduction reaction (ORR) electrocatalysts due to insufficient stability and expensive price of Pt/C catalysts for Zn-air batteries. Fe–N–C electrocatalysts was synthesized by a facile solvent-green method and the efficiency of Fe–N–C optimized was studied as potential ORR electrocatalysts under alkaline condition. Results indicated that it had excellent ORR activity with E_1/2 of 0.93 V, which was competitive to that of Pt/C-JM under the same conditions. Moreover, the assembled Zn-air battery exhibited discharge potential and charge potential of 1.2 V, 2.32 V at 5 mA cm⁻² with high stability, respectively. Overall, all results illustrated… More > Graphic Abstract