Usama Sayed^1,2, Assima Dauletbek^1,2, Xue Xin^1,2, Rodolfo Lorenzo³, Haitao Li^1,2,*

Journal of Renewable Materials, Vol.10, No.12, pp. 3629-3657, 2022, DOI:10.32604/jrm.2022.022624 - 14 July 2022

Abstract In light of the increasing demand for sustainable building materials, the effectiveness of bamboo utilization in various fields has become the object of scientists’ close attention. The increased interest in bamboo is explained by its sustainable characteristics, which make it the most preferred material for environmentally friendly and costeffective construction compared to conventional ones. Applicability of bamboo is vast and diverse: from decoration and furniture to structural members and reinforcement. Due to the low price, rich resources, and high elasticity, bamboo culms have also been used as an alternative to steel reinforcement in concrete structures. More >

Mahdi Hosseini^1,2,*, Bingyu Jian^1,2, Haitao Li^1,2,*, Dong Yang^1,2, Ziang Wang^1,2, Zixian Feng^1,2, Feng Shen³, Jian Zhang⁴, Rodolfo Lorenzo⁵, Ileana Corbi⁶, Ottavia Corbi⁶

Journal of Renewable Materials, Vol.10, No.12, pp. 3243-3262, 2022, DOI:10.32604/jrm.2022.022171 - 14 July 2022

Abstract The use of fibre-reinforced polymer (FRP) to confine concrete columns improves the strength and ductility of the columns by reducing passive lateral confinement pressure. Many numerical and analytical formulations have been proposed in the literature to describe the compressive behaviour of FRP confined concrete under both monotonic and cyclic loads. However, the effect of a stress/strain level in the columns has not been well defined because of the lack of well-defined strategies of modelling and oversimplification of the model. This paper reviews the existing FRP combinations and the available numerical and analytical methods to determine More >

Xiumei Zhong¹, Yuxin Liang^1,2,*, Qian Wang^1,*, Jinlian Ma¹, Shouyun Liang², Yan Wang¹, Xiaowei Xu¹

Journal of Renewable Materials, Vol.10, No.12, pp. 3405-3424, 2022, DOI:10.32604/jrm.2022.021120 - 14 July 2022

Abstract The road subgrade and road surface in collapsible loess area are prone to many engineering diseases such as uneven subgrade settlement, insufficient bearing capacity of soaked foundation, collapse and instability of subgrade side slope due to the special properties of loess. As an environment-friendly, low-cost soil modifier with good adhesion and chelation properties, lignin has been considered to be used in highway subgrade construction. In order to explore the effect of lignin on loess, the compressive and collapsible properties of modified loess with different lignin contents were analyzed based on consolidation compression test. The improvement More >

Yangyang Hao, Yue Liu^*, Guorui Cao^*

Journal of Renewable Materials, Vol.10, No.12, pp. 3505-3519, 2022, DOI:10.32604/jrm.2022.023122 - 14 July 2022

Abstract Aiming to reduce the defects of perovskite film and improve carrier transport, an organic small molecule, benzo [d]isothiazol-3(2H)-one 1,1-dioxide (OBS), is introduced as an additive in the solution-processing of perovskite and prepare uniform perovskite films with a continuous distribution of OBS at grain boundaries. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy are conducted to reveal the interactions of hydrogen bonding and coordination bonding between OBS and perovskite. Various characterizations (including X-ray diffraction, UV-vis spectroscopy, electrochemical impedance spectroscopy, etc.) are conducted to uncover the effect of OBS on device performance. Consequently, high efficiency of 23.26% More > Graphic Abstract

Daguan Huang^1,*, Ditao Niu², Li Su^3,*, Hao Zheng², Qiang Fu², Yunhe Liu¹

Journal of Renewable Materials, Vol.10, No.12, pp. 3477-3489, 2022, DOI:10.32604/jrm.2022.021282 - 14 July 2022

Abstract Coral materials can replace concrete aggregates and achieve material self-sufficiency for reducing the construction costs of island projects. This paper studies the effects of different mineral admixtures on the properties of coral aggregate concrete (CAC). The chloride concentration of CAC after different erosion times is measured using the potentiometric method, and the porosity of the CAC is calculated using thermogravimetric and drying methods. The chloride concentration of the CAC presents a two-phases distribution. The peak chloride concentration followed a power function, increasing with the erosion time. The chloride diffusion coefficient of CAC is 7.9%– 37.5% More >

Zhiguang Yang^1,*, Gaojun Yan^1,2, Xueping Liu¹, Zhengyuan Feng¹, Xinfeng Zhu¹, Yanli Mao¹, Songtao Chen¹, Zhisheng Yu², Ruimei Fan³, Linlin Shan^3,*

Journal of Renewable Materials, Vol.10, No.12, pp. 3573-3585, 2022, DOI:10.32604/jrm.2022.022031 - 14 July 2022

Abstract Adsorption can be used to recover effectively the volatile organic gases (VOCs) in the exhaust gas from factories through using an appropriate adsorption bed. Due to form a physical or chemical bond, adsorption occurs between the porous solid medium and the liquid or gas multi-component fluid mixture. The regeneration capacity of the adsorbent is as important as the adsorption capacity and it determines the economics of the adsorption system. The regeneration of adsorbent can be realized through changing the pressure or temperature of the system. Here, activated carbon samples from coconut shell were prepared and… More > Graphic Abstract

Shun Kang¹, Xun Yuan¹, Changwu Liu^1,*, Yulin Chen¹, Xianliang Zhou¹, Haikuan Wu², Zhiguo Ma³

Journal of Renewable Materials, Vol.10, No.12, pp. 3521-3538, 2022, DOI:10.32604/jrm.2022.021694 - 14 July 2022

Abstract Part of the tunnel spoil can not be used for concrete due to alkali-aggregate reaction (AAR). Water is an indispensable condition for AAR, so separating the alkali-aggregate from water is of great benefit to controlling the AAR. This paper investigates the modification of concrete and aggregate by hydrophobic impregnation and organic coating and then evaluates their waterproof and mechanical properties by dynamic contact angle (DCA), ultrasonic wave velocity, scanning electron microscope (SEM), nuclear magnetic resonance (NMR), and so on. For waterproofness, hydrophobic impregnation and organic coating can both improve the waterproofness of concrete and aggregate.… More >

Jiamao Li^1,2,*, Chuimin Zhang¹, Lin Li¹, Chuangang Fan^1,*, Zhaofang He³, Yuandi Qian³

Journal of Renewable Materials, Vol.10, No.12, pp. 3439-3458, 2022, DOI:10.32604/jrm.2022.021214 - 14 July 2022

Abstract The purpose of this paper was to explore the possibility of using low-alkalinity cementitious materials as binders, in which ground blast furnace slag and fly ash acted as a partial replacement of ordinary Portland cement, and CaSO₄, Na₂SO₄, and CaO were used as a sulfate activator and alkali-activated additives, to solidify gold mine tailings for preparation of a green, inexpensive cemented paste backfill (CPB). For this target, the effects of cement/ tailings ratio, superplasticizer dosage, solid content, tailings fineness on the mechanical properties of the CPB were investigated. Additionally, the hydration mechanism of the CPB was… More >

Xin Wan^1,2,#, Zhigang Xia^3,4,#, Xiaoli Yang^1,2, Chengfeng Zhou², Yuanming Zhang^1,2, Haoxi Ben^1,2, Guangting Han^1,2, Wei Jiang^1,2,*

Journal of Renewable Materials, Vol.10, No.12, pp. 3391-3404, 2022, DOI:10.32604/jrm.2022.021102 - 14 July 2022

Abstract The toxic dyestuffs from printing and dyeing wastewater have caused serious damages to the ecological environment, thus exploring effective methods to remove them having become a key topic. Here, a series of biochar samples were synthesized form kenaf to adsorb methylene blue (MB), which was acted as the dye representative for the test of adsorption capacity due to the presence of abundant double bond and aromatic heterocyclic ring. By tuning the raw materials and pyrolysis temperature, a super adsorption capacity about 164.21 mg·g^–1 was obtained over the biochar that pyrolyzed at 700°C with the kenaf fiber… More >

Rui Wang, Lanlan Shi, Yurong Wang^*

Journal of Renewable Materials, Vol.10, No.12, pp. 3285-3302, 2022, DOI:10.32604/jrm.2022.020546 - 14 July 2022

Abstract Air-dry density, modulus of rupture (MOR), modulus of elasticity (MOE), compressive strength parallel to grain, and hardness of Catalpa bungei clones were investigated in this study with feasibility of predicting these properties by near-infrared (NIR) spectroscopy. The best candidate ‘Luoqiu 3’ has been selected from three clones based on wood physical and mechanical property indices. Lower values of wood physical and mechanical properties have been found in the corewood compared to the outerwood. There were significant positive correlations between the air-dry density and mechanical properties. Information from cross section for air-dry density, compressive strength parallel to More >