Minkyung Lee¹, Jin Kwak^2,*

CMC-Computers, Materials & Continua, Vol.67, No.1, pp. 349-367, 2021, DOI:10.32604/cmc.2021.014700

Abstract Side-channel attacks have recently progressed into software-induced attacks. In particular, a rowhammer attack, which exploits the characteristics of dynamic random access memory (DRAM), can quickly and continuously access the cells as the cell density of DRAM increases, thereby generating a disturbance error affecting the neighboring cells, resulting in bit flips. Although a rowhammer attack is a highly sophisticated attack in which disturbance errors are deliberately generated into data bits, it has been reported that it can be exploited on various platforms such as mobile devices, web browsers, and virtual machines. Furthermore, there have been studies on bypassing the defense measures… More >

Yingfu Cai¹, Sultan Noman Qasem^2,3, Harish Garg⁴, Hamïd Parvïn^5,6,7,*, Kim-Hung Pho⁸, Zulkefli Mansor⁹

CMC-Computers, Materials & Continua, Vol.67, No.1, pp. 1225-1239, 2021, DOI:10.32604/cmc.2021.014699

Abstract An invariant can be described as an essential relationship between program variables. The invariants are very useful in software checking and verification. The tools that are used to detect invariants are invariant detectors. There are two types of invariant detectors: dynamic invariant detectors and static invariant detectors. Daikon software is an available computer program that implements a special case of a dynamic invariant detection algorithm. Daikon proposes a dynamic invariant detection algorithm based on several runs of the tested program; then, it gathers the values of its variables, and finally, it detects relationships between the variables based on a simple… More >

Xiaoying Zhuang^2,3, Hung Nguyen-Xuan^4,5, Shuai Zhou^1,*

CMC-Computers, Materials & Continua, Vol.67, No.1, pp. 577-593, 2021, DOI:10.32604/cmc.2021.014688

Abstract The microcapsule-contained self-healing materials are appealing since they can heal the cracks automatically and be effective for a long time. Although many experiments have been carried out, the influence of the size of microcapsules on the self-healing effect is still not well investigated. This study uses the two-dimensional discrete element method (DEM) to investigate the interaction between one microcapsule and one microcrack. The influence of the size of microcapsules is considered. The potential healing time and the influence of the initial damage are studied. The results indicate that the coalescence crack is affected by the size of holes. The elastic… More >

Durr-e-Nayab^1,*, Mohammad Haseeb Zafar^1,2, Mohammed Basheri²

CMC-Computers, Materials & Continua, Vol.67, No.1, pp. 1137-1152, 2021, DOI:10.32604/cmc.2021.014687

Abstract Routing protocols in Mobile Ad Hoc Networks (MANETs) operate with Expanding Ring Search (ERS) mechanism to avoid flooding in the network while tracing step. ERS mechanism searches the network with discerning Time to Live (TTL) values described by respective routing protocol that save both energy and time. This work exploits the relation between the TTL value of a packet, traffic on a node and ERS mechanism for routing in MANETs and achieves an Adaptive ERS based Per Hop Behavior (AERSPHB) rendition of requests handling. Each search request is classified based on ERS attributes and then processed for routing while monitoring… More >

Muhammad Hasnain¹, Seung Ryul Jeong^2,*, Muhammad Fermi Pasha¹, Imran Ghani³

CMC-Computers, Materials & Continua, Vol.67, No.1, pp. 1051-1068, 2021, DOI:10.32604/cmc.2021.014686

Abstract Regression testing is a widely studied research area, with the aim of meeting the quality challenges of software systems. To achieve a software system of good quality, we face high consumption of resources during testing. To overcome this challenge, test case prioritization (TCP) as a sub-type of regression testing is continuously investigated to achieve the testing objectives. This study provides an insight into proposing the ontology-based TCP (OTCP) approach, aimed at reducing the consumption of resources for the quality improvement and maintenance of software systems. The proposed approach uses software metrics to examine the behavior of classes of software systems.… More >

Muhammad Ashfaq Khan, Yangwoo Kim^*

CMC-Computers, Materials & Continua, Vol.67, No.1, pp. 427-443, 2021, DOI:10.32604/cmc.2021.014682

Abstract Many approaches have been tried for the classification of arrhythmia. Due to the dynamic nature of electrocardiogram (ECG) signals, it is challenging to use traditional handcrafted techniques, making a machine learning (ML) implementation attractive. Competent monitoring of cardiac arrhythmia patients can save lives. Cardiac arrhythmia prediction and classification has improved significantly during the last few years. Arrhythmias are a group of conditions in which the electrical activity of the heart is abnormal, either faster or slower than normal. It is the most frequent cause of death for both men and women every year in the world. This paper presents a… More >

Wasim Ullah Khan^1,*, Yigang He¹, Muhammad Asif Zahoor Raja², Naveed Ishtiaq Chaudhary³, Zeshan Aslam Khan³, Syed Muslim Shah⁴

CMC-Computers, Materials & Continua, Vol.67, No.1, pp. 815-834, 2021, DOI:10.32604/cmc.2021.014674

Abstract Abstract In this paper, a novel design of the flower pollination algorithm is presented for model identification problems in nonlinear active noise control systems. The recently introduced flower pollination based heuristics is implemented to minimize the mean squared error based merit/cost function representing the scenarios of active noise control system with linear/nonlinear and primary/secondary paths based on the sinusoidal signal, random and complex random signals as noise interferences. The flower pollination heuristics based active noise controllers are formulated through exploitation of nonlinear filtering with Volterra series. The comparative study on statistical observations in terms of accuracy, convergence and complexity measures… More >

Abdulfattah Noorwali¹, Muhammad Awais Javed², Mohammad Zubair Khan^3,*

CMC-Computers, Materials & Continua, Vol.67, No.1, pp. 463-476, 2021, DOI:10.32604/cmc.2021.014668

Abstract Unmanned Ariel Vehicles (UAVs) are flying objects whose trajectory can be remotely controlled. UAVs have lot of potential applications in the areas of wireless communications, internet of things, security, traffic management, monitoring, and smart surveying. By enabling reliable communication between UAVs and ground nodes, emergency notifications can be efficiently and quickly disseminated to a wider area. UAVs can gather data from remote areas, industrial units, and emergency scenarios without human involvement. UAVs can support ubiquitous connectivity, green communications, and intelligent wireless resource management. To efficiently use UAVs for all these applications, important challenges need to be investigated. In this paper,… More >

Himanshi Babbar¹, Shalli Rani^1,*, Mehedi Masud², Sahil Verma³, Divya Anand⁴, Nz Jhanjhi⁵

CMC-Computers, Materials & Continua, Vol.67, No.1, pp. 1301-1316, 2021, DOI:10.32604/cmc.2021.014627

Abstract In Software-Defined Networks (SDN), the divergence of the control interface from the data plane provides a unique platform to develop a programmable and flexible network. A single controller, due to heavy load traffic triggered by different intelligent devices can not handle due to it’s restricted capability. To manage this, it is necessary to implement multiple controllers on the control plane to achieve quality network performance and robustness. The flow of data through the multiple controllers also varies, resulting in an unequal distribution of load between different controllers. One major drawback of the multiple controllers is their constant configuration of the… More >

Tahani A. Abushal¹, Amal S. Hassan², Ahmed R. El-Saeed³, Said G. Nassr^4,*

CMC-Computers, Materials & Continua, Vol.67, No.1, pp. 991-1011, 2021, DOI:10.32604/cmc.2021.014620

Abstract We introduce a new two-parameter model related to the inverted Topp–Leone distribution called the power inverted Topp–Leone (PITL) distribution. Major properties of the PITL distribution are stated; including; quantile measures, moments, moment generating function, probability weighted moments, Bonferroni and Lorenz curve, stochastic ordering, incomplete moments, residual life function, and entropy measure. Acceptance sampling plans are developed for the PITL distribution, when the life test is truncated at a pre-specified time. The truncation time is assumed to be the median lifetime of the PITL distribution with pre-specified factors. The minimum sample size necessary to ensure the specified life test is obtained… More >