Home / Advanced Search

  • Title/Keywords

  • Author/Affliations

  • Journal

  • Article Type

  • Start Year

  • End Year

Update SearchingClear
  • Articles
  • Online
Search Results (2,944)
  • Open Access

    ARTICLE

    Design and Analysis of a Small Sewage Source Heat Pump Triple Supply System

    Chunxue Gao1,*, Yu Hao1, Qiuxin Liu1,2

    Energy Engineering, Vol., , DOI:10.32604/EE.2021.014703

    Abstract Based on the characteristics of sewage from beauty salons, a simulation model of a small sewage source heat pump triple supply system that can be applied to such places is established to optimize the operating conditions of the system. The results show that with the increase of sewage temperature and flow, the performance of the system also increases. In summer conditions, the system provides cooling, recovers waste heat and condensed heat from sewage, with a COP value of 8.97; in winter conditions, the system heats and produces hot water, with a COP value of 2.44; in transitional seasons, only hot… More >

  • Open Access

    ARTICLE

    Organosolv Lignin for Non-Isocyanate Based Polyurethanes (NIPU) as Wood Adhesive

    Jaša Saražin1, Antonio Pizzi2, Siham Amirou2, Detlef Schmiedl3, Milan Šernek1,*

    Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2021.015047

    Abstract A non-isocyanate-based polyurethane (NIPU) wood adhesive was produced from organosolv lignin, which is a bio-sourced raw material, available in large quantities and produced as a by-product of the paper industry. The formulation of this new lignin-based NIPU adhesive, which is presented, was chemically characterised by Matrix-Assisted Laser Desorption Ionization Time of Flight (MALDI ToF) mass spectrometry and by Fourier Transform Infra-Red (FTIR) spectrometry analyses. The oligomers formed were determined and showed that the three species involved in the NIPU adhesive preparation were formed by the co-reaction of the three reagents used: lignin, dimethyl carbonate, and hexamethylene diamine. Linear and branched… More >

  • Open Access

    ARTICLE

    Study of Spectral Response Characteristics of Oilseed Rape (Brassica napus) to Particulate Matters Based on Hyper-Spectral Technique

    Lijuan Kong1,2, Haiye Yu1,2, Zhaojia Piao1,2, Meichen Chen1,2, Jingmin Dang1, Lei Zhang1,2, Yuanyuan Sui1,2,*

    Phyton-International Journal of Experimental Botany, Vol., , DOI:10.32604/phyton.2021.014190

    Abstract Haze is mainly caused by the suspended particulate matters in the air, of which the particulate matters pollution harms leaf vegetables. In this paper, oilseed rapes at four different growing periods were investigated in a simulated particulate pollution environment. In combination of hyper-spectral technology and micro examination, the response of hyper-spectral characteristics of the leaf to particulate matters was investigated in-depth. The hyperspectral, chlorophyll content, net photosynthetic rate and stomatal conductance of leaf were obtained. The deposition and adsorption of particulate matters on the leaf were observed by Environmental Scanning Electron Microscope (ESEM). Normalized difference vegetation index (NDVI), modified red… More >

  • Open Access

    ARTICLE

    An Efficient Plant Regeneration System of Hydrangea bretschneideri Dipp via Stem Segments as Explants

    Si ran Wang#, Jia Yan#, Bu er Ha, Yu’e Bai*

    Phyton-International Journal of Experimental Botany, Vol., , DOI:10.32604/phyton.2021.013693

    Abstract Hydrangea bretschneideri Dipp is a highly popular ornamental plant for garden decoration. Genetic engineering technology has been successfully used in many plant species, but it is limited in Hydrangea. Here we established an efficient regeneration system by using stem segments as explants for the first time. In our study, the plant growth regulators (PGRs) were evaluated at the different regeneration processes, including axillary shoots regeneration and root induction. We found that the optimal concentration for axillary buds’ induction was 2.0 mgL−1 6-BA and 0.5 mgL−1 1 IAA, its highest induction rate was 70%. Moreover, the highest axillary shoots proliferation coefficient… More >

  • Open Access

    ARTICLE

    Ameliorative Role of Pre-Sowing Proline Treatment in Coriandrum sativum L. Seedlings under Mercury Toxicity

    Dhriti Kapoor1, Kapani Kavani1, Amandeep Rattan2, Marco Landi3,*, Anket Sharma4,*

    Phyton-International Journal of Experimental Botany, Vol., , DOI:10.32604/phyton.2021.012359

    Abstract Heavy metal toxicity is one of the major ecosystem concerns globally in present time and is also responsible for significant threat to agronomic crops. The current work was conducted to investigate the possible ameliorative role of proline in Coriandrum sativum L. seedlings treated with mercury (Hg). The seedlings were exposed to different concentrations of Hg (0, 0.1, 0.3 and 0.5 mM) for 20 days. The effects of pre-sowing treatment with proline were studied on C. sativum seedlings in terms of pigment (chlorophylls, carotenoids and anthocyanins), malondialdehyde (MDA), antioxidant compound (glutathione, total phenolic compounds, ascorbic acid) and osmolytes (proline, glycine betaine).… More >

  • Open Access

    ARTICLE

    Failure Patterns and Mechanisms of Hydraulic Fracture Propagation Behavior in the Presence of Naturally Cemented Fractures

    Daobing Wang1, Fang Shi2,*, Hao Qin1,*, Dongliang Sun1, Bo Yu1

    CMES-Computer Modeling in Engineering & Sciences, Vol., , DOI:10.32604/cmes.2021.014206

    Abstract In this study, we use the extended finite element method (XFEM) with a consideration of junction enrichment functions to investigate the mechanics of hydraulic fractures related to naturally cemented fractures. In the proposed numerical model, the lubrication equation is adopted to describe the fluid flow within fractures. The fluid-solid coupling systems of the hydraulic fracturing problem are solved using the Newton-Raphson method. The energy release rate criterion is used to determine the cross/arrest behavior between a hydraulic fracture (HF) and a cemented natural fracture (NF). The failure patterns and mechanisms of crack propagation at the intersection of natural fractures are… More >

  • Open Access

    ARTICLE

    A Combined Approach of Principal Component Analysis and Support Vector Machine for Early Development Phase Modeling of Ohrid Trout (Salmo Letnica)

    Sunil Kr. Jha1,*, Ivan Uzunov2, Xiaorui Zhang1

    CMES-Computer Modeling in Engineering & Sciences, Vol., , DOI:10.32604/cmes.2021.011821

    Abstract Ohrid trout (Salamo letnica) is an endemic species of fish found in Lake Ohrid in the Former Yugoslav Republic of Macedonia (FYROM). The growth of Ohrid trout was examined in a controlled environment for a certain period, thereafter released into the lake to grow their natural population. The external features of the fish were measured regularly during the cultivation period in the laboratory to monitor their growth. The data mining methods-based computational model can be used for fast, accurate, reliable, automatic, and improved growth monitoring procedures and classification of Ohrid trout. With this motivation, a combined approach of principal component… More >

  • Open Access

    ARTICLE

    The Micro-Scale Mechanism of Metal Mine Tailings Thickening Concentration Improved by Shearing in Gravity Thickener

    Huazhe Jiao1,2, Yachuang Wu1, Wei Wang2,*, Xinming Chen1, Yunfei Wang1, Juanhong Liu3, Wentao Feng4

    Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2021.014310

    Abstract Higher concentration is beneficial for the Paste and Thickened Tailings (PTT) operation in metal mine. Partial paste thickeners are produced lower density underflow. Flocculated tailings are intended to form a water entrapped network structure in thickener, which is detrimental to underflow concentration. In this study, the continuous thickening experiment was carried out for ultra-fine tungsten tailings to study the influence of rake shearing on underflow. The micro pores structure and seepage flow in tailings bed before and after shearing are studied by CT and simulation approach to reveal the shearing enhancement mechanism of thickening process. The results shown that, the… More >

  • Open Access

    ARTICLE

    Test and Analysis of the Sound Insulation Performance of Four Types of Timber Structure Floors under Jumping Excitation

    Yujie Huang1, Hao Zhu2, Dauletbek Assima4, Zheng Wang1,*, Minmin Li3, Xinyue Zhao1

    Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2021.014610

    Abstract To improve the impact sound insulation performance of building floors and meet the objective requirements for living comfort of residents, in this article, three kinds of elastic cushion materials, Portuguese cork board, BGL insulation sound insulation foam board, and EPP polypropylene plastic foam board, are applied to the sound insulation of a light frame wood floor structure of the same bedroom and compared to the ordinary floor. This study uses the transfer function method and transient excitation method to measure the sound insulation, damping ratio, and elastic modulus of materials, as well as the sound insulation of the floor under… More >

  • Open Access

    ARTICLE

    Advances in the Structural Composition of Biomass: Fundamental and Bioenergy Applications

    Neha Srivastava1,*, Akshay Shrivastav2, Rajeev Singh3, Mohammed Abohashrh4, K. R. Srivastava1, Safia Irfan5, Manish Srivastava1, P. K. Mishra1, Vijai Kumar Gupta6, Vijay Kumar Thakur6,*

    Journal of Renewable Materials, Vol., , DOI:10.32604/jrm.2021.014374

    Abstract Increased environmental pollution due to the organic wastes over the world is one of the most burning issues. These organic wastes lie under the category of biodegradable waste and can be effectively degraded from their complex compound into simple one by the action of microbes or other living organisms. Moreover, lignocellulosic biomass is a major part of the biodegradable waste and belongs to the group of renewable energy source, which can be very effective for bioenergy production. Biomasses are made up of different compounds such as cellulose, hemicelluloses, lignin and protein. Apart from these components, based on the structural analysis… More >

Displaying 2661-2670 on page 267 of 2944. Per Page