Qian Wang^1,#,*, Zhaozhao Liu^1,2,#,*, Xiumei Zhong¹, Zhongnan Gao¹, Fuqiang Liu²

Journal of Renewable Materials, Vol.9, No.3, pp. 523-540, 2021, DOI:10.32604/jrm.2021.014114

Abstract To effectively improve the poor engineering properties of loess and enhance its seismic performance, the industrial by-product lignin is used as a modified material. Based on lots of dynamic triaxial tests, the dynamic elastic modulus and damping ratio of lignin-modified loess were tested. The effects of lignin content on the dynamic elastic modulus and damping ratio of lignin-modified loess were analyzed. Combined with scanning electron microscopy (SEM) and X-ray diffraction (XRD), the microscopic mechanism of lignin to improve the dynamic properties of loess was studied. The results show that lignin can effectively modify the dynamic deformation of loess under dynamic… More >

Xuying Guo^1,2,*, Saiou Fu¹, Junzhen Di³, Yanrong Dong³, Guoliang Jiang³

Journal of Renewable Materials, Vol.9, No.3, pp. 541-555, 2021, DOI:10.32604/jrm.2021.012335

Abstract The high concentrations of Fe²⁺ and Mn²⁺ in acid mine drainage make it difficult and expensive to treat. It is urgent that we find a cheap and efficient adsorption material to treat Fe²⁺ and Mn²⁺. As a solid waste in mining areas, coal gangue occupies a large area and pollutes the surrounding environment during the stacking process. Developing a method of resource utilization is thus a research hotspot. In this study, we modified spontaneous combustion gangue using NaOH, NaCl, and HCl by chemically modifying the minerals. We determined the optimal conditions for treating Fe²⁺ and Mn²⁺ in acid mine drainage… More >

Achille Gnassiri Wedaïna^1,2, Antonio Pizzi², Wolfgang Nzie¹, Raidandi Danwe³, Noel Konaï^4,*, Siham Amirou², Cesar Segovia⁵, Raphaël Kueny⁵

Journal of Renewable Materials, Vol.9, No.3, pp. 477-493, 2021, DOI:10.32604/jrm.2021.012782

Abstract The Piptadeniastrum Africanum bark tannin extract was characterized using MALDI TOF, ATR-FT MIR. It was used in the development of a resin with Vachellia nilotica extract as a biohardener. This tannin is consisting of Catechin, Quercetin, Chalcone, Gallocatechin, Epigallocatechin gallate, Epicatechin gallate. The gel time of the resin at natural pH (pH = 5.4) is 660 s and its MOE obtained by thermomechanical analysis is 3909 MPa. The tenacity of Urena lobata fibers were tested, woven into unidirectional mats (UD), and used as reinforcement in the development of biocomposite. The fibers tenacity at 20, 30 and 50 mm lengths are… More >

Medjda Amari¹, Kamel Khimeche^1,*, Abdelkader Hima² , Redouane Chebout³, Abderahmane Mezroua¹

Journal of Renewable Materials, Vol.9, No.3, pp. 463-475, 2021, DOI:10.32604/jrm.2021.013680

Abstract Recently, the exploitation of renewable plant resources in the formulation of adhesives is very promising for their availability at low coast, as well as their richness in biomolecules such as polyphenols. In this way, many research studies tannins extracted from different sources such as mimosa, quebracho, and pine have been the subject of very satisfactory recent studies. In this paper, a new complete characterization of the tannins extracted from the bark of eucalyptus globulus harvested from two regions in Algeria was achieved. The structural characterization enabled us to confirm the richness in condensed tannins, particularly in procyanidin and prodelphinidin units.… More >

Resa Martha^1,2, Mahdi Mubarok^1,2, Wayan Darmawan², Wasrin Syafii², Stéphane Dumarcay¹, Christine Gérardin Charbonnier¹, Philippe Gérardin^1,*

Journal of Renewable Materials, Vol.9, No.3, pp. 399-449, 2021, DOI:10.32604/jrm.2021.014286

Abstract As a tropical archipelagic country, Indonesia’s forests possess high biodiversity, including its wide variety of wood species. Valorisation of biomolecules released from woody plant extracts has been gaining attractive interests since in the middle of 20th century. This paper focuses on a literature review of the potential valorisation of biomolecules released from twenty wood species exploited in Indonesia. It has revealed that depending on the natural origin of the wood species studied and harmonized with the ethnobotanical and ethnomedicinal knowledge, the extractives derived from the woody plants have given valuable heritages in the fields of medicines and pharmacology. The families… More >

Boheng Zhu¹, Huaxin Liu^1,*, Genjin Liu², Abasal Hussain², Xiaofei Zhang³, Xuezhi Wang¹

Journal of Renewable Materials, Vol.9, No.3, pp. 507-521, 2021, DOI:10.32604/jrm.2021.013580

Abstract The aim of this study is to improve the bond performance of basalt fiber reinforced polymer (BFRP) bars and recycled aggregate concrete (RAC) after being exposed to high temperatures. The bond behavior (failure modes, bond strength, bond stress-slip curves) between BFRP bars and hybrid fiber recycled aggregate concrete (HFRAC) after being exposed to temperatures ranging from 20°C up to 500°C was studied by using pull-out tests. The effect of high temperatures on mechanical properties of concrete (compressive strength, splitting tensile strength) and tensile strength of BFRP bars was also investigated. The bond strength decreased as the temperature increased and the… More >

Chanita Mano, Atthakorn Thongtha^*

Journal of Renewable Materials, Vol.9, No.3, pp. 495-506, 2021, DOI:10.32604/jrm.2021.013201

Abstract This work focused on characterizing and improving the thermal behavior of metal sheet roofing. To decrease the heat transfer from the roof into a building, we investigated the efficiency of four types of phase change materials, with different melting points: PCM І, PCM II, PCM III and PCM IV, when used in conjunction with a sheet metal roof. The exterior metal roofing surface temperature was held constant at 50°C, 60°C, 70°C and 80°C, using a thermal source (halogen lights) for 360 min to investigate and compare the thermal performance of the metal sheet roofing with and without phase change materials… More >

Khawla Essassi^1,2,*, Jean-Luc Rebiere¹, Abderrahim El Mahi¹, Mohamed Amine Ben Souf², Anas Bouguecha², Mohamed Haddar²

Journal of Renewable Materials, Vol.9, No.3, pp. 569-584, 2021, DOI:10.32604/jrm.2021.012253

Abstract Meta-sandwich composites with three-dimensional (3D) printed architecture structure are characterized by their high ability to absorb energy. In this paper, static and fatigue 3-point bending tests are implemented on a 3D printed sandwich composites with a re-entrant honeycomb core. The skins, core and whole sandwich are manufactured using the same bio-based material which is polylactic acid with flax fiber reinforcement. Experimental tests are performed in order to evaluate the durability and the ability of this material to dissipate energy. First, static tests are conducted to study the bending behaviour of the sandwich beams, as well as to determine the failure… More >

Omar A. Saraereh^*

CMC-Computers, Materials & Continua, Vol.67, No.1, pp. 1121-1136, 2021, DOI:10.32604/cmc.2021.015066

Abstract Wireless communication is one of the rapidly-growing fields of the communication industry. This continuous growth motivates the antenna community to design new radiating structures to meet the needs of the market. The 5G wireless communication has received a lot of attention from both academia and industry and significant efforts have been made to improve different aspects, such as data rate, latency, mobility, reliability and QoS. Antenna design has received renewed attention in the last decade due to its potential applications in 5G, IoT, mmWave, and massive MIMO. This paper proposes a novel design of broadband antenna for 5G mmWave and… More >

Hanan Abdullah Mengash^1,*, Hanan A. Hosni Mahmoud^1,2

CMC-Computers, Materials & Continua, Vol.67, No.1, pp. 1013-1032, 2021, DOI:10.32604/cmc.2021.014942

Abstract Strabismus is a medical condition that is defined as the lack of coordination between the eyes. When Strabismus is detected at an early age, the chances of curing it are higher. The methods used to detect strabismus and measure its degree of deviation are complex and time-consuming, and they always require the presence of a physician. In this paper, we present a method of detecting strabismus and measuring its degree of deviation using videos of the patient’s eye region under a cover test. Our method involves extracting features from a set of training videos (training corpora) and using them to… More >