Dongling Yu¹, Zuoxiang Zhu¹, Jiangen Zhou¹, Dahai Liao^1,*, Nanxing Wu^1,2,*

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.2, pp. 487-500, 2021, DOI:10.32604/fdmp.2021.014712

Abstract In order to control the accumulation of SiC ceramic particles on the wall of the rotating chamber in the frame of a dry granulation process, the effect of the wall reverse speed on the mixing process is investigated. In particular, an Euler-Euler two-phase flow model is used to analyze the dynamics of both SiC particles and air. The numerical results show that by setting a certain reverse rotating speed of the rotating chamber, the accumulation of SiC particles on the wall can be improved, i.e., their direction of motion in proximity to the wall can be changed and particles can… More >

Yin Wang^1,*, Lingling Wang², Yong Ji¹, Zhicheng Xi¹, Wenwen Zhang¹

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.2, pp. 471-485, 2021, DOI:10.32604/fdmp.2021.014652

Abstract A three dimensional (3D) numerical wave flume is used to investigate carefully the ISWs (Internal solitary wave) forces acting on cylinders interacting with a stratified shear environment. Using the Large-Eddy Simulation (LES) approach and analyzing the distribution of shear stress and pressure along the surface of the cylinder, the differential pressure resistance and the viscous force are obtained. The method of multiple linear regression analysis is adopted and a comprehensive influence coefficient is determined accordingly to account for the dimensionless forces acting on the cylinder. Results show that the differential pressure resistance on a square cylinder is 1.5 times higher… More >

D. R. V. S. R. K. Sastry¹, Peri K. Kameswaran², Mohammad Hatami^3,*

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.2, pp. 285-300, 2021, DOI:10.32604/fdmp.2021.014429

Abstract The problem of Marangoni mixed convection in the presence of an inclined magnetic field with uniform strength in a nanofluid (formed by the dispersion of two metallic nanoparticles, i.e., Copper (Cu), and alumina (Al₂O₃) in water) is addressed numerically. The effects of viscous dissipation and Ohmic heating are also considered. The original set of governing partial differential equations is reduced to a set of non-linear coupled ordinary differential equations employing the similarity transformation technique. The simplified equations are numerically solved through MATLAB ‘bvp4c’ algorithm. The results are presented in terms of graphs for several parameters. It is found that enhancing… More >

Jinli Song¹, Nabil Kharoua^2,*, Lyes Khezzar¹, Mohamed Alshehhi¹

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.2, pp. 455-470, 2021, DOI:10.32604/fdmp.2021.014370

Abstract Turbulent swirling flow inside a short pipe interacting with a conical bluff body was simulated using the commercial CFD code Fluent. The geometry used is a simplified version of a novel liquid/gas separator used in multiphase flow metering. Three turbulence models, belonging to the Reynolds averaged Navier-Stokes (RANS) equations framework, are used. These are, RNG k-ε, SST k-ω and the full Reynolds stress model (RSM) in their steady and unsteady versions. Steady and unsteady RSM simulations show similar behavior. Compared to other turbulence models, they yield the best predictions of the mean velocity profiles though they exhibit some discrepancies in… More >

Pradeep Gurrala¹, Saravanan Balusamy¹, Sayak Banerjee¹, Kirti Chandra Sahu^2,*

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.2, pp. 253-284, 2021, DOI:10.32604/fdmp.2021.014126

Abstract The wetting and evaporation dynamics of sessile droplets have gained considerable attention over the last few years due to their relevance to many practical applications, ranging from a variety of industrial problems to several biological systems. Droplets made of binary mixtures typically undergo complex dynamics due to the differential volatility of the considered components and the ensuing presence of thermocapillary effects. For these reasons, many research groups have focused on the evaporation of binary droplets using a variegated set of experimental, numerical, and purely theoretical approaches. Apart from reviewing the state-of-the-art about the existing experimental, analytical, and computational techniques used… More >

Chenguang Guo^1,2,*, Yu Sun^1,2, Qiang Li¹, Haitao Yue¹, Chuang Wang¹

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.2, pp. 349-370, 2021, DOI:10.32604/fdmp.2021.013535

Abstract

To improve the agglomeration of powder in a coaxial powder feeding nozzle used in the frame of a laser energy deposition technique, the influence of several parameters must be carefully assessed. In the present study the problem is addressed by means of numerical simulations based on a DEM-CFD (Discrete Element Method and Discrete Element Method) coupled model. The influence of the powder flow concentration, powder flow focal length and the amount of powder at the nozzle outlet on the rate of convergence of the powder flow is considered. The role played by the nozzle outlet width, the angle between the… More >

Xiaokang Tian¹, Kai Yue^1,2,*, Yu You^1,2, Yongjian Niu¹, Xinxin Zhang^1,2

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.2, pp. 301-317, 2021, DOI:10.32604/fdmp.2021.013521

Abstract The heat transfer performances of a microchannel heat sink in the presence of a nanofluid can be affected by the attachment of nanoparticle (NP) on the microchannel wall. In this study, the mechanisms underlying NP transport and attachment are comprehensively analyzed by means of a coupled double-distribution-function lattice Boltzmann model combined with lattice-gas automata. Using this approach, the temperature distribution and the two-phase flow pattern are obtained for different values of the influential parameters. The results indicate that the number of attached NPs decrease exponentially as their diameter and the fluid velocity grow. An increase in the wall temperature leads… More >

R. Kalaivanan¹, N. Vishnu Ganesh², Qasem M. Al-Mdallal^3,*

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.2, pp. 319-332, 2021, DOI:10.32604/fdmp.2021.012789

Abstract The buoyancy driven flow of a second-grade nanofluid in the presence of a binary chemical reaction is analyzed in the context of a model based on the balance equations for mass, species concentration, momentum and energy. The elastic properties of the considered fluid are taken into account. The two-dimensional slip flow of such non-Newtonian fluid over a porous flat material which is stretched vertically upwards is considered. The role played by the activation energy is accounted for through an exponent form modified Arrhenius function added to the Buongiorno model for the nanofluid concentration. The effects of thermal radiation are also… More >

Zechen Yao¹, Renfeng Yang^1,*, Haichao An²

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.2, pp. 397-412, 2021, DOI:10.32604/fdmp.2021.012114

Abstract Computational fluid dynamics (CFD) has been used to analyze the mixing process of Asphalt and Rubber (AR) in a stirred tank with a six flat-blade disc turbine (Rushton), a down-pumping 45° pitched-blade turbine (PBTD-6) and a down-pumping propeller (TXL). The two-phase (solid-liquid) flow in the considered stirred tank has been modelled in the framework of an Eulerian-Eulerian approach, a laminar-flow assumption and a multi-reference frame strategy. The following effects have been investigated: The influence of the impeller speed, impeller type, crumb rubber (CR) particle diameter and initial CR particle loading on the quality of the CR particle’s suspension. The outcomes… More >

Sulardjaka Sulardjaka^1,*, Sri Nugroho¹, Norman Iskandar¹, Agus P. Adi¹, Deni F. Fitriyana²

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.2, pp. 385-395, 2021, DOI:10.32604/fdmp.2021.011784

Abstract Zeolite A has been successfully synthesized from geothermal waste with natrium aluminate and natrium silicate using conventional (C-H) and microwave heating (M-H) for the hydrothermal treatment. The products obtained for different aging times have been characterized using X-Ray Diffraction (XRD), Fourier transformation infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). It is shown that with the M-H process, zeolite can be formed at relatively low temperature (100°C) in a relatively short time (40 min). The crystallization of zeolite A has been found to be generally promoted by an increase of aging and synthesis time; however, it has also been observed… More >