JINFANG HU^1,#, JIANGEN AO^2,#, LONGSHENG FU^1,#, YAOQI WU¹, FENG SHAO³, TIANTIAN XU¹, MINGJIN JIANG⁴, SHAOFENG XIONG¹, YANNI LV^1,*

BIOCELL, Vol.47, No.7, pp. 1611-1622, 2023, DOI:10.32604/biocell.2023.028684

Abstract Background: The attenuation function of Dalbergia odorifera leaves on cerebral ischemia-reperfusion (I/R) is little known. The candidate targets for the Chinese herb were extracted from brain tissues through the high-affinity chromatography. The molecular mechanism of D. odorifera leaves on cerebral I/R was investigated. Methods: Serial affinity chromatography based on D. odorifera leaves extract (DLE) affinity matrices were applied to find specific binding proteins in the brain tissues implemented on C57BL/6 mice by intraluminal middle cerebral artery occlusion for 1 h and reperfusion for 24 h. Specific binding proteins were subjected to mass-spectrometry to search for the differentially expressed proteins between… More >

Yongbin Zhang^*

Frontiers in Heat and Mass Transfer, Vol.13, pp. 1-6, 2019, DOI:10.5098/hmt.13.27

Abstract A multiscale analysis is carried out for the pressure driven flow rate through a micro/nano slit pore when the adsorbed layer-fluid interfacial slippage is considered. The flow of the adsorbed layer on the channel wall is described by the flow factor approach model for nanoscale flow, and the flow of the continuum fluid intermediate between the two adsorbed layers is described by a continuum fluid model. The adsorbed layer-fluid interfacial slippage is considered, while the adsorbed layer-wall surface interfacial slippage is ignored. The weak, medium-level and strong fluid-wall interactions and the solid adsorbed layer assumption are respectively taken. It is… More >

Yongbin Zhang^*

Frontiers in Heat and Mass Transfer, Vol.13, pp. 1-4, 2019, DOI:10.5098/hmt.13.22

Abstract The power loss is calculated by a multiscale approach in the pressure driven mass transfer in a micro slit pore where there are the physical adsorbed layers respectively on the coupled walls and intermediate between them is a continuum fluid flow. The flow factor approach model for nanoscale flow is taken to simulate the flow of the adsorbed layer, and conventional hydrodynamic flow theory models the continuum fluid flow. The calculation shows that the adsorbed layer on the wall surface can have a very significant effect on the power loss in this multiscale mass transfer, and it can greatly reduce… More >

Ahmad A. A. Alkhatib^*, Adnan A. Hnaif, Thaer Sawalha

Computer Systems Science and Engineering, Vol.47, No.1, pp. 637-656, 2023, DOI:10.32604/csse.2023.037345

Abstract Large cities suffer from traffic congestion, particularly at intersections, due to a large number of vehicles, which leads to the loss of time by increasing carbon emissions, including fuel consumption. Therefore, the need for optimising the flow of vehicles at different intersections and reducing the waiting time is a critical challenge. Conventional traffic lights have been used to control traffic flow at different intersections and have been improved to become more efficient by using different algorithms, sensors and cameras. However, they also face some challenges, such as high-cost installation, operation, and maintenance issues. This paper develops a new system based… More >

Mohammed Altaf Ahmed¹, T. Satyanarayana Murthy², Fayadh Alenezi³, E. Laxmi Lydia⁴, Seifedine Kadry^5,6,7, Yena Kim⁸, Yunyoung Nam^8,*

Computer Systems Science and Engineering, Vol.47, No.1, pp. 1283-1297, 2023, DOI:10.32604/csse.2023.035786

Abstract Wireless Sensor Networks (WSN) play a vital role in several real-time applications ranging from military to civilian. Despite the benefits of WSN, energy efficiency becomes a major part of the challenging issue in WSN, which necessitate proper load balancing amongst the clusters and serves a wider monitoring region. The clustering technique for WSN has several benefits: lower delay, higher energy efficiency, and collision avoidance. But clustering protocol has several challenges. In a large-scale network, cluster-based protocols mainly adapt multi-hop routing to save energy, leading to hot spot problems. A hot spot problem becomes a problem where a cluster node nearer… More >

Yalin Li^1,*, Lei Liu¹, Wenbao Huang¹, Junpu Xie², Zhaoxia Song¹, Shuna Guo¹, Enci Wang¹

Journal of Renewable Materials, Vol.11, No.7, pp. 3001-3023, 2023, DOI:10.32604/jrm.2023.026604

Abstract To achieve optimal recovery and value-added utilisation of cellulose in peanut shells, the cellulose in peanut shells was first extracted using the sodium hydroxide-sodium chlorite method. Then, cellulose hydrogel was prepared by graft copolymerisation using N, N’-methylenebisacrylamide as the cross-linking agent, sodium persulfate as the initiator, and acrylic acid as the monomer. Orthogonal optimisation experiments were designed to obtain optimal process parameters for hydrogel preparation with the cellulose dosage of 0.40 g, initiator dosage of 0.20 g, polymerisation temperature of 70°C, cross-linking agent of 0.25 g, and monomer dosage of 3.0 mL. The effect of initiator dosage on hydrogel synthesis was… More > Graphic Abstract

Zhipeng Tang^a, Yongbin Zhang^b,*

Frontiers in Heat and Mass Transfer, Vol.14, pp. 1-5, 2020, DOI:10.5098/hmt.14.26

Abstract The critical flow rate through a micro/nano slit pore for starting the adsorbed layer-fluid or adsorbed layer-wall interfacial slippage is calculated by a multiscale scheme. There are the physical adsorbed layers on the channel walls and the intermediate continuum fluid which are respectively in noncontinuum and continuum flows. The flow factor approach model for nanoscale flow is used to simulate the adsorbed layer flow, and a continuum model describes the continuum fluid flow. The boundary between the adsorbed layer and the continuum fluid or the boundary between the adsorbed layer and the channel wall are treated as the interfacial slippage.… More >

Maryam Mirzaie^a,† , Ali Reza Talebizadeh^a , Hassan Hashemipour^a,b

Frontiers in Heat and Mass Transfer, Vol.14, pp. 1-7, 2020, DOI:10.5098/hmt.14.19

Abstract In this work, a combination of computational fluid dynamics (CFD) and porous media model was applied to simulate the benzene adsorption on activated carbon and the flow fields in a porous media. The three dimensional unsteady state the gas flow was modeled by using the laminar one phase flow equations in conjunction with the mass transfer equation. The adsorption rate on solid phase was implemented to the model by a user defined source. The model was validated by comparing the simulated breakthrough curves by experimental data. After the validation of the model, the effects of the operating conditions such as… More >

Chamseddine Zaki¹ , Mohamed Ayet^1,2, Allah Bilel Soussi²

Revue Internationale de Géomatique, Vol.29, No.3, pp. 255-262, 2019, DOI:10.3166/rig.2019.00086

Abstract A conceptual spatiotemporal data model must be able to offer users a semantic richness of expression to meet their diverse needs concerning the modeling of spatio-temporal data. The conceptual spatiotemporal data model must be able to represent the objects, relationships and events that can occur in a field of study, track data history, support the multirepresentation of these data, and represent temporal and spatial data with two and three dimensions features. The model must also allow the assignment of different types of constraints to relations and provide a complete orthogonality between dimensions and concepts. The MADS model meets several requirements… More >

Yazeed Al-Radhi^1,*, Farzad Hejazi², Azmi Abdulkarim³, Ali Feroozi⁴

Structural Durability & Health Monitoring, Vol.17, No.2, pp. 89-113, 2023, DOI:10.32604/sdhm.2023.011439

Abstract Offshore steel structures are a common investment in oil and gas industries operating in shallow to medium depth seas. These structures have become increasingly popular since the mid-19th century, with a typical design life of 30-50 years. Despite their popularity, the structural integrity of existing offshore structures remains a controversial topic. Environmental loads and material degradation have been identified as significant factors that can compromise the structural integrity of offshore structures. To address this issue, this study aims to investigate the reserved strength capacity of a selected offshore structure located in the Malaysian Seas. The study will explore the effect… More >