Dragomir Vassilev^1*, Nadezhda Petkova², Milena Koleva¹, Panteley Denev²

Journal of Renewable Materials, Vol.4, No.1, pp. 24-30, 2016, DOI:10.7569/JRM.2015.634125

Abstract This article presents the results obtained by the ultrasound-assisted synthesis of sucrose and fructooligosaccharides (FOS) esters with fatty acids (palmitic and 10-undecylenic), the identifi cation of the products and the study of their possible application as plasticizers in plastics processing. Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (¹H and ¹³C NMR) spectroscopy were used to identify the synthesized carbohydrate esters. The plasticizing effect of the sucrose palmitate applied in polyvinyl chloride (PVC) was evaluated by the glass transition temperatures; the decrease of the T_g with the increase of the ester content could be accepted as confi rmation of… More >

Szczepan Bednarz^*, Angelika Wesołowska, Magdalena Trątnowiecka, Dariusz Bogdał

Journal of Renewable Materials, Vol.4, No.1, pp. 18-23, 2016, DOI:10.7569/JRM.2015.634131

Abstract New methods of preparation of crosslinked polymers from itaconic acid as a renewable monomer have been explored. Synthesis of hydrogels and xerogels from the acid in deep eutectic solvents (DESs) are described and some basic properties of the materials are reported. Most importantly, a surfactant-free method of creation of macroporous poly(itaconic-co-bisacrylamide) by phase separation polymerization in binary mixture of the DES and poly(ethylene glycol) is demonstrated. More >

Monique de Alvarenga Pinto Cotrim^1*, Jessyca Aparecida Paes Dutra², Suzana Gonçalves Carvalho², Janaina Cecília Oliveira Villanova², Eliane Ayres¹

Journal of Renewable Materials, Vol.4, No.1, pp. 9-17, 2016, DOI:10.7569/JRM.2015.634122

Abstract In recent years there has been an increasing demand for the application of natural products to address problems in the environment. The use of products derived from renewable resources can provide a sustainable strategy to replace totally or partially synthetic products. Cymbopogon, commonly known as lemongrass, is a tropical grass cultivated mostly for its essential oil, which has demonstrated several bioactivities, including antibacterial and antifungal properties. In the present work the formation of inclusion complex between β-cyclodextrin (β-CD) and lemongrass essential oil (LGEO) as well as its fi xation onto cotton fabric were investigated. Inclusion complex was prepared through solution… More >

M.A. Pérez-Limiñana^*, M.M. Sánchez-Navarro, M.J. Escoto-Palacios, F. Arán-Aís, C. Orgilés-Barceló

Journal of Renewable Materials, Vol.4, No.1, pp. 3-8, 2016, DOI:10.7569/JRM.2015.634119

Abstract The tanning i ndustry generates very large quantities of industrial wastes. The advancement of European policy and legislation protecting the environment has prompted the transformation of tannery solid waste materials into valuable co-products, useful to be recycled or employed in other industries. The objective of this work is to obtain gelatine from tannery wastes, in order to reuse it as natural microencapsulating agent in the production of active materials with functional properties. Concretely, this paper focuses on the influence of the extraction temperature on gelatine properties and its microencapsulating ability. An alternative enzymatic pre-treatment to the conventional alkaline one is… More >

Jieping Liu¹, Lingxin Zhang^1,*, Haohao Zhang², Tao Liu¹

Structural Durability & Health Monitoring, Vol.13, No.2, pp. 123-142, 2019, DOI:10.32604/sdhm.2019.04486

Abstract As there is a lack of earthquake damage data for factory buildings with seismic fortifications in China, seismic vulnerability analysis was performed by numerical simulation in this paper. The earthquake-structure analysis model was developed with considering the influence of uncertainties of the ground motion and structural model parameters. The small-size sampling was conducted based on the Latin hypercube sampling and orthogonal design methods. Using nonlinear analysis, the seismic vulnerability curves and damage probability matrix with various seismic fortification intensities (SFI) were obtained. The seismic capacity of the factory building was then evaluated. The results showed that, with different designs at… More >

A. Joshuva¹, V. Sugumaran²

Structural Durability & Health Monitoring, Vol.13, No.2, pp. 181-203, 2019, DOI:10.32604/sdhm.2019.00287

Abstract Wind turbine blades are generally manufactured using fiber type material because of their cost effectiveness and light weight property however, blade get damaged due to wind gusts, bad weather conditions, unpredictable aerodynamic forces, lightning strikes and gravitational loads which causes crack on the surface of wind turbine blade. It is very much essential to identify the damage on blade before it crashes catastrophically which might possibly destroy the complete wind turbine. In this paper, a fifteen tree classification based machine learning algorithms were modelled for identifying and detecting the crack on wind turbine blades. The models are built based on… More >

Meiling Zhuang^1,2, Changqing Miao^1,2,*, Rongfeng Chen^1,2

Structural Durability & Health Monitoring, Vol.13, No.2, pp. 205-225, 2019, DOI:10.32604/sdhm.2019.04654

Abstract To study the fatigue performance of welded details in the orthotropic steel decks, the steel box girder for Taizhou Yangtze River Bridge is taken as the research object. Based on the field monitoring data obtained from the load test, the stress response test of the orthotropic steel box girder under wheel loads is performed and the correctness of the vehicle test data obtained from the field monitoring data also have been verified by the numerical results of the finite element model. Based on the Miner linear cumulative damage theory, the S-N curve of the Eurocode3 specification is referenced, and the… More >

Ying Zhao¹, Mohammad Noori^1,2, Wael A. Altabey^1,3,*, Ramin Ghiasi⁴, Zhishen Wu¹

Structural Durability & Health Monitoring, Vol.13, No.1, pp. 85-103, 2019, DOI:10.32604/sdhm.2019.04695

Abstract This paper introduces a stiffness reduction based model developed by the authors to characterize accumulative fatigue damage in unidirectional plies and (0/θ/0) composite laminates in fiber reinforced polymer (FRP) composite laminates. The proposed damage detection model is developed based on a damage evolution mechanism, including crack initiation and crack damage progress in matrix, matrix-fiber interface and fibers. Research result demonstrates that the corresponding stiffness of unidirectional composite laminates is reduced as the number of loading cycles progresses. First, three common models in literatures are presented and compared. Tensile viscosity, Young’s modulus and ultimate tensile stress of composites are incorporated as… More >

Vinay Shimpi¹, Madappa V. R. Sivasubramanian^1,*, S. B. Singh²

Structural Durability & Health Monitoring, Vol.13, No.1, pp. 1-40, 2019, DOI:10.32604/sdhm.2019.05951

Abstract In this review article, the past investigations carried out on heritage structures using Ambient Vibration Test (AVT) and Operational Modal Analysis (OMA) for system identification (determination of dynamic properties like frequency, mode shape and damping ratios) and associated applications are summarized. A total of 68 major research studies on heritage structures around the world that are available in literature are surveyed for this purpose. At first, field investigations carried out on heritage structures prior to conducting AVT are explained in detail. Next, specifications of accelerometers, location of accelerometers and optimization of accelerometer networks have been elaborated with respect to the… More >

Hai Qian^1,*, Ding Zhou², Bin Gu¹, Rathnayaka Mudiyanselage D. M. S.³

Structural Durability & Health Monitoring, Vol.12, No.4, pp. 281-298, 2018, DOI:10.32604/sdhm.2018.04618

Abstract The temperature fields in the laminated shells were studied, including open cylindrical shells and cylindrical shells, according to the thermal theory. Analytical solution of the temperature in the shells with the known temperature on the surfaces was present. The thinning layer approach was introduced to simplify the three-dimensional heat conduction equation. Firstly, the layered shell was divided into N thinner layers. The governing equation was simplified by replacing the variable r by r0 in the center line of every thin layer. The general solutions of temperature satisfying the simplified three-dimensional governing equation in single-layered shell were deduced in the cylindrical… More >