Iqbal M. Batiha^1,2,*, Iqbal H. Jebril¹, Mohammad Zuriqat³, Hamza S. Kanaan⁴, Shaher Momani^5,*

Frontiers in Heat and Mass Transfer, Vol.21, pp. 487-504, 2023, DOI:10.32604/fhmt.2023.045021

Abstract Several researchers have dealt with the one-dimensional fractional heat conduction equation in the last decades, but as far as we know, no one has investigated such a problem from the perspective of developing suitable fractionalorder methods. This has actually motivated us to address this problem by the way of establishing a proper fractional approach that involves employing a combination of a novel fractional difference formula to approximate the Caputo differentiator of order α coupled with the modified three-point fractional formula to approximate the Caputo differentiator of order 2α, where 0 < α ≤ 1. As a result, the fractional heat… More >

Lioua Kolsi^a,b,*

Frontiers in Heat and Mass Transfer, Vol.7, pp. 1-10, 2016, DOI:10.5098/hmt.7.26

Abstract In this study, the effects of Richardson and Hartmann numbers on heat and mass transfer in a three-dimensional lid-driven cubical cavity subjected to a uniform magnetic field are investigated numerically. The lid is maintained at constant high temperature and is moving downwards in the negative y-direction. The wall opposite to the lid is stationary and maintained at constant low temperature, and all other walls are kept adiabatic. Entropy generation is also calculated to investigate the nature of irreversibility in heat transfer inside the cavity. The computations are performed for the Richardson numbers 10 and 100, and Hartmann number in the… More >

Liufeng Du^1,*, Shaoru Shang¹, Linghua Zhang², Chong Li¹, Jianing Yang³, Xiyan Tian¹

CMES-Computer Modeling in Engineering & Sciences, Vol.138, No.2, pp. 1749-1767, 2024, DOI:10.32604/cmes.2023.030144

Abstract Due to the fine-grained communication scenarios characterization and stability, Wi-Fi channel state information (CSI) has been increasingly applied to indoor sensing tasks recently. Although spatial variations are explicitly reflected in CSI measurements, the representation differences caused by small contextual changes are easily submerged in the fluctuations of multipath effects, especially in device-free Wi-Fi sensing. Most existing data solutions cannot fully exploit the temporal, spatial, and frequency information carried by CSI, which results in insufficient sensing resolution for indoor scenario changes. As a result, the well-liked machine learning (ML)-based CSI sensing models still struggling with stable performance. This paper formulates a… More >

Wei Shi^1,2, Zhengyi Li¹, Xiaobing Xu¹, Yingshui Yu¹, Xiaofei Ding¹, Heng Ju^1,*

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.1, pp. 97-108, 2024, DOI:10.32604/fdmp.2023.029028

Abstract Two-dimensional carbon/carbon (2D C/C) composites are a special class of carbon/carbon composites, generally obtained by combining resin-impregnated carbon fiber clothes, which are then cured and carbonized. This study deals with the preparation of a protective coating for these materials. This coating, based on graphite, was prepared by the slurry method. The effect of graphite and phenolic resin powders with different weight ratios was examined. The results have shown that the coating slurry can fill the pores and cracks of the composite surface, thereby densifying the surface layer of the material. With the increase of the graphite powder/phenolic resin weight ratio,… More >

Vitaliy Suvorov^1,2,*, Olga Loboda², Maria Balakina¹, Igor Kulczycki²

Congenital Heart Disease, Vol.18, No.5, pp. 491-505, 2023, DOI:10.32604/chd.2023.030583

Abstract Background: Three-dimensional printing technology may become a key factor in transforming clinical practice and in significant improvement of treatment outcomes. The introduction of this technique into pediatric cardiac surgery will allow us to study features of the anatomy and spatial relations of a defect and to simulate the optimal surgical repair on a printed model in every individual case. Methods: We performed the prospective cohort study which included 29 children with congenital heart defects. The hearts and the great vessels were modeled and printed out. Measurements of the same cardiac areas were taken in the same planes and points at… More > Graphic Abstract

Yi-Li Huang¹, Fang-Yie Leu^1,2,*, Ruey-Kai Sheu¹, Jung-Chun Liu¹, Chi-Jan Huang^2,3

CMC-Computers, Materials & Continua, Vol.77, No.1, pp. 1143-1164, 2023, DOI:10.32604/cmc.2023.037161

Abstract Currently, data security mainly relies on password (PW) or system channel key (SK_CH) to encrypt data before they are sent, no matter whether in broadband networks, the 5th generation (5G) mobile communications, satellite communications, and so on. In these environments, a fixed password or channel key (e.g., PW/SK_CH) is often adopted to encrypt different data, resulting in security risks since this PW/SK_CH may be solved after hackers collect a huge amount of encrypted data. Actually, the most popularly used security mechanism Advanced Encryption Standard (AES) has its own problems, e.g., several rounds have been solved. On the other hand, if… More >

Rufus Gikera^1,*, Jonathan Mwaura², Elizaphan Muuro³, Shadrack Mambo³

Journal on Artificial Intelligence, Vol.5, pp. 75-112, 2023, DOI:10.32604/jai.2023.043229

Abstract k-means is a popular clustering algorithm because of its simplicity and scalability to handle large datasets. However, one of its setbacks is the challenge of identifying the correct k-hyperparameter value. Tuning this value correctly is critical for building effective k-means models. The use of the traditional elbow method to help identify this value has a long-standing literature. However, when using this method with certain datasets, smooth curves may appear, making it challenging to identify the k-value due to its unclear nature. On the other hand, various internal validation indexes, which are proposed as a solution to this issue, may be… More >

Michele Straface¹, Wu Xu^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.2, pp. 1-1, 2023, DOI:10.32604/icces.2023.09657

Abstract Fracture analysis is a problem playing a fundamental role in the fields of Aerospace Mechanics and Structural Mechanics. The paper deals with the analysis of the most essential among the fracture problems: the one-dimensional crack in a double cantilever beam. The report presents a reliable analytical method to correctly partition the energy release rates into pure fracture modes, appliable to both isotropic and composite beams with clearly known mechanical properties, subject to shearing or bending loads. The adopted strategy is based on the Timoshenko’s kinematic model and exploits the theoretical definition of the I and II pure energy release rate… More >

Hang Yang^1,2,3,*, Xunbo Li¹, Witold Pedrycz²

Intelligent Automation & Soft Computing, Vol.37, No.3, pp. 3039-3058, 2023, DOI:10.32604/iasc.2023.040412

Abstract Fire rescue challenges and solutions have evolved from straightforward plane rescue to encompass 3D space due to the rise of high-rise city buildings. Hence, this study facilitates a system with quick and simplified on-site launching and generates real-time location data, enabling fire rescuers to arrive at the intended spot faster and correctly for effective and precise rescue. Auto-positioning with step-by-step instructions is proposed when launching the locating system, while no extra measuring instrument like Total Station (TS) is needed. Real-time location tracking is provided via a 3D space real-time locating system (RTLS) constructed using Ultra-wide Bandwidth technology (UWB), which requires… More >

Hongfei Ye^1,*, Chenguang Yin¹, Jian Wang¹, Yonggang Zheng¹, Hongwu Zhang¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.1, pp. 1-1, 2023, DOI:10.32604/icces.2023.09741

Abstract The wetting behavior is ubiquitous in natural phenomenon as well as engineering application. As an intrinsic property of solid surface, the wettability with a controllable gradient has been an attractive issue with a wide application in various fields, including microfluidic devices, self-driven transport, biotechnologies, etc. Generally, it often requires elaborate design of microstructure or its response under the electrical, thermal, optical, pH stimuli, etc. However, the relevant complex underlying mechanism makes it difficult to construct quantitative relations between the wettability and the external field for the fine design. In this work, based on the bilayer two-dimensional materials, a simple controlling… More >