Sharnappa¹, N. Ganesan², Raju Sethuraman³

CMES-Computer Modeling in Engineering & Sciences, Vol.18, No.2, pp. 121-144, 2007, DOI:10.3970/cmes.2007.018.121

Abstract This article presents the study on buckling and free vibration behavior of sandwich general shells of revolution under thermal environment using Wilkins theory. The temperature assumes to be uniform over the shell structure. The numerical analysis is based on the semi-analytical finite element method applicable to thick shells. The analysis is carried out for different geometry such as truncated conical and hemispherical shells with various facing and core materials under clamped-clamped boundary condition. The parametric study is carried out for different core to facing (t_c / t_f) thickness ratio by considering the temperature dependent and independent material properties of the… More >

U. Andreaus^1,3, R.C. Batra², M. Porfiri^{2, 3}

CMES-Computer Modeling in Engineering & Sciences, Vol.9, No.2, pp. 111-132, 2005, DOI:10.3970/cmes.2005.009.111

Abstract Structural health monitoring techniques based on vibration data have received increasing attention in recent years. Since the measured modal characteristics and the transient motion of a beam exhibit low sensitivity to damage, numerical techniques for accurately computing vibration characteristics are needed. Here we use a Meshless Local Petrov-Galerkin (MLPG) method to analyze vibrations of a beam with multiple cracks. The trial and the test functions are constructed using the Generalized Moving Least Squares (GMLS) approximation. The smoothness of the GMLS basis functions requires the use of special techniques to account for the slope discontinuities at the crack locations. Therefore, a… More >

M. Kröger¹, M. Müller², J. Nievergelt²

CMES-Computer Modeling in Engineering & Sciences, Vol.4, No.5, pp. 559-570, 2003, DOI:10.3970/cmes.2003.004.559

Abstract We present a novel method for generating starting polymer structures for molecular simulations in the dense phase. The work describes the ingredients of an algorithm for the creation of large, dense or diluted amorphous polymeric systems close to equilibrium and provides measures for its quality. The model systems are made of semiflexible (wormlike) repulsive multibead chains. The key feature of the method is its efficiency, in particular for large systems, while approaching given local and global chain characteristics. Its output has been proven to serve as an excellent basis for subsequent off-lattice molecular dynamics computer simulation. By combining chain growing… More >

L. F. Qian^1,2, R. C. Batra³, L. M. Chen¹

CMES-Computer Modeling in Engineering & Sciences, Vol.4, No.5, pp. 519-534, 2003, DOI:10.3970/cmes.2003.004.519

Abstract We use a meshless local Petrov-Galerkin (MLPG) method to analyze three-dimensional infinitesimal elastodynamic deformations of a homogeneous rectangular plate subjected to different edge conditions. We employ a higher-order plate theory in which both transverse shear and transverse normal deformations are considered. Natural frequencies and the transient response to external loads have been computed for isotropic and orthotropic plates. Computed results are found to agree with those obtained from the analysis of the 3-dimensional problem either analytically or by the finite element method. More >

Y. T. Gu, G. R. Liu¹

CMES-Computer Modeling in Engineering & Sciences, Vol.2, No.4, pp. 463-476, 2001, DOI:10.3970/cmes.2001.002.463

Abstract A meshless method for the analysis of Kirchhoff plates based on the Meshless Local Petrov-Galerkin (MLPG) concept is presented. A MLPG formulation is developed for static and free vibration analyses of thin plates. Local weak form is derived using the weighted residual method in local supported domains from the 4th order partial differential equation of Kirchhoff plates. The integration of the local weak form is performed in a regular-shaped local domain. The Moving Least Squares (MLS) approximation is used to constructed shape functions. The satisfaction of the high continuity requirements is easily met by MLS interpolant, which is based on… More >

S. Srinivasan¹, M. Z. Saghir¹

FDMP-Fluid Dynamics & Materials Processing, Vol.7, No.2, pp. 201-216, 2011, DOI:10.3970/fdmp.2011.007.201

Abstract CFD simulations have been made to understand the impact of the vibrations of the ISS on the thermodiffusion process. Simulations were made for two ternary hydrocarbon mixtures and one binary associated mixture. While one of the ternary mixture was at a pressure of 35 MPa, the second ternary mixture as well as the binary mixture were at a pressure of 0.101325 MPa. The analysis of the results showed that imposing the ISS vibrations had a profound effect on the Soret effect in all three systems. More precisely, in all three mixtures, a single convective flow cell is established. Such a… More >

L. Bennamoun¹, A. Belhamri²

FDMP-Fluid Dynamics & Materials Processing, Vol.4, No.4, pp. 221-230, 2008, DOI:10.3970/fdmp.2008.004.221

Abstract This work focuses on tyipical heat and mass transfer phenomena during the processing of products in the context of the packed-bed drying method (products arranged in thick layers into dryers working in forced convection mode). The dryers are modeled as porous media at the macroscopic level. The simulations are carried out using the mass, momentum (written in the framework of the Darcy's law approximation) and energy equations applied for the different components. A diffusion model based on Fick's law is also used to take into account the drying kinetics. This approach allows monitoring of the variations of humidity and temperature… More >

A.A. Ivanova¹, V.G. Kozlov^1,2,3, D.A. Polezhaev¹, D. Pareau³, M. Stambouli³

FDMP-Fluid Dynamics & Materials Processing, Vol.4, No.3, pp. 211-220, 2008, DOI:10.3970/fdmp.2008.004.211

Abstract The problem for the optimization of mass-transfer on the interface of two immiscible liquids by means of vibrational hydromechanics is studied experimentally. A new vibrational cell of Lewis's type expressly conceived for such purposes is described. Flow is generated by activators in the form of disks inducing translational axial oscillations near the opposite end faces of the cavity. It is shown that such vibrating disks can lead to the onset of a large-scale toroidal whirlwind effectively mixing the liquid throughout the volume. According to the experiments, in particular, axisymmetrical radial flows are generated on both sides of the horizontal liquid… More >

G.Pétré¹, K.Tshinyama, A. Azouni², S. Van Vaerenbergh¹

FDMP-Fluid Dynamics & Materials Processing, Vol.4, No.1, pp. 1-10, 2008, DOI:10.3970/fdmp.2008.004.001

Abstract This study illustrates a relevant and practical method to determine the effective surface tension gradient in a layer subjected to a lateral temperature difference. In general, this can be hardly performed in situ without perturbing the flow. For this reason we rely on an indirect determination approach. A simple model is developed that relates the surface tension gradient to other quantities that can be measured without introducing significant disturbances in the system. Measurements of these quantities are performed in a set-up where the flow corresponds with a good approximation to a one-dimensional model. A previously used set-up has been upgraded… More >

V.G. Kozlov¹, N.V. Selin²

FDMP-Fluid Dynamics & Materials Processing, Vol.2, No.2, pp. 107-118, 2006, DOI:10.3970/fdmp.2006.002.107

Abstract Thermal vibrational convection in a sector of a thin spherical liquid layer subjected to pendulum vibrations (spherical pendulum) is investigated theoretically and experimentally. Temperature non-uniformity inside the liquid is caused by uniformly distributed internal heat sources (one side of the layer is isothermal, the other one is adiabatic). Experiments are carried out under conditions of stable temperature stratification in the gravity field. Heat transfer and convective structure are investigated in a wide interval of governing dimensionless parameters. A critical increase of heat transfer is revealed as the vibrations intensity is increased, caused by average convection. It is shown that thermal… More >