Cheng Wang¹, Jianguo Ning¹, Tianbao Ma¹

CMC-Computers, Materials & Continua, Vol.22, No.1, pp. 73-96, 2011, DOI:10.3970/cmc.2011.022.073

Abstract In this paper, we report high resolution simulations using a fifth-order weighted essentially non-oscillatory (WENO) scheme with a third-order TVD Runge-Kutta time stepping method to examine the features of the detonation for gas and condensed explosives. A two-stage chemical reaction model and an ignition and growth model are employed to describe the chemical reaction process for gas and condensed explosives. Based on the Steger-Warming vector flux splitting method, a splitting method is employed when the vector flux does not satisfy the homogeneity property for simulating detonation wave propagation for condensed explosives. The sensibility of flame propagation process and explosion overpressure… More >

Smitha Gopinath^1,2, A. Ramach,ra Murthy¹, Nagesh R. Iyer¹

CMC-Computers, Materials & Continua, Vol.22, No.1, pp. 55-72, 2011, DOI:10.3970/cmc.2011.022.055

Abstract This paper presents the mathematical modeling techniques for nonlinear finite element analysis of RC structure to incorporate uniform corrosion effects. Effect of corrosion has been simulated as reduction in effective cross-sectional area of reinforcing bar, reduction in bonding phenomena and as reduction in material properties of reinforcing bar such as yield strength and elastic modulus. Appropriate constitutive laws for (i) corroded rebar elements and (ii) bond slip with corroded bar have been described. Procedure has been outlined to determine the global damage indicator by secant stiffness based approach. A corroded RC beam has been analysed to validate the proposed model… More >

S. D. Akbarov^1,2, S. Karakaya³

CMC-Computers, Materials & Continua, Vol.22, No.1, pp. 1-38, 2011, DOI:10.3970/cmc.2011.022.001

Abstract The 3D approach was employed for investigations of the stability loss of the solid circular cylinder made from viscoelastic composite material. This approach is based on investigations of the evolution of the initial infinitesimal imperfections of the cylinder within the scope of 3D geometrically nonlinear field equations of the theory of viscoelasticity for anisotropic bodies. The numerical results of the critical forces and critical time are presented and discussed. To illustrate the importance of the results obtained using the 3D approach, these results are compared with the corresponding ones obtained by employing various approximate beam theories. The viscoelasticity properties of… More >

Le-Le Zhang¹, Xue-Qian Fang¹, Jin-Xi Liu¹, Ji-Hong Ma¹

CMC-Computers, Materials & Continua, Vol.21, No.3, pp. 171-186, 2011, DOI:10.3970/cmc.2011.021.171

Abstract On the basis of continuum surface elasticity, two interacting cylindrical nano-inhomogeneities with surface/interface effect in a small-sized solid under anti-plane shear waves are investigated, and the dynamic stress around the nano-inhomogeneities is analyzed. The wave function expansion method is used to expressed the wave field around the two nano-inhomogeneities. The total wave field is obtained by the addition theorem for cylindrical wave function. Through analysis, it is found that the distance between the two nano-inhomogeneities shows great effect on the dynamic stress in nano composites. The effect of the distance is also related to the properties of the nano-inhomogeneities and… More >

W.H. Chen¹, C.W. Hong^1,2

CMC-Computers, Materials & Continua, Vol.21, No.2, pp. 147-170, 2011, DOI:10.3970/cmc.2011.021.147

Abstract Nanorod/nanowell/nanotube arrays are effective nanotechnologies that can increase the performance of a photo-electrochemical solar cell by increasing the reaction area of the working electrode. However, the confined space due to the nano-arrays also tends to decrease the redox ion diffusivity. This paper describes computer modeling on the ionic diffusion of the active species (I-/I3-) among the nano-arrays of the working electrode material (TiO2). A three dimensional periodic boundary molecular dynamics simulation technique is employed to simulate the nano-scale transport phenomenon. Performance improvement tendency can be evaluated from the Butler-Volmer equation. Simulation results reveal that the increasing reaction area times the… More >

Surkay D. Akbarov^1,2, Resat Kosker³, Nihan T. Cinar³

CMC-Computers, Materials & Continua, Vol.21, No.2, pp. 119-146, 2011, DOI:10.3970/cmc.2011.021.119

Abstract In the present paper, the stress distribution in an infinite elastic body containing two neighboring nanofibers is studied. It is assumed that the midlines of the fibers are in the same plane. With respect to the location of the fibers according to each other the co-phase and anti-phase curving cases are considered. At infinity uniformly distributed normal forces act in the direction of the nanofibers, location. The investigations are carried out in the framework of the piecewise homogeneous body model with the use of the three-dimensional geometrically non-linear exact equations of the theory of elasticity. The normal and shear self-equilibrated… More >

S. H. Kwon¹, B. R. Kim², H. K. Lee^2,3

CMC-Computers, Materials & Continua, Vol.21, No.1, pp. 65-86, 2011, DOI:10.3970/cmc.2011.021.065

Abstract The electromagnetic shielding effectiveness of grid-mesh films made of polyaniline was numerically investigated, and the optimal size of the polyaniline grid was determined through numerical analyses. The permittivity of polyaniline was first determined from an inverse analysis based on experimental data. A series of numerical analyses were carried out with 225 polyaniline grid-mesh films of different thickness, spacing, and width, and the shielding effectiveness of every grid was examined. In addition to the numerical analysis, the transparency of the grid-mesh films and the amount of polyaniline material required to manufacture the unit grid area (1mx1m) were calculated. The optimal dimensions… More >

Chein-Shan Liu¹

CMC-Computers, Materials & Continua, Vol.21, No.1, pp. 17-40, 2011, DOI:10.3970/cmc.2011.021.017

Abstract Only the left-boundary data of temperature and heat flux are used to estimate an unknown parameter function α(x) in T_t(x,t) = ∂(α(x)T_x)/∂x + h(x,t), as well as to recover the right-boundary data. When α(x) is given the above problem is a well-known inverse heat conduction problem (IHCP). This paper solves a mixed-type inverse problem as a combination of the IHCP and the problem of parameter identification, without needing to assume a function form of α(x) a priori, and without measuring extra data as those used by other methods. We use the one-step Lie-Group Adaptive Method (LGAM) for the semi-discretizations of… More >

V.G.Yakhno¹

CMC-Computers, Materials & Continua, Vol.21, No.1, pp. 1-16, 2011, DOI:10.3970/cmc.2011.021.001

Abstract Homogeneous non-dispersive anisotropic materials, characterized by a positive constant permeability and a symmetric positive definite conductivity tensor, are considered in the paper. In these anisotropic materials, the electric and magnetic dyadic Green's functions are defined as electric and magnetic fields arising from impulsive current dipoles and satisfying the time-dependent Maxwell's equations in quasi-static approximation. A new method of deriving these dyadic Green's functions is suggested in the paper. This method consists of several steps: equations for electric and magnetic dyadic Green's functions are written in terms of the Fourier modes; explicit formulae for the Fourier modes of dyadic Green's functions… More >

Rong-gang Zhang^1,2, Hong-tao Zhang³ , Yu-xing Bai³, Jian-ling Gao³, Lai-yong Zhang² , Bing-ye Xu¹

CMC-Computers, Materials & Continua, Vol.20, No.3, pp. 243-250, 2010, DOI:10.3970/cmc.2010.020.243

Abstract Based on the upper bound theorem, the fire resistance is studied using the combination of element collapse mechanisms of steel frames, where the element collapse mechanisms are automatically determined from independent mechanisms. The fire limit load is calculated by solving a nonlinear mathematical programming. The computing procedure is programmed by FORTRAN language. Results show that this method is useful to find the collapse mechanism with the lowest fire limit load, which can provide a theoretical and practical way for the fire design of steel frame structure. More >