A Rama Chandra Murthy¹, Smitha Gopinath^1,2, Ashish Shrivastav¹, G. S. Palani¹, Nagesh R. Iyer¹

CMC-Computers, Materials & Continua, Vol.25, No.1, pp. 1-18, 2011, DOI:10.3970/cmc.2011.025.001

Abstract This paper presents methodologies for crack growth study and fatigue remaining life prediction of reinforced concrete structural components accounting for the corrosion effects. Stress intensity factor (SIF) has been computed by using the principle of superposition. At each incremental crack length, net SIF has been computed as the difference of SIF of plain concrete and reinforcement. The behaviour of reinforcement has been considered as elasto-plastic. Uniform corrosion rate has been assumed in the modeling. Corrosion effect has been accounted in the form of reduction in the diameter and modulus of elasticity of steel. Numerical studies have been carried out to… More >

Ke Jin¹, Yong Kou¹, Xiaojing Zheng^1,2

CMC-Computers, Materials & Continua, Vol.24, No.2, pp. 143-162, 2011, DOI:10.3970/cmc.2011.024.143

Abstract This paper is concerned with a 3-D general constitutive law of nonlinear magneto-thermo-elastic coupling for magnetostrictive materials. The model considered here is thermodynamically motivated and based on the Gibbs free energy function. A set of closed and analytical expressions of the constitutive relationships for the magnetostrictive materials are obtained, in which all parameters can be determined by those measurable experiments in mechanics and physics. Then the model can be simplified to two cases, i.e. magnetostrictive rods and films. It is found that the predictions from this model are in good accordance with the experimental data including both rods and films.… More >

Kotaro Mori¹, Fumio Narita¹, Yasuhide Shindo¹

CMC-Computers, Materials & Continua, Vol.23, No.3, pp. 187-200, 2011, DOI:10.3970/cmc.2011.023.187

Abstract This work deals with the response of clamped-free magnetostrictive/piezoelectric/magnetostrictive laminates under electric field both numerically and experimentally. The laminate is fabricated using two magnetostrictive Terfenol-D layers and a soft piezoelectric PZT layer. Easy axis of Terfenol-D layers is length direction, while the polarization of PZT layer is the thickness direction. The magnetostriction of the Terfenol-D layers bonded to the upper and lower surfaces of the PZT layer is first measured. Next, a nonlinear finite element analysis is employed to evaluate the second-order magnetoelastic constants in the Terfenol-D layers bonded to the PZT layer using measured data. The induced magnetic field… More >

Chih-Wen Chang¹

CMC-Computers, Materials & Continua, Vol.21, No.2, pp. 87-106, 2011, DOI:10.3970/cmc.2011.021.087

Abstract We address a new numerical approach to deal with these multi-dimensional backward wave problems (BWPs) in this study. A fictitious time τ is utilized to transform the dependent variable u(x, y, z, t) into a new one by (1+τ)u(x, y, z, t)=: v(x, y, z, t, τ), such that the original wave equation is written as a new hyperbolic type partial differential equation in the space of (x, y, z, t, τ). Besides, a fictitious viscous damping coefficient can be employed to strengthen the stability of numerical integration of the discretized equations by using a group preserving scheme. Several numerical… More >

N.J. Bartle¹, P.D. Gosling¹

CMC-Computers, Materials & Continua, Vol.20, No.1, pp. 19-62, 2010, DOI:10.3970/cmc.2010.020.019

Abstract ETFE cushions are increasingly being used to form high-profile facades and structural forms. This investigation aims to extend an analytical theory of large deformation in order to predict the shape and stress distributions of an un-patterned square ETFE cushion without the need to resort to discretised numerical methods. In order to assess the validity of the theoretical procedure a prototype cushion has been analysed using a finite element simulation. The theoretical procedure is also compared with alternative approximate equations proposed for the design of ETFE cushions. More >

Chih-Wen Chang¹

CMC-Computers, Materials & Continua, Vol.19, No.3, pp. 285-314, 2010, DOI:10.3970/cmc.2010.019.285

Abstract In this article, we propose a new numerical approach for solving these multi-dimensional nonlinear and nonhomogeneous backward heat conduction problems (BHCPs). A fictitious time t is employed to transform the dependent variable u(x, y, z, t) into a new one by (1+t)u(x, y, z, t)=: v(x, y, z, t, t), such that the original nonlinear and nonhomogeneous heat conduction equation is written as a new parabolic type partial differential equation in the space of (x, y, z, t, t). In addition, a fictitious viscous damping coefficient can be used to strengthen the stability of numerical integration of the discretized equations… More >

Veturia Chiroiu¹, Ligia Munteanu¹, Pier Paolo Delsanto²

CMC-Computers, Materials & Continua, Vol.16, No.1, pp. 75-100, 2010, DOI:10.3970/cmc.2010.016.075

Abstract Conventional continuum theories are unable to capture the observed indentation size effects, due to the lack of intrinsic length scales that represent the measures of nanostructure in the constitutive relations. In order to overcome this deficiency, the Toupin-Mindlin strain gradient theory of nanoindentation is formulated in this paper and the size dependence of the hardness with respect to the depth and the radius of the indenter for multiple walled carbon nanotubes is investigated. Results show a peculiar size influence on the hardness, which is explained via the shear resistance between the neighboring walls during the buckling of the multiwalled nanotubes. More >

Chen Y J^1,2, Huber N^2,3

CMC-Computers, Materials & Continua, Vol.16, No.1, pp. 1-24, 2010, DOI:10.3970/cmc.2010.016.001

Abstract An efficient wear integration algorithm is crucial for the simulation of wear in complex transient contact situations. By rewriting Archard's wear law for two dimensional problems, the wear integration can be replaced by the total contact force. This avoids highly resolved simulations in time and space, so that the proposed method allows a significant acceleration of wear simulations. All quantities, including the average contact velocity, slip rate and total contact force, which are required for the pressure-force transformation, can be determined from geometric and motion analysis, or alternatively, from Finite Element simulations. The proposed CForce method has been implemented into… More >

Chein-Shan Liu¹

CMC-Computers, Materials & Continua, Vol.15, No.3, pp. 221-240, 2010, DOI:10.3970/cmc.2010.015.221

Abstract We propose a simple numerical scheme for solving the space- and time-fractional derivative Burgers equations: D_t^αu + εuu_x = vu_xx + ηD_x^βu, 0 < α, β ≤ 1, and u_t + D_*^β(D_*^1-βu)²/2 = vu_xx, 0 < β ≤ 1. The time-fractional derivative D_t^αu and space-fractional derivative D_x^βu are defined in the Caputo sense, while D_*^βu is the Riemann-Liouville space-fractional derivative. A fictitious time τ is used to transform the dependent variable u(x,t) into a new one by (1+τ)^γu(x,t) =: v(x,t,τ), where 0 < γ ≤ 1 is a parameter, such that the original equation is written as a new functional-differential… More >

Hao-Miao Zhou¹, Fang Li¹, Qiang Ye¹, Ji-Xiang Zhao¹, Zhe-Lei Xia¹, YingTang², Jing Wei³

CMC-Computers, Materials & Continua, Vol.13, No.3, pp. 235-248, 2009, DOI:10.3970/cmc.2009.013.235

Abstract At present, there are many methods about Young's modulus measurement of thin films, but so far there is no recognized simple, non-destructive and cheaper standard measurement method. Considering thin films with various thicknesses were sputter deposited on the magnetostrictive resonator and monitoring the resonator's first-order longitudinal resonant frequency shift both before and after deposition induced by external magnetic field, an Young's modulus assessing method based on classical laminated plate theory is presented in this paper. Using the measured natural frequencies of Au, Cu, Cr, Al and SiC materials with various thicknesses in the literature, the Young's modulus of the five… More >