A. Radhouane¹, N. Mahjoub Said¹, H. Mhiri¹, G. Le Palec², P. Bournot²

FDMP-Fluid Dynamics & Materials Processing, Vol.6, No.4, pp. 385-398, 2010, DOI:10.3970/fdmp.2010.006.385

Abstract "Twin jets in crossflow" is a complex configuration that raises an increasing interest due to its presence in various common applications such as chimney stacks, film cooling, VSTOL aircrafts, etc... In the present paper, the twin jets were arranged inline with an oncoming crossflow;they were also inclined which resulted in similar elliptic cross sections of the nozzles' exits. The exploration of the flows in interaction was carried out numerically by means of the finite volume method together with the second order turbulent closure model, namely the Reynolds stress Model (RSM), and a non uniform grid system particularly refined near the… More >

M.R. Arab^1,2, E. Semma³, B. Pateyron¹, M. El Ganaoui¹

FDMP-Fluid Dynamics & Materials Processing, Vol.5, No.2, pp. 161-176, 2009, DOI:10.3970/fdmp.2009.005.161

Abstract In this work, flows in porous media are simulated by using a Lattice Boltzmann Method (LBM). A model D2Q9 with a single collision operator is proposed. This method is applied on 2D digital images obtained by a Scanning Electron Microscope technique (SEM), and followed by a special treatment in order to obtain an image of synthesis that is finally read by the numerical code. The first results tested on two-dimensional configurations show the reliability of this strategy in simulating with a good accuracy phenomena of heat and mass transport. The numerical study is extended to the prediction of physical parameters… More >

Aouachria Z¹

FDMP-Fluid Dynamics & Materials Processing, Vol.5, No.2, pp. 137-148, 2009, DOI:10.3970/fdmp.2009.005.137

Abstract This work treats heat and mass transfer by natural convection along a vertical wall in porous media imbibed by fluid, using an integral method. The problem governing parameters are the buoyancy ratio,N, and the Lewis number, Le The results for the local Nusselt and Sherwood numbers are presented for a large range of these parameters. The concentration and thermal boundary layer thickness are also determined. We observe that our results are in good agreement with those obtained by Bejan and Khair (1985). More >

L. Bennamoun¹, A. Belhamri²

FDMP-Fluid Dynamics & Materials Processing, Vol.4, No.4, pp. 221-230, 2008, DOI:10.3970/fdmp.2008.004.221

Abstract This work focuses on tyipical heat and mass transfer phenomena during the processing of products in the context of the packed-bed drying method (products arranged in thick layers into dryers working in forced convection mode). The dryers are modeled as porous media at the macroscopic level. The simulations are carried out using the mass, momentum (written in the framework of the Darcy's law approximation) and energy equations applied for the different components. A diffusion model based on Fick's law is also used to take into account the drying kinetics. This approach allows monitoring of the variations of humidity and temperature… More >

A.A. Ivanova¹, V.G. Kozlov^1,2,3, D.A. Polezhaev¹, D. Pareau³, M. Stambouli³

FDMP-Fluid Dynamics & Materials Processing, Vol.4, No.3, pp. 211-220, 2008, DOI:10.3970/fdmp.2008.004.211

Abstract The problem for the optimization of mass-transfer on the interface of two immiscible liquids by means of vibrational hydromechanics is studied experimentally. A new vibrational cell of Lewis's type expressly conceived for such purposes is described. Flow is generated by activators in the form of disks inducing translational axial oscillations near the opposite end faces of the cavity. It is shown that such vibrating disks can lead to the onset of a large-scale toroidal whirlwind effectively mixing the liquid throughout the volume. According to the experiments, in particular, axisymmetrical radial flows are generated on both sides of the horizontal liquid… More >

M.El-Gammal¹, J.M.Floryan¹

FDMP-Fluid Dynamics & Materials Processing, Vol.2, No.1, pp. 17-26, 2006, DOI:10.3970/fdmp.2006.002.017

Abstract Interface deformation and thermocapillary rupture in a cavity with free upper surface subject to concentrated heating from above is investigated. The dynamics of the process is modulated by placing different amounts of liquid in the cavity. The results determined for large Biot and zero Marangoni numbers show the existence of limit points beyond which steady, continuous interface cannot exist and processes leading to the interface rupture develop. Evolution of the limit point as a function of the mass of the liquid is investigated. The topology of the flow field is found to be qualitatively similar, regardless of whether the cavity… More >

A. Rtibi¹, M. Hasnaoui¹, A. Amahmid¹

FDMP-Fluid Dynamics & Materials Processing, Vol.9, No.2, pp. 183-207, 2013, DOI:10.3970/fdmp.2013.009.183

Abstract In this paper we present an analytical and numerical study of Soret convection in an inclined rectangular porous layer saturated with a binary fluid and subject to uniform heat fluxes. In the problem formulation, the Darcy model is considered and the results are presented for wide ranges of R_T (50 ≤ R_T ≤ 1000), θ(0°≤θ≤180°) and φ(-1 ≤ φ ≤ 1) for Le = 10, where R_T, θ, φ, and Le are the thermal Darcy-Rayleigh number, the cavity inclination, the separation parameter, and the Lewis number, respectively. An analytical solution, derived on the basis of the parallel flow approximation, is… More >

Afzal Badshah¹, Anwar Ghani¹, Muhammad Ahsan Qureshi², Shahaboddin Shamshirband,^3,4,*

CMC-Computers, Materials & Continua, Vol.61, No.1, pp. 81-101, 2019, DOI:10.32604/cmc.2019.06288

Abstract Educational institutions are soft targets for the terrorist with massive and defenseless people. In the recent past, numbers of such attacks have been executed around the world. Conducting research, in order to provide a secure environment to the educational institutions is a challenging task. This effort is motivated by recent assaults, made at Army Public School Peshawar, following another attack at Charsada University, Khyber Pukhtun Khwa, Pakistan and also the Santa Fe High School Texas, USA massacre. This study uses the basic technologies of edge computing, cloud computing and IoT to design a smart emergency alarm system framework. IoT is… More >

Xiaorui Zhang^1,2,3,*, Jiali Duan¹, Jia Liu², Norman I. Badler³

CMC-Computers, Materials & Continua, Vol.60, No.3, pp. 1055-1071, 2019, DOI:10.32604/cmc.2019.03915

Abstract Current research on suture simulation mainly focus on the construction of suture line, and existing suture simulation systems still need to be improved in terms of diversity, soft tissue effects, and stability. This paper presents an integrated liver suture surgery system composed of three consecutive suture circumstances, which is conducive to liver suture surgery training. The physically-based models used in this simulation are based on different mass-spring models regulated by a special constrained algorithm, which can improve the model accuracy, and stability by appropriately restraining the activity sphere of the surrounding mass nodes around the suture points. We also studied… More >

Zhiliang Wang^1,*, Youpeng Huang¹, Feng Xiong¹

CMC-Computers, Materials & Continua, Vol.60, No.3, pp. 1189-1206, 2019, DOI:10.32604/cmc.2019.04972

Abstract This article reports numerical results investigating the damage evolution and spatial distribution characteristics of intact and jointed rockmass subjected to blast loading. The behaviors of rock material are described by the Holmquist- Johnson-Cook (HJC) constitutive model incorporated in the finite element software LS-DYNA. Results indicate that the damage distribution shows a reverse S-shape attenuation with the increase of the distance from borehole, and a better goodness of fit with the Logistic function is observed. In the single-hole blasting of jointed rockmass, there are two types of regions around the intersection of borehole and joint in which the damage degree is… More >