Ran Wang¹, Aimin Gong^1,*, Shanqing Shao¹, Baoli Qu², Jing Xu³, Fulai Wang¹, Feipeng Liu^3,*

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.4, pp. 749-769, 2024, DOI:10.32604/fdmp.2023.042566

Abstract The mechanical properties of cementitious sand and gravel damming material have been experimentally determined by means of microscopic SEM (Scanning Electron Microscopy) image analysis. The results show that the combination of fly ash and water can fill the voids in cemented sand and gravel test blocks because of the presence of hydrated calcium silicate and other substances; thereby, the compactness and mechanical properties of these materials can be greatly improved. For every 10 kg/m³ increase in the amount of cementitious material, the density increases by about 2%, and the water content decreases by 0.2%. The amount of cementitious material used… More > Graphic Abstract

Ming Liu¹, Pinghua Zhu^2,*, Xiancui Yan², Haichao Li², Xintong Chen²

Journal of Renewable Materials, Vol.12, No.2, pp. 329-347, 2024, DOI:10.32604/jrm.2023.045381

Abstract As socioeconomic development continues, the issue of building energy consumption has attracted significant attention, and improving the thermal insulation performance of buildings has become a crucial strategic measure. Simultaneously, the application of solid waste in insulation materials has also become a hot topic. This paper reviews the sources and classifications of solid waste, focusing on research progress in its application as insulation materials in the domains of daily life, agriculture, and industry. The research shows that incorporating household solid waste materials, such as waste glass, paper, and clothing scraps into cementitious thermal insulation can significantly reduce the thermal conductivity of… More >

Zhengrong Shi^1,3, Jie Ren¹, Tao Zhang^1,3,*, Yanming Shen^2,*

Energy Engineering, Vol.121, No.3, pp. 681-702, 2024, DOI:10.32604/ee.2023.045238

Abstract Building energy consumption and building carbon emissions both account for more than 20% of their total national values in China. Building employing phase change material (PCM) for passive temperature control shows a promising prospect in meeting the comfort demand and reducing energy consumption simultaneously. However, there is a lack of more detailed research on the interaction between the location and thickness of PCM and indoor natural convection, as well as indoor temperature distribution. In this study, the numerical model of a passive temperature-controlled building integrating the developed PCM module is established with the help of ANSYS. In which, the actual… More > Graphic Abstract

Zediao Chen, Feng Liu^*

CMES-Computer Modeling in Engineering & Sciences, Vol.139, No.2, pp. 2215-2236, 2024, DOI:10.32604/cmes.2023.046618

Abstract Crack propagation in brittle material is not only crucial for structural safety evaluation, but also has a wide-ranging impact on material design, damage assessment, resource extraction, and scientific research. A thorough investigation into the behavior of crack propagation contributes to a better understanding and control of the properties of brittle materials, thereby enhancing the reliability and safety of both materials and structures. As an implicit discrete element method, the Discontinuous Deformation Analysis (DDA) has gained significant attention for its developments and applications in recent years. Among these developments, the particle DDA equipped with the bonded particle model is a powerful… More >

Yu Cheng^1,2,5, Yajun Huang³, Shuai Li⁴, Zhongbin Zhou⁵, Xiaohui Yuan^1,2,*, Yanming Xu^5,*

CMES-Computer Modeling in Engineering & Sciences, Vol.139, No.2, pp. 1935-1960, 2024, DOI:10.32604/cmes.2023.045668

Abstract A new approach for flexoelectric material shape optimization is proposed in this study. In this work, a proxy model based on artificial neural network (ANN) is used to solve the parameter optimization and shape optimization problems. To improve the fitting ability of the neural network, we use the idea of pre-training to determine the structure of the neural network and combine different optimizers for training. The isogeometric analysis-finite element method (IGA-FEM) is used to discretize the flexural theoretical formulas and obtain samples, which helps ANN to build a proxy model from the model shape to the target value. The effectiveness… More >

Abidhan Bardhan^1,*, Raushan Kumar Singh², Mohammed Alatiyyah³, Sulaiman Abdullah Alateyah^4,*

CMES-Computer Modeling in Engineering & Sciences, Vol.139, No.2, pp. 1521-1555, 2024, DOI:10.32604/cmes.2023.044467

Abstract This research proposes a highly effective soft computing paradigm for estimating the compressive strength (CS) of metakaolin-contained cemented materials. The proposed approach is a combination of an enhanced grey wolf optimizer (EGWO) and an extreme learning machine (ELM). EGWO is an augmented form of the classic grey wolf optimizer (GWO). Compared to standard GWO, EGWO has a better hunting mechanism and produces an optimal performance. The EGWO was used to optimize the ELM structure and a hybrid model, ELM-EGWO, was built. To train and validate the proposed ELM-EGWO model, a sum of 361 experimental results featuring five influencing factors was… More >

Afraz Hussain Majeed¹, Rashid Mahmood², Sayed M. Eldin³, Imran Saddique^4,5,*, S. Saleem⁶, Muhammad Jawad⁷

CMES-Computer Modeling in Engineering & Sciences, Vol.139, No.2, pp. 1505-1519, 2024, DOI:10.32604/cmes.2023.030255

Abstract This study explains the entropy process of natural convective heating in the nanofluid-saturated cavity in a heated fin and magnetic field. The temperature is constant on the Y-shaped fin, insulating the top wall while the remaining walls remain cold. All walls are subject to impermeability and non-slip conditions. The mathematical modeling of the problem is demonstrated by the continuity, momentum, and energy equations incorporating the inclined magnetic field. For elucidating the flow characteristics Finite Element Method (FEM) is implemented using stable FE pair. A hybrid fine mesh is used for discretizing the domain. Velocity and thermal plots concerning parameters are… More >

Ali Akbar Firoozi^1,*, Ali Asghar Firoozi²

Structural Durability & Health Monitoring, Vol.18, No.1, pp. 1-18, 2024, DOI:10.32604/sdhm.2023.044573

Abstract The discipline of damage tolerance assessment has experienced significant advancements due to the emergence of smart materials and self-repairable structures. This review offers a comprehensive look into both traditional and innovative methodologies employed in damage tolerance assessment. After a detailed exploration of damage tolerance concepts and their historical progression, the review juxtaposes the proven techniques of damage assessment with the cutting-edge innovations brought about by smart materials and self-repairable structures. The subsequent sections delve into the synergistic integration of smart materials with self-repairable structures, marking a pivotal stride in damage tolerance by establishing an autonomous system for immediate damage identification… More >

Yaxun Liu^1,2, Lisheng Liu^1,2,*, Hai Mei^1,2, Qiwen Liu^1,2, Xin Lai^1,2

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.4, pp. 1-1, 2023, DOI:10.32604/icces.2023.09007

Abstract As a mathematical expression of the dynamic mechanical behavior, the constitutive model plays an indispensable role in numerical simulations of ceramic materials. The current bond-based peridynamic constitutive models can accurately describe the dynamic mechanical behavior of partial ceramic materials under impact loading, however, the predicted value of the Poisson’s ratio is 0.25, which is not true for most of the known ceramic materials. Herein, based on the existing bond-based peridynamic constitutive model, the current study utilizes the description of tangential bond force and considers the influence of bond force on rotation to accurately predict the Poisson's ratio of different types… More >

Kun Cai^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.27, No.3, pp. 1-2, 2023, DOI:10.32604/icces.2023.09777

Abstract Rotary nanomotor, as the essential component of a dynamic nanomachine, can output rotation via its rotor. So far, several techniques e.g., electric-, nanofluid-, laser-, chemical-, and thermally-driven models, have been proposed to actuate a rotary nanomotor,. Among the techniques, the thermally-driven rotary nanomotor (TDRM) models are the simplest technique that does not require an accurate external field as into energy. The model says that the thermal vibration of the atoms in the nanomotor can transmitted into rotationally kinetic energy via a rotor. Cai et al. [1] discovered the TDRM when relaxing double-walled carbon nanotubes (CNTs) at an NVT ensemble. Soon… More >