Doaa Sami Khafaga¹, Amel Ali Alhussan^1,*, El-Sayed M. El-kenawy^2,3, Abdelhameed Ibrahim⁴, Said H. Abd Elkhalik³, Shady Y. El-Mashad⁵, Abdelaziz A. Abdelhamid^6,7

CMC-Computers, Materials & Continua, Vol.73, No.1, pp. 865-881, 2022, DOI:10.32604/cmc.2022.028550

Abstract The design of an antenna requires a careful selection of its parameters to retain the desired performance. However, this task is time-consuming when the traditional approaches are employed, which represents a significant challenge. On the other hand, machine learning presents an effective solution to this challenge through a set of regression models that can robustly assist antenna designers to find out the best set of design parameters to achieve the intended performance. In this paper, we propose a novel approach for accurately predicting the bandwidth of metamaterial antenna. The proposed approach is based on employing the recently emerged guided whale… More >

Sunday Adeola Ajagbe¹, Mayowa O. Oyediran², Anand Nayyar^3,*, Jinmisayo A. Awokola⁴, Jehad F. Al-Amri⁵

CMC-Computers, Materials & Continua, Vol.73, No.1, pp. 1943-1959, 2022, DOI:10.32604/cmc.2022.028331

Abstract Cloud computing is a collection of disparate resources or services, a web of massive infrastructures, which is aimed at achieving maximum utilization with higher availability at a minimized cost. One of the most attractive applications for cloud computing is the concept of distributed information processing. Security, privacy, energy saving, reliability and load balancing are the major challenges facing cloud computing and most information technology innovations. Load balancing is the process of redistributing workload among all nodes in a network; to improve resource utilization and job response time, while avoiding overloading some nodes when other nodes are underloaded or idle is… More >

Adel Hamdan Mohammad^1,*, Tariq Alwada’n², Omar Almomani³, Sami Smadi³, Nidhal ElOmari⁴

CMC-Computers, Materials & Continua, Vol.73, No.1, pp. 133-150, 2022, DOI:10.32604/cmc.2022.027475

Abstract Intrusion detection is a serious and complex problem. Undoubtedly due to a large number of attacks around the world, the concept of intrusion detection has become very important. This research proposes a multilayer bio-inspired feature selection model for intrusion detection using an optimized genetic algorithm. Furthermore, the proposed multilayer model consists of two layers (layers 1 and 2). At layer 1, three algorithms are used for the feature selection. The algorithms used are Particle Swarm Optimization (PSO), Grey Wolf Optimization (GWO), and Firefly Optimization Algorithm (FFA). At the end of layer 1, a priority value will be assigned for each… More >

S. Lakshmi Narayanan^*

Computer Systems Science and Engineering, Vol.43, No.3, pp. 931-946, 2022, DOI:10.32604/csse.2022.022459

Abstract The main aim of this work is to improve the security of data hiding for secret image sharing. The privacy and security of digital information have become a primary concern nowadays due to the enormous usage of digital technology. The security and the privacy of users’ images are ensured through reversible data hiding techniques. The efficiency of the existing data hiding techniques did not provide optimum performance with multiple end nodes. These issues are solved by using Separable Data Hiding and Adaptive Particle Swarm Optimization (SDHAPSO) algorithm to attain optimal performance. Image encryption, data embedding, data extraction/image recovery are the… More >

Alaa Khalid Alduraibi^*

Intelligent Automation & Soft Computing, Vol.34, No.2, pp. 1295-1309, 2022, DOI:10.32604/iasc.2022.026601

Abstract With technological advancements, deep machine learning can assist doctors in identifying the brain mass or tumor using magnetic resonance imaging (MRI). This work extracts the deep features from 18-pre-trained convolutional neural networks (CNNs) to train the classical classifiers to categorize the brain MRI images. As a result, DenseNet-201, EfficientNet-b0, and DarkNet-53 deep features trained support vector machine (SVM) model shows the best accuracy. Furthermore, the ReliefF method is applied to extract the best features. Then, the fitness function is defined to select the number of nearest neighbors of ReliefF algorithm and feature vector size. Finally, the particle swarm optimization algorithm… More >

M. Manicka Raja^1,*, S. Manoj Kumar²

Intelligent Automation & Soft Computing, Vol.34, No.2, pp. 1017-1032, 2022, DOI:10.32604/iasc.2022.025665

Abstract Privacy of data in Internet of Things (IoT) over fog networks is the biggest challenge in security of Wireless communication networks. In Wireless Sensor Network (WSN), current research on fog computing with IoT is gaining popularity among IoT devices over network. Moreover, the data aggregation will reduce the energy consumption in WSN. Due to the open and hostile nature of WSN, secure data aggregation is the major issue. The existing data aggregation methods in IoT and its associated approaches are lack of limited aggregation functions, heavyweight, issues related to the performance overhead. Besides, the overload on fog node will result… More >

M. Nisha^1,*, M. Germin Nisha²

Intelligent Automation & Soft Computing, Vol.34, No.2, pp. 1399-1413, 2022, DOI:10.32604/iasc.2022.024482

Abstract A new methodology is used in this paper, for the optimal tuning of Photovoltaic (PV) by integrating the hybrid Maximum Power Point Tracking (MPPT) algorithms is proposed. The suggested hybrid MPPT algorithms can raise the performance of PV systems under partial shade conditions. It attempts to address the primary research issues in partial shading conditions in PV systems caused by clouds, trees, dirt, and dust. The proposed system computes MPPT utilizing an innovative adaptive model-based approach. In order to manage the input voltage at the Maximum PowerPoint, the MPPT algorithm changes the duty cycle of the switch in the DC-DC… More >

K. Prathibanandhi^1,*, R. Ramesh², C. Yaashuwanth³

Intelligent Automation & Soft Computing, Vol.34, No.1, pp. 543-557, 2022, DOI:10.32604/iasc.2022.025860

Abstract The delivery of combined benefits of Alternating Current (AC) motor and Direct Current (DC) Motor makes the Brushless Direct Current (BLDC) motors as a unique feature in numerous industrial applications. The possibilities of running the motor at very high speed with extensive operating life span of BLDC with miniature and its compact design make it an un-ignorable option for Electrical Engineers. With many advantages, till managing as well as controlling the speed of BLDC is complicated. This work is intended to come up with an effective control of speed of the motor through Torque Ripple Minimization Route and an Enhanced-Fractional… More >

S. K. Janarthanan^*, C. Kathirvel

Intelligent Automation & Soft Computing, Vol.34, No.1, pp. 33-50, 2022, DOI:10.32604/iasc.2022.023165

Abstract Renewable energy-based power generation, particularly photovoltaic (PV)-connected grid systems, has gained popularity in recent years due to its widespread adoption for residential and commercial customers of all sizes, from kilowatt (KW) to megawatt (MW). The purpose of this work is to demonstrate how an efficient CUK-integrated boost converter with continuous current flow may be used to maximise the output of solar arrays. The constant voltage at the converter output is maintained with increased dynamic performance using a Proportional Integral (PI) controller based on a hybrid optimization technique GWO-PSO (Grey Wolf Optimization-Particle Swarm Optimization). This hybrid solution permits accurate and speedy… More >

Yasar Nishat¹, Mohammad Danish^1,*, Heba I. Mohamed^2,*, Hisamuddin Shaikh¹, Abeer Elhakem³

Phyton-International Journal of Experimental Botany, Vol.91, No.8, pp. 1757-1777, 2022, DOI:10.32604/phyton.2022.021267

Abstract Meloidogyne incognita is a plant pathogen causing root-knot disease and loss of crop yield. The present study aimed to use Trichoderma harzianum as a biocontrol agent against plant-parasitic nematodes and used press mud, which is a solid waste by-product of sugarcane, as a biocontrol agent and biofertilizer. Therefore, the combined application of T. harzianum and press mud may enhance nematode control and plant growth. Elemental analysis of press mud using scanning electron microscopy (SEM) integrated with an Energy Dispersive X-ray (EDX) analyzer revealed the presence of different elements such as C, O, Mg, Si, P, K, Ca, Cu and Zn.… More >