Morris Kayitare^1,2,*, Gace Athanase Dalson^2,3, Al-Mas Sendegeyad⁴

Energy Engineering, Vol.120, No.9, pp. 2155-2175, 2023, DOI:10.32604/ee.2023.028559

Abstract Standalone Solar PV systems have been vital in the improvement of access to energy in many countries. However, given the large cost of solar PV plants’ components, in developing countries, there is a dear need for such components to be subsidised and incentivised for the consumers to afford the produced energy. Moreover, there is a need for optimal sizing of the solar PV plants taking into account the solar information, energy requirement for various activities, and economic conditions in the off-grid regions in Rwanda. This study aims to develop optimally sized solar PV plants suited to rural communities in Rwanda.… More > Graphic Abstract

B. Jegajothi^1,*, Sundaram Arumugam², Neeraj Kumar Shukla³, I. Kathir⁴, P. Yamunaa⁵, Monia Digra⁶

Computer Systems Science and Engineering, Vol.47, No.2, pp. 2417-2437, 2023, DOI:10.32604/csse.2023.038074

Abstract Renewable energy sources like solar, wind, and hydro are becoming increasingly popular due to the fewer negative impacts they have on the environment. Because, Since the production of renewable energy sources is still in the process of being created, photovoltaic (PV) systems are commonly utilized for installation situations that are acceptable, clean, and simple. This study presents an adaptive artificial intelligence approach that can be used for maximum power point tracking (MPPT) in solar systems with the help of an embedded controller. The adaptive method incorporates both the Whale Optimization Algorithm (WOA) and the Artificial Neural Network (ANN). The WOA… More >

Nur Fairuz Mohamed Yusof¹, Dahaman Ishak², Muhammad Ammirrul Atiqi Mohd Zainuri^3,*, Muhammad Najwan Hamidi², Zuhair Muhammed Alaas⁴, Mohamed Mostafa Ramadan Ahmed⁵

Intelligent Automation & Soft Computing, Vol.37, No.2, pp. 2441-2457, 2023, DOI:10.32604/iasc.2023.037778

Abstract Grid-connected reactive-load compensation and harmonic control are becoming a central topic as photovoltaic (PV) grid-connected systems diversified. This research aims to produce a high-performance inverter with a fast dynamic response for accurate reference tracking and a low total harmonic distortion (THD) even under nonlinear load applications by improving its control scheme. The proposed system is expected to operate in both stand-alone mode and grid-connected mode. In stand-alone mode, the proposed controller supplies power to critical loads, alternatively during grid-connected mode provide excess energy to the utility. A modified variable step incremental conductance (VS-InCond) algorithm is designed to extract maximum power… More >

Adnan Hasan Bdair Aighuraibawi^1,2, Selvakumar Manickam^1,*, Rosni Abdullah³, Zaid Abdi Alkareem Alyasseri^4,5, Ayman Khallel⁶, Dilovan Asaad Zebari⁹, Hussam Mohammed Jasim⁷, Mazin Mohammed Abed⁸, Zainb Hussein Arif⁷

Computer Systems Science and Engineering, Vol.47, No.1, pp. 553-574, 2023, DOI:10.32604/csse.2023.037948

Abstract Internet Protocol version 6 (IPv6) is the latest version of IP that goal to host 3.4 × 10³⁸ unique IP addresses of devices in the network. IPv6 has introduced new features like Neighbour Discovery Protocol (NDP) and Address Auto-configuration Scheme. IPv6 needed several protocols like the Address Auto-configuration Scheme and Internet Control Message Protocol (ICMPv6). IPv6 is vulnerable to numerous attacks like Denial of Service (DoS) and Distributed Denial of Service (DDoS) which is one of the most dangerous attacks executed through ICMPv6 messages that impose security and financial implications. Therefore, an Intrusion Detection System (IDS) is a monitoring system… More >

Qinghua Lao^1,#, Hui Zhang^1,#, Zhihong Wang², Puyou Jia³, Yongquan Li^1,*, Qiaoguang Li^4,*

Journal of Renewable Materials, Vol.11, No.7, pp. 3025-3041, 2023, DOI:10.32604/jrm.2023.026646

Abstract In this study, as the plasticizer, Camellia oleifera seed-oil-based cyclohexyl ester (COSOCE) was prepared by the reaction of cyclohexene oxide and refined C. oleifera seed oil (RCOSO) obtained by acidification hydrolysis after saponification. In addition, the structure of the target product was confirmed by Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, and Raman spectroscopy. COSOCE was used as plasticizer-modified polyvinyl chloride (PVC) membranes. The structure of the COSOCE-modified PVC membranes were characterized by Raman spectroscopy and scanning electron microscopy (SEM). The properties of the COSOCE-modified PVC membrane were characterized by contact angle measurements, universal testing machine, thermogravimetric… More >

Hussien Aziz Sahe^b,*, Ala'a Abbas Mahdi, Qusay Rasheed Al-amir

Frontiers in Heat and Mass Transfer, Vol.16, pp. 1-15, 2021, DOI:10.5098/hmt.16.9

Abstract In this study, indoor air quality and thermal comfort were investigated for two persons sitting inside an office room of dimensions (3×2.5×2.5m). The office room is equipped with personal ventilation systems positioned 50 cm from the person's face. These systems are characterized by the ability to change the rates of airflow (ATD). Experimental studies and results were conducted on a thermal manikin that simulates the human body in a sitting position, and the results are compared with CFD analysis using the k-epsilon and the RNG turbulent models. The experimental study focused on measuring the speed and temperature of the air… More >

Fuyin Ni^1,2, Kai Li^2,*

Energy Engineering, Vol.120, No.5, pp. 1203-1221, 2023, DOI:10.32604/ee.2023.025796

Abstract Unified power quality conditioner (UPQC) with energy storage is commonly based on conventional capacity configuration strategy with power angle control. It has problems such as phase jumping before and after compensation. DC-link cannot continuously emit active power externally. Therefore, this paper presents the compensation strategy of full load voltage magnitude and phase in capacity configuration of UPQC. The topology of UPQC is integrated a series active power filter (SAPF), a shunt active power filter (PAPF) and a photovoltaic-battery energy storage system (PV-BESS). The principle of full load voltage compensation is analyzed based on the PV-BESS-UPQC topology. The magnitude constant of… More > Graphic Abstract

Zhenguo Wang, Lenan Wang, Yejing Meng^*, Yong Wen, Jianzhong Pei

Journal of Renewable Materials, Vol.11, No.5, pp. 2469-2489, 2023, DOI:10.32604/jrm.2023.025497

Abstract In the field of roads, due to the effect of vehicle loads, piezoelectric materials under the road surface can convert mechanical vibration into electrical energy, which can be further used in road facilities such as traffic signals and street lamps. The barium titanate/polyvinylidene fluoride (BaTiO₃/PVDF) composite, the most common hybrid ceramic-polymer system, was widely used in various fields because the composite combines the good dielectric property of ceramic materials with the good flexibility of PVDF material. Previous studies have found that conductive particles can further improve the dielectric and piezoelectric properties of other composites. However, few studies have investigated the… More >

Abdellah Asbayou^*, Ahmed Ihlal, Ismail Isknan, Ahmed Soussi, Lahoussine Bouhouch

Journal of Renewable Materials, Vol.11, No.5, pp. 2249-2264, 2023, DOI:10.32604/jrm.2023.025456

Abstract Experiments of soiling effects on the performances of a PV panel have been performed using dust collected from two sites in the region of Agadir-Morocco. The optical transmittance of the front glass was found to depend on the nature and density of dust. The nature of dust was studied by means of scanning electron microscopy and energy dispersive x-ray spectroscopy. It was found that the granulometry of dust particles depends on the study area. For a dust density of around 20 g/m², the maximum power Pmax of the solar panel decreases drastically from 30 to 20 W for the (HP)… More > Graphic Abstract

Ahmed Mohamed Ragab^1,*, Abdelhalim Abdelnaby Zekry², Ashraf Yahia Hassan¹

Energy Engineering, Vol.120, No.4, pp. 885-910, 2023, DOI:10.32604/ee.2023.026425

Abstract Accurate PV system simulators are implemented with expensive software platforms using paid irradiance data. The main purpose of this paper is to develop and validate a PV system simulator, beginning with a solar cell parameter extraction model, then test and validate long-term Irradiance data using free online source (Typical Meteorological Year TMY in (PVGIS) European website), and finally building full solar generator simulator to run in working real conditions. Comparing results with Accurate Paid PV simulators (which use the Muneer model) showed good accuracy of the proposed simulator. Work flow starts with the Irradiance model’s data processing, then solar cell… More >