Yong Chen¹, Chao Xu^1,*, Jing Selena He², Sheng Xiao³, Fanfan Shen¹

CMC-Computers, Materials & Continua, Vol.72, No.3, pp. 5251-5272, 2022, DOI:10.32604/cmc.2022.026750

Abstract With the continuous expansion of software applications, people's requirements for software quality are increasing. Software defect prediction is an important technology to improve software quality. It often encodes the software into several features and applies the machine learning method to build defect prediction classifiers, which can estimate the software areas is clean or buggy. However, the current encoding methods are mainly based on the traditional manual features or the AST of source code. Traditional manual features are difficult to reflect the deep semantics of programs, and there is a lot of noise information in AST, which affects the expression of… More >

Aashish Kumar¹, Darpan Anand¹, Sudan Jha², Gyanendra Prasad Joshi³, Woong Cho^4,*

CMC-Computers, Materials & Continua, Vol.72, No.1, pp. 1409-1426, 2022, DOI:10.32604/cmc.2022.024970

Abstract Software-defined networking is one of the progressive and prominent innovations in Information and Communications Technology. It mitigates the issues that our conventional network was experiencing. However, traffic data generated by various applications is increasing day by day. In addition, as an organization's digital transformation is accelerated, the amount of information to be processed inside the organization has increased explosively. It might be possible that a Software-Defined Network becomes a bottleneck and unavailable. Various models have been proposed in the literature to balance the load. However, most of the works consider only limited parameters and do not consider controller and transmission… More >

Manar Ahmed Hamza^1,*, Abdelzahir Abdelmaboud², Souad Larabi-Marie-Sainte³, Haya Mesfer Alshahrani⁴, Mesfer Al Duhayyim⁵, Hamza Awad Ibrahim⁶, Mohammed Rizwanullah¹, Ishfaq Yaseen¹

CMC-Computers, Materials & Continua, Vol.72, No.1, pp. 1951-1965, 2022, DOI:10.32604/cmc.2022.024692

Abstract Generally, software testing is considered as a proficient technique to achieve improvement in quality and reliability of the software. But, the quality of test cases has a considerable influence on fault revealing capability of software testing activity. Test Case Prioritization (TCP) remains a challenging issue since prioritizing test cases is unsatisfactory in terms of Average Percentage of Faults Detected (APFD) and time spent upon execution results. TCP is mainly intended to design a collection of test cases that can accomplish early optimization using preferred characteristics. The studies conducted earlier focused on prioritizing the available test cases in accelerating fault detection… More >

Waqar Mehmood¹, Abdul Waheed Khan², Waqar Aslam³, Shafiq Ahmad⁴, Ahmed M. El-Sherbeeny⁴, Muhammad Shafiq^5,*

Intelligent Automation & Soft Computing, Vol.32, No.1, pp. 441-454, 2022, DOI:10.32604/iasc.2022.016116

Abstract Software Configuration Management (SCM) aims to control the development of complex software systems. Traditional SCM systems treat text files as central artifacts, so they are mainly developed for source code. Such a system is not suitable for model-based software development with model-centric artifacts. When applying traditional systems to model-based software development, new challenges such as model mapping, differentiation, and merging arise. Many existing methods mainly use UML or domain-specific languages to determine model differences. However, as far as we know, there is no such technology for System Modeling Language (SysML) models. SysML covers the entire development life cycle of various… More >

Komeil Raisian¹, Jamaiah Yahaya^2,*, Aziz Deraman³

Computer Systems Science and Engineering, Vol.41, No.1, pp. 271-288, 2022, DOI:10.32604/csse.2022.020496

Abstract Software is a central component in the modern world and vastly affects the environment’s sustainability. The demand for energy and resource requirements is rising when producing hardware and software units. Literature study reveals that many studies focused on green hardware; however, limited efforts were made in the greenness of software products. Green software products are necessary to solve the issues and problems related to the long-term use of software, especially from a sustainability perspective. Without a proper mechanism for measuring the greenness of a particular software product executed in a specific environment, the mentioned benefits will not be attained. Currently,… More >

Nancy Abbas El-Hefnawy^1,*, Osama Abdel Raouf², Heba Askr³

CMC-Computers, Materials & Continua, Vol.70, No.1, pp. 1349-1362, 2022, DOI:10.32604/cmc.2022.017787

Abstract Time and space complexity is the most critical problem of the current routing optimization algorithms for Software Defined Networking (SDN). To overcome this complexity, researchers use meta-heuristic techniques inside the routing optimization algorithms in the OpenFlow (OF) based large scale SDNs. This paper proposes a hybrid meta-heuristic algorithm to optimize the dynamic routing problem for the large scale SDNs. Due to the dynamic nature of SDNs, the proposed algorithm uses a mutation operator to overcome the memory-based problem of the ant colony algorithm. Besides, it uses the box-covering method and the k-means clustering method to divide the SDN network to… More >

Bushra Mumtaz¹, Summrina Kanwal^2,*, Sultan Alamri², Faiza Khan¹

Intelligent Automation & Soft Computing, Vol.29, No.3, pp. 669-684, 2021, DOI:10.32604/iasc.2021.018405

Abstract Software Defect Prediction (SDP) is a dynamic research field in the software industry. A quality software product results in customer satisfaction. However, the higher the number of user requirements, the more complex will be the software, with a correspondingly higher probability of failure. SDP is a challenging task requiring smart algorithms that can estimate the quality of a software component before it is handed over to the end-user. In this paper, we propose a hybrid approach to address this particular issue. Our approach combines the feature selection capability of the Optimized Artificial Immune Networks (Opt-aiNet) algorithm with benchmark machine-learning classifiers… More >

Muhammad Reazul Haque¹, Saw Chin Tan¹, Zulfadzli Yusoff^2,*, Kashif Nisar^3,5,6, Lee Ching Kwang^2,7, Rizaludin Kaspin⁴, Bhawani Shankar Chowdhry⁵, Rajkumar Buyya⁸, Satya Prasad Majumder⁹, Manoj Gupta¹⁰, Shuaib Memon¹¹

CMC-Computers, Materials & Continua, Vol.68, No.3, pp. 3147-3165, 2021, DOI:10.32604/cmc.2021.016591

Abstract In software-defined networks (SDNs), controller placement is a critical factor in the design and planning for the future Internet of Things (IoT), telecommunication, and satellite communication systems. Existing research has concentrated largely on factors such as reliability, latency, controller capacity, propagation delay, and energy consumption. However, SDNs are vulnerable to distributed denial of service (DDoS) attacks that interfere with legitimate use of the network. The ever-increasing frequency of DDoS attacks has made it necessary to consider them in network design, especially in critical applications such as military, health care, and financial services networks requiring high availability. We propose a mathematical… More >

Qiang Zhi^1,*, Shuji Morisaki²

Computer Systems Science and Engineering, Vol.37, No.3, pp. 443-461, 2021, DOI:10.32604/csse.2021.015157

Abstract A software requirements specification (SRS) is a detailed description of a software system to be developed. This paper proposes and evaluates a lightweight review approach called value-oriented review (VOR) to detect defects in SRS. This approach comprises setting core values based on SRS and detecting the defects disturbing the core values. To evaluate the effectiveness of the proposed approach, we conducted a controlled experiment to investigate whether reviewers could identify and record the core values based on SRS and find defects disturbing the core values. Results of the evaluation with 56 software engineers showed that 91% of the reviewers identified… More >

Nana Zhang¹, Kun Zhu¹, Shi Ying^{1, *}, Xu Wang²

CMC-Computers, Materials & Continua, Vol.64, No.1, pp. 471-499, 2020, DOI:10.32604/cmc.2020.010117

Abstract Software defect prediction is a research hotspot in the field of software engineering. However, due to the limitations of current machine learning algorithms, we can’t achieve good effect for defect prediction by only using machine learning algorithms. In previous studies, some researchers used extreme learning machine (ELM) to conduct defect prediction. However, the initial weights and biases of the ELM are determined randomly, which reduces the prediction performance of ELM. Motivated by the idea of search based software engineering, we propose a novel software defect prediction model named KAEA based on kernel principal component analysis (KPCA), adaptive genetic algorithm, extreme… More >