Giacomo Landi¹, Surya R. Kalidindi²

CMC-Computers, Materials & Continua, Vol.16, No.3, pp. 273-294, 2010, DOI:10.3970/cmc.2010.016.273

Abstract In this paper, we present a computationally efficient multi-scale framework for predicting the local fields in the representative volume element of a multiphase material system subjected to thermo-mechanical loading conditions. This framework for localization relationships is a natural extension of our recent work on two-phase composites subjected to purely mechanical loading. In this novel approach, the localization relationships take on a simple structure expressed as a series sum, where each term in the series is a convolution product of local structure and the governing physics expressed in the form of influence coefficients. Another salient feature of this approach is its… More >

W. F. Yuan^1,2, H. B. Zhang¹

CMC-Computers, Materials & Continua, Vol.16, No.2, pp. 117-126, 2010, DOI:10.3970/cmc.2010.016.117

Abstract Corrosion pits on a steel plate can reduce the strength of the plate. However, it is difficult to calculate the corrosion effect analytically since the pits are normally distributed on the plate's surface randomly. In this manuscript, a simple approach is proposed to convert the corroded plate into a perfect one. By this method, the corrosion pits are treated as inclusions embedded in the plate. Then the analytical mechanics model used for composite material can be adopted in the calculation of the steel plate's effective material properties. To verify the proposed approach, numerical simulation is conducted using finite element method. More >

J. Zidek¹ , J. Kucera¹, J. Jancar¹

CMC-Computers, Materials & Continua, Vol.16, No.1, pp. 51-74, 2010, DOI:10.3970/cmc.2010.016.051

Abstract It has been shown that in particulate filled composites, a cross-property relationship exists between various transport properties (e.g., electrical conductivity, mechanical reinforcement, gas permeation) of a macroscale composite. Thus, knowledge of the effective mechanical properties of a composite immediately places bounds on its electrical conductivity or gas permeation behavior. Using these bounds allows us to predict the phase dispersion state that optimizes one or multiple properties of the composite and, thus, the knowledge of how spatial arrangement of filler particles at their given content affects physical properties of the composite can be valuable. In this paper, a new numerical model… More >

Dustin D. Gerrard¹, David T. Fullwood¹, Denise M. Halverson², Stephen R. Niezgoda³

CMC-Computers, Materials & Continua, Vol.15, No.2, pp. 129-152, 2010, DOI:10.3970/cmc.2010.015.129

Abstract The effective properties of composite materials are often strongly related to the connectivity of the material components. Many structure metrics, and related homogenization theories, do not effectively account for this connectivity. In this paper, relationships between the topology, represented via homology theory, and the effective elastic response of composite plates is investigated. The study is presented in the context of popular structure metrics such as percolation theory and correlation functions. More >

C.M. Hefferan¹, S.F. Li¹, J. Lind¹, U. Lienert², A.D. Rollett³, P. Wynblatt³, R.M. Suter^1,3

CMC-Computers, Materials & Continua, Vol.14, No.3, pp. 209-220, 2009, DOI:10.3970/cmc.2009.014.209

Abstract We have measured and reconstructed via forward modeling a small volume of microstructure of high purity, well annealed nickel using high energy x-ray diffraction microscopy (HEDM). Statistical distributions characterizing grain orientations, intra-granular misorientations, and nearest neighbor grain misorientations are extracted. Results are consistent with recent electron backscatter diffraction measurements. Peaks in the grain neighbor misorientation angle distribution at 60 degrees (∑3) and 39 degrees (∑9) have resolution limited widths of ≈ 0.14 degree FWHM. The analysis demonstrates that HEDM can recover grain and grain boundary statistics comparable to OIM volume measurements; more extensive data sets will lead to full, five… More >

Brent L. Adams, Joshua Kacher

CMC-Computers, Materials & Continua, Vol.14, No.3, pp. 185-196, 2009, DOI:10.3970/cmc.2009.014.185

Abstract Consideration is given to the resolution of dislocation density afforded by EBSD-based scanning electron microscopy. Comparison between the conventional Hough- and the emerging high-resolution cross-correlation-based approaches is made. It is illustrated that considerable care must be exercised in selecting a step size (Burger's circuit size) for experimental measurements. Important variables affecting this selection include the dislocation density and the physical size and density of dislocation dipole and multi-pole components of the structure. It is also illustrated that simulations can be useful to the interpretation of experimental recoveries. More >

S.Ahmadi¹, B.L.Adams¹ , D.T.Fullwood¹

CMC-Computers, Materials & Continua, Vol.14, No.2, pp. 141-170, 2009, DOI:10.3970/cmc.2009.014.141

Abstract In this paper, a model is introduced to examine the evolution of the microstructure function under plastic deformations. This model is based upon a double continuity relationship that conserves both material particles in the mass space and orientations in the orientation space. An Eulerian description of the motion of material particles and orientations is considered, and continuity relations are derived for both spaces. To show how the proposed model works, two different case studies are provided. In the mass space, the continuity relation is used to examine the evolution of the microstructure function of a two-phase (isotropic) material; while, in… More >

Xiaohua Hu¹, Gordana A. Cingara¹, David S. Wilkinson¹, Mukesh Jain², PeidongWu², Raja K. Mishra³

CMC-Computers, Materials & Continua, Vol.14, No.2, pp. 99-124, 2009, DOI:10.3970/cmc.2009.014.099

Abstract This work aims to understand the texture distribution in the localized necking band formed during uni-axial tension of AA5754 using an edge-constrained, plane strain post-necking FE model. The model domain is a long cross section of the band. Initial grain structure is mapped into the mesh from EBSD data using a modified Voroni-cell interpolation and considering pre-straining prior to localized necking. The material points in grains are assumed to exhibit isotropic elastoplastic behavior but have a relative strength in terms of Taylor factors which are updated by a Taylor-Bishop-Hill model. The predicted textures and gradients within the localized necking band… More >

Stephen R. Niezgoda¹, Surya R. Kalidindi^1,2

CMC-Computers, Materials & Continua, Vol.14, No.2, pp. 79-98, 2009, DOI:10.3970/cmc.2009.014.079

Abstract The generalized Hough transform is a common technique for feature detection in image processing. In this paper, we develop a size invariant Hough framework for the detection of arbitrary shapes in three dimensional digital microstructure datasets. The Hough transform is efficiently implemented via kernel convolution with complex Hough filters, where shape is captured in the magnitude of the filter and scale in the complex phase. In this paper, we further generalize the concept of a Hough filter by encoding other parameters of interest (e.g. orientation of plate or fiber constituents) in the complex phase, broadening the applicability of Hough transform… More >

Ming-Hsiao Lee, Wen-Hwa Chen

CMC-Computers, Materials & Continua, Vol.11, No.1, pp. 59-78, 2009, DOI:10.3970/cmc.2009.011.059

Abstract On the analysis of electrostatic-structural coupled problems as encountered in many electrostatic driven MEMS devices, the electrostatic analysis domain is often extremely distorted due to the deflection of the structure. This kind of problem is difficult to be dealt with by almost all kinds of available numerical methods. A new three-dimensional meshless scheme with background grid is thus proposed herein. By this scheme, a three-dimensional fixed background grid with regularly-distributed nodes is utilized. Another set of discretized boundary grid is employed to describe the boundary surfaces of both the structure and the electrostatic field. The analysis electrostatic/structural domains are modeled… More >