Sawsan Dacrory^1*, Hussein Abou-Yousef¹, Ragab E. Abou-Zeid¹, Samir Kamel¹, Mohamed S. Abdel-Aziz², Mohamed Elbadry³

Journal of Renewable Materials, Vol.6, No.5, pp. 536-547, 2018, DOI:10.7569/JRM.2017.634190

Abstract Carboxymethyl cellulose hydrogels were developed through crosslinking process using eco-friendly crosslinkers such as maleic, succinic, and citric acids. Carboxymethyl cellulose was prepared from the cellulosic fraction of olive industry residues. A series of hydrogels with varying crosslinker acid concentrations, reaction times, and reaction temperatures was produced to study the swelling capacities and gel fraction of the obtained hydrogels. Additional study pertains to the preparation of antimicrobial nanocomposite hydrogels through in-situ incorporation of the silver nanoparticles during the crosslinking reaction. Silver nanoparticles were prepared by reduction of AgNO3with leaves of Ricinus communis. The particle size of prepared silver nanoparticles was detected… More >

Kunal Wazarkar, Anagha Sabnis*

Journal of Renewable Materials, Vol.6, No.5, pp. 517-528, 2018, DOI:10.7569/JRM.2017.634181

Abstract This research work discloses the preparation of polyurethane coatings from cardanol modified using thiolene chemistry, wherein unsaturated long alkyl chain of cardanol was successfully utilized via thiol-ene click reaction to synthesize polyol. For this purpose, cardanol and thioglycerol was reacted in the presence of Irgacure 184 (photoinitiator) and 1,8-Diazabicyclo[5.4.0]undec-7-ene (catalyst) and exposed to UV light for 12 h at 80 °C. One mole of thioglycerol was successfully added across the double bond of fatty chain of cardanol and confirmed by chemical and spectroscopic analysis. Further, the polyol thus prepared was cured with various polyisocyanates, viz., N-75 (HDI based), L-67/BA (TDI… More >

Kunal Wazarkar, Anagha Sabnis*

Journal of Renewable Materials, Vol.6, No.4, pp. 438-449, 2018, DOI:10.7569/JRM.2017.634159

Abstract The research work presented in this article deals with the synthesis of cardanol-based polyol and its curing with hexabutoxymethyl melamine (HBMM) for application in coatings. Cardanol-based polyol was prepared via thiol-ene click reaction using thioglycerol. Unsaturation present in the long chain of cardanol was successfully utilized to synthesize polyol via thiol-ene coupling. The reaction was carried out between cardanol and thioglycerol in the presence of Irgacure 184 (photoinitiator) and 1,8-Diazabicyclo[5.4.0]undec-7-ene (catalyst) under UV light for 12 h at 80 °C. After completion of the reaction, one mole of thioglycerol was successfully added across the double bond of a fatty chain… More >

David Azria^1,2, Raluca Guermache^1,2, Sophie Raisin¹, Sébastien Blanquer¹, Frédéric Gobeaux³, Marie Morille¹, Emmanuel Belamie^1,2,*

Journal of Renewable Materials, Vol.6, No.3, pp. 314-324, 2018, DOI:10.7569/JRM.2017.634186

Abstract Biopolymers extracted from renewable resources like chitosan and collagen exhibit interesting properties for the elaboration of materials designed for tissue engineering applications, among which are their hydrophilicity, biocompatibility and biodegradability. In many cases, functional recovery of an injured tissue or organ requires oriented cell outgrowth, which is particularly critical for nerve regeneration. Therefore, there is a growing interest for the elaboration of materials exhibiting functionalization gradients able to guide cells. Here, we explore an original way of elaborating such gradients by assembling particles from a library of functionalized microspheres. We propose a simple process to prepare chitosan-collagen hybrid microspheres by… More >

Dounia Bendahou^1,2, Abdelkader Bendahou¹, Bastien Seantier¹, Bénédicte Lebeau³, Yves Grohens^1,*, Hamid Kaddami^2,*

Journal of Renewable Materials, Vol.6, No.3, pp. 299-313, 2018, DOI:10.7569/JRM.2017.634185

Abstract Hybrid aerogels have been prepared by freeze-drying technique after mixing water dispersions of cellulose microfibers or cellulose nanofibers and silica (SiO2) of type SBA-15 (2D-hexagonal). The prepared composites were characterized by different analysis techniques such as SEM, hot-filament, DMA, etc. These composites are compared to those previously prepared using nanozeolites (NZs) as mineral charge. The morphology studied by SEM indicated that both systems have different structures, i.e., individual fibers for cellulose microfibers WP-based aerogels and films for nanofibrillated cellulose NFC-based ones.... These differences seem to be driven by the charge of the particles, their aspect ratio and concentrations. These hybrid… More >

Liliane Cruz Gomes de Souza Santos^1*, Eliane Ayres², Flávio Renato de Góes Padula¹

Journal of Renewable Materials, Vol.5, No.3-4, pp. 307-312, 2017, DOI:10.7569/JRM.2017.634121

Abstract In this study, bamboo powder and/or hollow glass microspheres were added to thermoplastic cassava starch in order to overcome its drawbacks. The composites were characterized by scanning electron microscopy (SEM), tensile testing, water contact angle measurement and X-ray diffractometry (XRD), in addition to their thermal properties. The mechanical strength of the composites showed a general decline with increasing bamboo powder content while the water contact angles increased up to 15% of bamboo powder content (% w/w dry starch). The addition of hollow glass microspheres provides an optimal balance between hydrophobicity and mechanical strength. The results pointed to improved properties that… More >

Elena Fortunati^1*, Francesca Luzi¹, Chiara Fanali², Laura Dugo², Maria Giovanna Belluomo², Luigi Torre¹, José Maria Kenny¹, Luca Santi³, Roberta Bernini³

Journal of Renewable Materials, Vol.5, No.2, pp. 81-95, 2017, DOI:10.7569/JRM.2016.634132

Abstract Hydroxytyrosol (HTyr), a biophenol found in extra-virgin olive oil or olive oil by-products, well known for its strong antioxidant activity, was used as active ingredient for poly(vinyl alcohol) (PVA) matrix to develop film formulations by solvent casting process. The effect of HTyr on the morphological, thermal stability, optical, mechanical and release properties of PVA were investigated, while water absorption capacity, migration with food stimulants, water vapor permeability and antioxidant properties were tested taking into account the final application as food packaging systems. Morphological investigations evidenced homogeneity of all PVA/HTyr films, while the presence of HTyr clearly accounted for an increase… More >

Oscar F. Aguilar Gutierrez, Alejandro D. Rey^*

Journal of Renewable Materials, Vol.4, No.4, pp. 241-250, 2016, DOI:10.7569/JRM.2016.634119

Abstract Biological plywoods are solid analogues of liquid crystalline phases whose building blocks, including cellulose, collagen and chitin, present multifunctionality, providing in some cases protection, camouflage, self-healing and/or adaptability to the surrounding environment. The 3D ordered structure is the main factor for these fascinating properties, and the assessment of the structure-property relationship will be a powerful tool in terms of future material design and innovation. Cross-section observations lead to characteristic patterns depending on the specific arrangement of the plywood’s building blocks. Twisted plywood architectures, known as the Bouligand structure, lead to the widely observed arced patterns which can be ideal or… More >

Shyamalima Sharma, Pronob Gogoi, Bhaskar Jyoti Saikia, Swapan K. Dolui^*

Journal of Renewable Materials, Vol.4, No.2, pp. 158-162, 2016, DOI:10.7569/JRM.2015.634116

Abstract Cadmium sulfi de (CdS) quantum dots (QDs) were synthesized by a standard hydrothermal method with simultaneous desulfurization of kerosene oil. Sulfur containing kerosene oil was treated with cadmium chloride (CdCl2) in the presence of sodium hydroxide (NaOH) at 120 °C for 1.5 to 5 h. CdS was formed and sulfur content of oil gradually decreased. Thus, desulfurization of the oil occurred with the formation of the CdS QDs. The concentration of sulfur decreased to a minimum of 0.055% after 5 h of the reaction. In addition, the particle size of QDs increased from 5.4 nm to 8.1 nm as the… More >

Dragomir Vassilev^1*, Nadezhda Petkova², Milena Koleva¹, Panteley Denev²

Journal of Renewable Materials, Vol.4, No.1, pp. 24-30, 2016, DOI:10.7569/JRM.2015.634125

Abstract This article presents the results obtained by the ultrasound-assisted synthesis of sucrose and fructooligosaccharides (FOS) esters with fatty acids (palmitic and 10-undecylenic), the identifi cation of the products and the study of their possible application as plasticizers in plastics processing. Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (¹H and ¹³C NMR) spectroscopy were used to identify the synthesized carbohydrate esters. The plasticizing effect of the sucrose palmitate applied in polyvinyl chloride (PVC) was evaluated by the glass transition temperatures; the decrease of the T_g with the increase of the ester content could be accepted as confi rmation of… More >