Xukai Ren^1,2,*, Huanwei Yu², Xianfeng Chen², Yantong Tang², Guobiao Wang^1,*, Xiyong Du²

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 647-663, 2024, DOI:10.32604/cmes.2024.048782

Abstract Stirred reactors are key equipment in production, and unpredictable failures will result in significant economic losses and safety issues. Therefore, it is necessary to monitor its health state. To achieve this goal, in this study, five states of the stirred reactor were firstly preset: normal, shaft bending, blade eccentricity, bearing wear, and bolt looseness. Vibration signals along x, y and z axes were collected and analyzed in both the time domain and frequency domain. Secondly, 93 statistical features were extracted and evaluated by ReliefF, Maximal Information Coefficient (MIC) and XGBoost. The above evaluation results were then fused by D-S evidence… More >

Yong Ma¹, Han Zhao², Kunyin Guo^3,*, Yunni Xia^3,*, Xu Wang⁴, Xianhua Niu⁵, Dongge Zhu⁶, Yumin Dong⁷

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 907-927, 2024, DOI:10.32604/cmes.2024.048759

Abstract Mobile Edge Computing (MEC) is a technology designed for the on-demand provisioning of computing and storage services, strategically positioned close to users. In the MEC environment, frequently accessed content can be deployed and cached on edge servers to optimize the efficiency of content delivery, ultimately enhancing the quality of the user experience. However, due to the typical placement of edge devices and nodes at the network’s periphery, these components may face various potential fault tolerance challenges, including network instability, device failures, and resource constraints. Considering the dynamic nature of MEC, making high-quality content caching decisions for real-time mobile applications, especially… More >

Jipeng Xie^1,2, Guolai Yang^1,*, Liqun Wang¹, Lei Li¹

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 793-819, 2024, DOI:10.32604/cmes.2024.048174

Abstract To enhance the comprehensive performance of artillery internal ballistics—encompassing power, accuracy, and service life—this study proposed a multi-stage multidisciplinary design optimization (MS-MDO) method. First, the comprehensive artillery internal ballistic dynamics (AIBD) model, based on propellant combustion, rotation band engraving, projectile axial motion, and rifling wear models, was established and validated. This model was systematically decomposed into subsystems from a system engineering perspective. The study then detailed the MS-MDO methodology, which included Stage I (MDO stage) employing an improved collaborative optimization method for consistent design variables, and Stage II (Performance Optimization) focusing on the independent optimization of local design variables and… More >

Guogang Gao¹, Lei Xu¹, Tianpeng Huang^2,*, Xuliang Zhao¹, Lihua Huang¹

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 305-323, 2024, DOI:10.32604/cmes.2024.047899

Abstract The Rotary Inverted Pendulum (RIP) is a widely used underactuated mechanical system in various applications such as bipedal robots and skyscraper stabilization where attitude control presents a significant challenge. Despite the implementation of various control strategies to maintain equilibrium, optimally tuning control gains to effectively mitigate uncertain nonlinearities in system dynamics remains elusive. Existing methods frequently rely on extensive experimental data or the designer’s expertise, presenting a notable drawback. This paper proposes a novel tracking control approach for RIP, utilizing a Linear Quadratic Regulator (LQR) in combination with a reduced-order observer. Initially, the RIP system is mathematically modeled using the… More >

Hasan J. Alyamani^*

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 1129-1142, 2024, DOI:10.32604/cmes.2024.047756

Abstract The evaluation of disease severity through endoscopy is pivotal in managing patients with ulcerative colitis, a condition with significant clinical implications. However, endoscopic assessment is susceptible to inherent variations, both within and between observers, compromising the reliability of individual evaluations. This study addresses this challenge by harnessing deep learning to develop a robust model capable of discerning discrete levels of endoscopic disease severity. To initiate this endeavor, a multi-faceted approach is embarked upon. The dataset is meticulously preprocessed, enhancing the quality and discriminative features of the images through contrast limited adaptive histogram equalization (CLAHE). A diverse array of data augmentation… More > Graphic Abstract

Tianyi Li^1,2, Xin Gu², Qing Zhang^2,*

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 339-361, 2024, DOI:10.32604/cmes.2024.047566

Abstract This study proposes a comprehensive, coupled thermomechanical model that replaces local spatial derivatives in classical differential thermomechanical equations with nonlocal integral forms derived from the peridynamic differential operator (PDDO), eliminating the need for calibration procedures. The model employs a multi-rate explicit time integration scheme to handle varying time scales in multi-physics systems. Through simulations conducted on granite and ceramic materials, this model demonstrates its effectiveness. It successfully simulates thermal damage behavior in granite arising from incompatible mineral expansion and accurately calculates thermal crack propagation in ceramic slabs during quenching. To account for material heterogeneity, the model utilizes the Shuffle algorithm… More >

Chengkan Xu^1,2,4, Xiaofei Wang³, Yixuan Li², Guannan Wang^2,*, He Zhang^2,4,*

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 957-974, 2024, DOI:10.32604/cmes.2024.047327

Abstract Structural damage in heterogeneous materials typically originates from microstructures where stress concentration occurs. Therefore, evaluating the magnitude and location of localized stress distributions within microstructures under external loading is crucial. Repeating unit cells (RUCs) are commonly used to represent microstructural details and homogenize the effective response of composites. This work develops a machine learning-based micromechanics tool to accurately predict the stress distributions of extracted RUCs. The locally exact homogenization theory efficiently generates the microstructural stresses of RUCs with a wide range of parameters, including volume fraction, fiber/matrix property ratio, fiber shapes, and loading direction. Subsequently, the conditional generative adversarial network… More > Graphic Abstract

Wenjun Zhou^1,2, Mingzhi Yang¹, Qian Peng², Yong Peng^1,*, Kui Wang¹, Qiang Xiao¹

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 735-755, 2024, DOI:10.32604/cmes.2024.047258

Abstract The widespread adoption of aluminum alloy electric buses, known for their energy efficiency and eco-friendliness, faces a challenge due to the aluminum frame’s susceptibility to deformation compared to steel. This issue is further exacerbated by the stringent requirements imposed by the flammability and explosiveness of batteries, necessitating robust frame protection. Our study aims to optimize the connectors of aluminum alloy bus frames, emphasizing durability, energy efficiency, and safety. This research delves into Multi-Objective Coordinated Optimization (MCO) techniques for lightweight design in aluminum alloy bus body connectors. Our goal is to enhance lightweighting, reinforce energy absorption, and improve deformation resistance in… More >

Hayder Kareem Sakran^1,2, Mohd Sharizal Abdul Aziz^1,*, Chu Yee Khor³

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 109-137, 2024, DOI:10.32604/cmes.2024.047245

Abstract The centrifugal pump is a prevalent power equipment widely used in different engineering patterns, and the impeller blade wrap angle significantly impacts its performance. A numerical investigation was conducted to analyze the influence of the blade wrap angle on flow characteristics and energy distribution of a centrifugal pump evaluated as a low specific speed with a value of 69. This study investigates six impeller models that possess varying blade wrap angles (95°, 105°, 115°, 125°, 135°, and 145°) that were created while maintaining the same volute and other geometrical characteristics. The investigation of energy loss was conducted to evaluate the… More > Graphic Abstract

Wenxiang Dong, H. Vicky Zhao^*

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 139-170, 2024, DOI:10.32604/cmes.2024.047156

Abstract Understanding and modeling individuals’ behaviors during epidemics is crucial for effective epidemic control. However, existing research ignores the impact of users’ irrationality on decision-making in the epidemic. Meanwhile, existing disease control methods often assume users’ full compliance with measures like mandatory isolation, which does not align with the actual situation. To address these issues, this paper proposes a prospect theory-based framework to model users’ decision-making process in epidemics and analyzes how irrationality affects individuals’ behaviors and epidemic dynamics. According to the analysis results, irrationality tends to prompt conservative behaviors when the infection risk is low but encourages risk-seeking behaviors when… More >