Wenjun Zhou^1,2, Mingzhi Yang¹, Qian Peng², Yong Peng^1,*, Kui Wang¹, Qiang Xiao¹

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 735-755, 2024, DOI:10.32604/cmes.2024.047258

Abstract The widespread adoption of aluminum alloy electric buses, known for their energy efficiency and eco-friendliness, faces a challenge due to the aluminum frame’s susceptibility to deformation compared to steel. This issue is further exacerbated by the stringent requirements imposed by the flammability and explosiveness of batteries, necessitating robust frame protection. Our study aims to optimize the connectors of aluminum alloy bus frames, emphasizing durability, energy efficiency, and safety. This research delves into Multi-Objective Coordinated Optimization (MCO) techniques for lightweight design in aluminum alloy bus body connectors. Our goal is to enhance lightweighting, reinforce energy absorption, and improve deformation resistance in… More >

Dongsheng Jia, Yingjie Xu^*, Liangdi Wang, Jihong Zhu, Weihong Zhang

CMES-Computer Modeling in Engineering & Sciences, Vol.140, No.1, pp. 171-199, 2024, DOI:10.32604/cmes.2024.046703

Abstract The abalone shell, a composite material whose cross-section is composed of inorganic and organic layers, has high strength and toughness. Inspired by the abalone shell, several multi-layer composite plates with different layer sequences and thicknesses are studied as bullet-proof material in this paper. To investigate the ballistic performance of this multi-layer structure, the complete characterization model and related material parameters of large deformation, failure and fracture of Al₂O₃ ceramics and Carbon Fiber Reinforced Polymer (CFRP) are studied. Then, 3D finite element models of the proposed composite plates with different layer sequences and thicknesses impacted by a 12.7 mm armor-piercing incendiary… More >

B. MOULIPRASANTH^A, P. HARIHARAN^B

Journal of Polymer Materials, Vol.36, No.4, pp. 351-369, 2019, DOI:10.32381/JPM.2019.36.04.5

Abstract Electrical discharge machining is a non-traditional machining processes in which it is based upon thermal and electrical energy source as an interval energy pulse discharge in-between the work piece and tool electrode so as to remove the material. A systematical investigation of melting and vaporising of aluminium to find the output responses such as Material removal rate (MRR), Electrode wear rate (R_a), and Surface finish (EWR) in EDM using two different dielectrics was conducted as experimental work. The working fluids are Polyethylene glycol (PEG 600) and kerosene. It is the hour of need to get the maximum MRR and surface… More >

S.R. MANE^1,2, E. K. PATHAN³, G. PATIL⁴, S. G. TUPE⁵, V. GHORMADE⁴, B. P. CHAUDHARI^1,2, M.V. DESHPANDE^5,*

Journal of Polymer Materials, Vol.38, No.3-4, pp. 219-230, 2021, DOI:10.32381/JPM.2021.38.3-4.4

Abstract A dimorphic fungus Benjaminiella poitrasii contains high chitin/chitosan (35% of the cell wall) in the mycelial (M) form than its yeast (Y) form (20% of the cell wall). However, the relative proportion of chitosan is more in yeast form cells (chitosan: chitin ratio, 6:1) than mycelial cells (chitosan: chitin ratio, 3:1). Using the Taguchi design of experimental (DOE) approach, interactions among eight different parameters showed that carbon source (starch, 10 g/L), incubation time (48 h), inoculum (M and Y mixed 10%), yeast extract (6 g/L) and peptone (10 g/L), were optimum for maximum biomass production. Under these conditions, the chitosan… More >

S. MATHIVANAN^*, R. MOHAN, RAMES C PANDA, P. BALACHANDER¹

Journal of Polymer Materials, Vol.39, No.3-4, pp. 195-204, 2022, DOI:10.32381/JPM.2022.39.3-4.2

Abstract Optimum-designed footwear with polyurethane (PU) material for comfort is an important requirement for obese. Investigations on compressive behavior of varied designed footwear using 120 D PU material have been carried out. The energy absorption primarily depends on heel height, slope angle and load applied or body mass index of obese. Statistical analysis has been used to formulate the prediction of absorbed energy wherein a heel height of 30 mm with 20-degree angle provides optimum value with the incorporation of 120 D PU material. A coefficientof-determination (R² ) value of 0.9406 confirms the suitability of the statistical regression model. Hence, the… More >

Muhammad Farhan^1,#, Manda Sathish², Rafia Kiran¹, Aroosa Mushtaq³, Alaa Baazeem⁴, Ammarah Hasnain⁵, Fahad Hakim¹, Syed Atif Hasan Naqvi^1,#,*, Mustansar Mubeen⁶, Yasir Iftikhar^6,*, Aqleem Abbas⁷, Muhammad Zeeshan Hassan¹, Mahmoud Moustafa⁸

Phyton-International Journal of Experimental Botany, Vol.93, No.3, pp. 581-609, 2024, DOI:10.32604/phyton.2024.046857

Abstract

Plant growth and resilience to abiotic stresses, such as soil salinity and drought, depend intricately on nitrogen metabolism. This review explores nitrogen’s regulatory role in plant responses to these challenges, unveiling a dynamic interplay between nitrogen availability and abiotic stress. In the context of soil salinity, a nuanced relationship emerges, featuring both antagonistic and synergistic interactions between salinity and nitrogen levels. Salinity-induced chlorophyll depletion in plants can be alleviated by optimal nitrogen supplementation; however, excessive nitrogen can exacerbate salinity stress. We delve into the complexities of this interaction and its agricultural implications. Nitrogen, a vital element within essential plant structures… More >

Muhammad Umar Nasir¹, Omar Kassem Khalil², Karamath Ateeq³, Bassam SaleemAllah Almogadwy⁴, Muhammad Adnan Khan⁵, Muhammad Hasnain Azam⁶, Khan Muhammad Adnan^7,*

CMC-Computers, Materials & Continua, Vol.78, No.3, pp. 3303-3321, 2024, DOI:10.32604/cmc.2024.048035

Abstract Cardiotocography measures the fetal heart rate in the fetus during pregnancy to ensure physical health because cardiotocography gives data about fetal heart rate and uterine shrinkages which is very beneficial to detect whether the fetus is normal or suspect or pathologic. Various cardiotocography measures infer wrongly and give wrong predictions because of human error. The traditional way of reading the cardiotocography measures is the time taken and belongs to numerous human errors as well. Fetal condition is very important to measure at numerous stages and give proper medications to the fetus for its well-being. In the current period Machine learning… More >

Bhawna Goyal¹, Ayush Dogra², Dawa Chyophel Lepcha¹, Rajesh Singh³, Hemant Sharma⁴, Ahmed Alkhayyat⁵, Manob Jyoti Saikia^6,*

CMC-Computers, Materials & Continua, Vol.78, No.3, pp. 4317-4342, 2024, DOI:10.32604/cmc.2024.047256

Abstract Multimodal medical image fusion has attained immense popularity in recent years due to its robust technology for clinical diagnosis. It fuses multiple images into a single image to improve the quality of images by retaining significant information and aiding diagnostic practitioners in diagnosing and treating many diseases. However, recent image fusion techniques have encountered several challenges, including fusion artifacts, algorithm complexity, and high computing costs. To solve these problems, this study presents a novel medical image fusion strategy by combining the benefits of pixel significance with edge-preserving processing to achieve the best fusion performance. First, the method employs a cross-bilateral… More >

Rashmi Sharma¹, Ashok Pal¹, Nitin Mittal², Lalit Kumar², Sreypov Van³, Yunyoung Nam^3,*, Mohamed Abouhawwash^4,5

CMC-Computers, Materials & Continua, Vol.78, No.3, pp. 3489-3510, 2024, DOI:10.32604/cmc.2024.046606

Abstract This study proposes a hybridization of two efficient algorithm’s Multi-objective Ant Lion Optimizer Algorithm (MOALO) which is a multi-objective enhanced version of the Ant Lion Optimizer Algorithm (ALO) and the Genetic Algorithm (GA). MOALO version has been employed to address those problems containing many objectives and an archive has been employed for retaining the non-dominated solutions. The uniqueness of the hybrid is that the operators like mutation and crossover of GA are employed in the archive to update the solutions and later those solutions go through the process of MOALO. A first-time hybrid of these algorithms is employed to solve… More >

Xiaoying Chen^1,*, Jie Kang¹, Cong Hu²

Journal of New Media, Vol.6, pp. 1-16, 2024, DOI:10.32604/jnm.2024.045833

Abstract With the development of cities and the prevalence of networks, interpersonal relationships have become increasingly distant. When people crave communication, they hope to find someone to confide in. With the rapid advancement of deep learning and big data technologies, an enabling environment has been established for the development of intelligent chatbot systems. By effectively combining cutting-edge technologies with human-centered design principles, chatbots hold the potential to revolutionize our lives and alleviate feelings of loneliness. A multi-topic chat companion robot based on a state machine has been proposed, which can engage in fluent dialogue with humans and meet different functional requirements.… More >