Al-Bahkali Essam¹, Souli Mhamed², Al-Bahkali Thamar¹

CMC-Computers, Materials & Continua, Vol.46, No.1, pp. 57-78, 2015, DOI:10.3970/cmc.2015.046.057

Abstract Simulation of hydrodynamic impact problems and its effect on surrounding structures, can be considered as a fluid structure coupling problem. The application is mainly used in automotive and aerospace engineering and also in civil engineering. Classical FEM and Finite Volume methods were the main formulations used by engineers to solve these problems. For the last decades, new formulations have been developed for fluid structure coupling applications using mesh free methods as SPH method, (Smooth Particle Hydrodynamic) and DEM (Discrete Element Method). Up to these days very little has been done to compare different methods and assess which one would be… More >

Ridha Djebali¹, Mohsen Toujani², Bernard Pateyron³

CMC-Computers, Materials & Continua, Vol.37, No.3, pp. 147-160, 2013, DOI:10.3970/cmc.2013.037.147

Abstract In this paper a study of the atmospheric plasma spraying process was conducted. The Jets&Poudres code was used to solve the partial differential equations for the conservation of mass, momentum and energy involved in the problem together with the K-e turbulent model. The Taguchi technique was used to study the influence of processing factors on droplet impact properties obtained on dense zirconia (ZrO₂) under H₂Ar75% plasma gas that allow optimal functioning condition. The test of the operating parameters for the studied ranges showed that the "thermal power" factor plays a key role on the state of sprayed powder. It was… More >

Jennifer D. Rhymer¹, Hyonny Kim¹

CMC-Computers, Materials & Continua, Vol.35, No.2, pp. 87-117, 2013, DOI:10.3970/cmc.2013.035.087

Abstract Polymer matrix composite structures are exposed to a variety of impact threats including hail ice. Internal delamination damage created by these impacts can exist in a form that is visually undetectable. This paper establishes an analysis methodology for predicting the onset of delamination damage in toughened carbon/epoxy composite laminates when impacted by high velocity ice spheres (hailstones). Experiments and analytical work focused on ice sphere impact onto composite panels have determined the failure threshold energy as a function of varying ice diameter and panel thickness, and have established the ability to predict the onset of delamination using cohesive elements in… More >

Yihua Xiao¹, Xu Han^1,2, Dean Hu¹

CMC-Computers, Materials & Continua, Vol.23, No.1, pp. 9-34, 2011, DOI:10.3970/cmc.2011.023.009

Abstract For impact computations, it is efficient to model small and large deformation regions by Finite Element Method (FEM) and Smoothed Particle Hydrodynamics (SPH), respectively. However, it requires an effective algorithm to couple FEM and SPH calculations. To fulfill this requirement, an alternative coupling algorithm is presented in this paper. In the algorithm, the coupling between element and particle regions are achieved by treating elements as imaginary particles and applying equivalent tractions to element sides on coupling interfaces. In addition, an adaptive coupling technique is proposed based on the algorithm to improve the computational efficiency of FEM-SPH coupling further. For this… More >

S. N.V.R.K. Kurapati¹, Y. C. Lu¹, F. Yang²

CMC-Computers, Materials & Continua, Vol.20, No.1, pp. 1-18, 2010, DOI:10.3970/cmc.2010.020.001

Abstract The spherical indentation of elastic film /substrate structures is analyzed using the finite element method. The load-displacement curves of the film /substrate structures of various configurations are obtained and analyzed. A generalized power law relation is established, which can be used to analyze the load-displacement curve of elastic film /substrate systems under spherical indentations. The indentation load is dependent on the modulus ratio of the film to the substrate and film thickness. A semi-analytical expression for the power of the power law relation is also obtained as a function of the normalized film thickness and normalized film modulus, which can… More >

J. Zidek¹ , J. Kucera¹, J. Jancar¹

CMC-Computers, Materials & Continua, Vol.16, No.1, pp. 51-74, 2010, DOI:10.3970/cmc.2010.016.051

Abstract It has been shown that in particulate filled composites, a cross-property relationship exists between various transport properties (e.g., electrical conductivity, mechanical reinforcement, gas permeation) of a macroscale composite. Thus, knowledge of the effective mechanical properties of a composite immediately places bounds on its electrical conductivity or gas permeation behavior. Using these bounds allows us to predict the phase dispersion state that optimizes one or multiple properties of the composite and, thus, the knowledge of how spatial arrangement of filler particles at their given content affects physical properties of the composite can be valuable. In this paper, a new numerical model… More >

Rasa Kazakevičiũtè-Makovska¹

CMC-Computers, Materials & Continua, Vol.15, No.1, pp. 27-44, 2010, DOI:10.3970/cmc.2010.015.027

Abstract The phenomenon of stress softening observed in the cyclic inflation of spherical balloons or membranes is quantitatively and qualitatively examined. A new measure of the stress softening extent is proposed which correctly captures the main feature of this phenomenon. This measure of the stress softening is related to the relevant response functions in the constitutive models proposed in the literature to describe this effect. Using these relationships, the predictive capability of the theoretical models is examined. It is shown that only those theoretical models which admit a non-monotone character of the stress softening can properly describe this phenomenon. More >

B Keerthika¹, Y P Cao², D Raabe¹

CMC-Computers, Materials & Continua, Vol.10, No.3, pp. 243-258, 2009, DOI:10.3970/cmc.2009.010.243

Abstract In this study, effects of the plastic deformation and the time-dependent deformation behavior on the fundamental relations in the Oliver & Pharr method are studied by using finite element analysis based on a viscoelastic-plastic model developed for polymers. The study eventually yields an experimental protocol and using which, the instantaneous modulus of the viscoelastic-plastic materials may be reliably determined. Experiments have been performed on four polymers to verify the conclusions from the numerical analysis. More >

X.G. Yuan¹, R.J. Zhang²

CMC-Computers, Materials & Continua, Vol.3, No.3, pp. 119-130, 2006, DOI:10.3970/cmc.2006.003.119

Abstract In this paper, the problem of cavity formation and motion in an incompressible transversely isotropic nonlinearly elastic solid sphere, which is subjected to a uniform radial tensile dead load on its surface, is examined in the context of nonlinear elastodynamics. The strain energy density associated with the nonlinearly elastic material may be viewed as the generalized forms of some known material models. It is proved that some determinate conditions must be imposed on the form of the strain energy density such that the surface tensile dead load has a finite critical value. Correspondingly, as the surface tensile dead load exceeds… More >

K.Y. Volokh ¹

CMC-Computers, Materials & Continua, Vol.3, No.1, pp. 37-42, 2006, DOI:10.3970/cmc.2007.003.037

Abstract Lagrangian or referential equilibrium equations for materials undergoing large deformations are of interest in the developing fields of mechanics of soft biomaterials and nanomechanics. The main feature of these equations is the necessity to deal with the First Piola-Kirchhoff, or nominal, stress tensor which is a two-point tensor referring simultaneously to the reference and current configurations. This two-point nature of the First Piola-Kirchhoff tensor is not always appreciated by the researchers and the total covariant derivative necessary for the formulation of the equilibrium equations in curvilinear coordinates is sometimes inaccurately confused with the regular covariant derivative. Surprisingly, the traditional continuum… More >