Elias Hossain¹, Mohammed Alshehri², Sultan Almakdi^2,*, Hanan Halawani², Md. Mizanur Rahman³, Wahidur Rahman⁴, Sabila Al Jannat⁵, Nadim Kaysar⁶, Shishir Mia⁴

CMC-Computers, Materials & Continua, Vol.72, No.1, pp. 1713-1746, 2022, DOI:10.32604/cmc.2022.024822

Abstract Diabetes Mellitus is one of the most severe diseases, and many studies have been conducted to anticipate diabetes. This research aimed to develop an intelligent mobile application based on machine learning to determine the diabetic, pre-diabetic, or non-diabetic without the assistance of any physician or medical tests. This study's methodology was classified into two the Diabetes Prediction Approach and the Proposed System Architecture Design. The Diabetes Prediction Approach uses a novel approach, Light Gradient Boosting Machine (LightGBM), to ensure a faster diagnosis. The Proposed System Architecture Design has been combined into seven modules; the Answering Question Module is a natural… More >

Anwer Mustafa Hilal^1,*, Siwar Ben Haj Hassine², Souad Larabi-Marie-Sainte³, Nadhem Nemri², Mohamed K. Nour⁴, Abdelwahed Motwakel¹, Abu Sarwar Zamani¹, Mesfer Al Duhayyim⁵

CMC-Computers, Materials & Continua, Vol.72, No.1, pp. 713-726, 2022, DOI:10.32604/cmc.2022.024501

Abstract The development in Information and Communication Technology has led to the evolution of new computing and communication environment. Technological revolution with Internet of Things (IoTs) has developed various applications in almost all domains from health care, education to entertainment with sensors and smart devices. One of the subsets of IoT is Internet of Medical things (IoMT) which connects medical devices, hardware and software applications through internet. IoMT enables secure wireless communication over the Internet to allow efficient analysis of medical data. With these smart advancements and exploitation of smart IoT devices in health care technology there increases threat and malware… More >

Soobia Saeed^1,*, Afnizanfaizal Abdullah¹, N. Z. Jhanjhi², Mehmood Naqvi³, Mehedi Masud⁴, Mohammed A. AlZain⁵

CMC-Computers, Materials & Continua, Vol.72, No.1, pp. 851-869, 2022, DOI:10.32604/cmc.2022.024085

Abstract Diagnosing data or object detection in medical images is one of the important parts of image segmentation especially those data which is less effective to identify in MRI such as low-grade tumors or cerebral spinal fluid (CSF) leaks in the brain. The aim of the study is to address the problems associated with detecting the low-grade tumor and CSF in brain is difficult in magnetic resonance imaging (MRI) images and another problem also relates to efficiency and less execution time for segmentation of medical images. For tumor and CSF segmentation using trained light field database (LFD) datasets of MRI images.… More >

Kriti¹, Mohd Anul Haq², Urvashi Garg¹, Mohd Abdul Rahim Khan^2,*, V. Rajinikanth³

CMC-Computers, Materials & Continua, Vol.72, No.1, pp. 939-957, 2022, DOI:10.32604/cmc.2022.023169

Abstract A crucial task in hyperspectral image (HSI) taxonomy is exploring effective methodologies to effusively practice the 3-D and spectral data delivered by the statistics cube. For classification of images, 3-D data is adjudged in the phases of pre-cataloging, an assortment of a sample, classifiers, post-cataloging, and accurateness estimation. Lastly, a viewpoint on imminent examination directions for proceeding 3-D and spectral approaches is untaken. In topical years, sparse representation is acknowledged as a dominant classification tool to effectually labels deviating difficulties and extensively exploited in several imagery dispensation errands. Encouraged by those efficacious solicitations, sparse representation (SR) has likewise been presented… More >

Khalid A. AlAfandy¹, Hicham Omara², Hala S. El-Sayed³, Mohammed Baz^4,*, Mohamed Lazaar⁵, Osama S. Faragallah⁶, Mohammed Al Achhab¹

CMC-Computers, Materials & Continua, Vol.72, No.1, pp. 739-753, 2022, DOI:10.32604/cmc.2022.022457

Abstract Remote sensing image processing engaged researchers’ attentiveness in recent years, especially classification. The main problem in classification is the ratio of the correct predictions after training. Feature extraction is the foremost important step to build high-performance image classifiers. The convolution neural networks can extract images’ features that significantly improve the image classifiers’ accuracy. This paper proposes two efficient approaches for remote sensing images classification that utilizes the concatenation of two convolution channels’ outputs as a features extraction using two classic convolution models; these convolution models are the ResNet 50 and the DenseNet 169. These elicited features have been used by… More >

Qiang Zhang¹, Xianguang Zha¹, Jun Wu¹, Liang Zhang¹, Wei Dai², Gang Ren³, Shiqian Li³, Ning Ji^3,*, Xiangjun Zhu³, Fengwei Tian³

Structural Durability & Health Monitoring, Vol.16, No.1, pp. 37-51, 2022, DOI:10.32604/sdhm.2022.018422

Abstract As the emergency power supply for a simulation substation, lead-acid batteries have a work pattern featuring non-continuous operation, which leads to capacity regeneration. However, the accurate estimation of battery state of charge (SOC), a measurement of the amount of energy available in a battery, remains a hard nut to crack because of the non-stationarity and randomness of battery capacity change. This paper has proposed a comprehensive method for lead-acid battery SOC estimation, which may aid in maintaining a reasonable charging schedule in a simulation substation and improving battery’s durability. Based on the battery work pattern, an improved Ampere-hour method is… More >

K. Poongodi^1,*, A. Sabari²

Intelligent Automation & Soft Computing, Vol.33, No.2, pp. 939-953, 2022, DOI:10.32604/iasc.2022.023038

Abstract The microarray gene expression data has a large number of genes with different expression levels. Analyzing and classifying datasets with entire gene space is quite difficult because there are only a few genes that are informative. The identification of bio-marker genes is significant because it improves the diagnosis of cancer disease and personalized medicine is suggested accordingly. Initially, the parallelized minimum redundancy and maximum relevance ensemble (mRMRe) is employed to select top m informative genes. The selected genes are then fed into the Genetic Algorithm (GA) that selects the optimal set of genes heuristically, which uses Mahalanobis Distance (MD) as… More >

Yue Jiang, Xinyu Zhang, Wohuan Jia, Li Xu^*

Journal on Artificial Intelligence, Vol.3, No.4, pp. 163-169, 2021, DOI:10.32604/jai.2021.027590

Abstract As a new type of knowledge sharing platform, the community question answer website realizes the acquisition and sharing of knowledge, and is loved and sought after by the majority of users. But for multi-answer questions, answer quality assessment becomes a challenge. The answer selection in CQA (Community Question Answer) was proposed as a challenge task in the SemEval competition, which gave a data set and proposed two subtasks. Task-A is to give a question (including short title and extended description) and its answers, and divide each answer into absolutely relevant (good), potentially relevant (potential) and bad or irrelevant (bad, dialog,… More >

Sukanta Ghosh¹, Amar Singh¹, Kavita^2,*, N. Z. Jhanjhi³, Mehedi Masud⁴, Sultan Aljahdali⁴

CMC-Computers, Materials & Continua, Vol.71, No.3, pp. 4257-4274, 2022, DOI:10.32604/cmc.2022.023414

Abstract Automatic plant classification through plant leaf is a classical problem in Computer Vision. Plants classification is challenging due to the introduction of new species with a similar pattern and look-a-like. Many efforts are made to automate plant classification using plant leaf, plant flower, bark, or stem. After much effort, it has been proven that leaf is the most reliable source for plant classification. But it is challenging to identify a plant with the help of leaf structure because plant leaf shows similarity in morphological variations, like sizes, textures, shapes, and venation. Therefore, it is required to normalize all plant leaves… More >

Ivan Izonin^1,*, Roman Tkachenko¹, Michal Gregus², Zoia Duriagina^1,3, Nataliya Shakhovska¹

CMC-Computers, Materials & Continua, Vol.71, No.3, pp. 5933-5947, 2022, DOI:10.32604/cmc.2022.022582

Abstract The advent of additive technologies has provided a significant breakthrough in the production of medical implants. It has reduced costs, increased productivity and accuracy of the implant manufacturing process. However, there are problems associated with assessing defects in the microstructure, mechanical and technological properties of alloys, both during their production by powder metallurgy and in the process of 3D printing. Thus traditional research methods of alloys properties demand considerable human, material, and time resources. At the same time, artificial intelligence tools create opportunities for intelligent evaluation of the conformity for the microstructure, phase composition, and properties of titanium powder’s alloys.… More >