S. Gao¹, K. Nakasa², K. Nogi³, L. Huang⁴

CMC-Computers, Materials & Continua, Vol.22, No.1, pp. 39-54, 2011, DOI:10.3970/cmc.2011.022.039

Abstract An incremental press-forming method was newly developed for the fabrication of spiral plates of a continuous screw conveyer, boring screw, screw pump and so on. In this method, a pair of V-shaped punches and dies with two opposite inclined edges are used instead of punch and die with spiral surfaces. The experiments on incremental forming were carried out on aluminum alloy and steel disks with a hole and a slit, and the deformation process of the plate during and after the press-forming was simulated by a finite element method (FEM). The press-forming shows that the spiral plate has a correct… More >

Bin Li¹, Guo-biao Yang¹, Qi-rong Zhu², Fan Ni²

CMC-Computers, Materials & Continua, Vol.21, No.2, pp. 107-118, 2011, DOI:10.3970/cmc.2011.021.107

Abstract In this paper, digital image correlation method (DICM) is employed to measure the shear behavior of the spot welding specimens and the ones using adhesive under quasi-static lap shear testing. The images of the specimens' surfaces are captured in real-time by CCD and corresponding computer system. DICM is subsequently used to obtained strain by correlating the images captured before and after deformation. Then, both force-displacement curves and stress-strain curves of the specimens including the cracking load are obtained. The results and analysis show that the mechanical properties of specimens using adhesive compared with the spot welding specimens have an obvious… More >

Chih-Wen Chang¹

CMC-Computers, Materials & Continua, Vol.21, No.2, pp. 87-106, 2011, DOI:10.3970/cmc.2011.021.087

Abstract We address a new numerical approach to deal with these multi-dimensional backward wave problems (BWPs) in this study. A fictitious time τ is utilized to transform the dependent variable u(x, y, z, t) into a new one by (1+τ)u(x, y, z, t)=: v(x, y, z, t, τ), such that the original wave equation is written as a new hyperbolic type partial differential equation in the space of (x, y, z, t, τ). Besides, a fictitious viscous damping coefficient can be employed to strengthen the stability of numerical integration of the discretized equations by using a group preserving scheme. Several numerical… More >

Chein-Shan Liu¹

CMC-Computers, Materials & Continua, Vol.21, No.1, pp. 17-40, 2011, DOI:10.3970/cmc.2011.021.017

Abstract Only the left-boundary data of temperature and heat flux are used to estimate an unknown parameter function α(x) in T_t(x,t) = ∂(α(x)T_x)/∂x + h(x,t), as well as to recover the right-boundary data. When α(x) is given the above problem is a well-known inverse heat conduction problem (IHCP). This paper solves a mixed-type inverse problem as a combination of the IHCP and the problem of parameter identification, without needing to assume a function form of α(x) a priori, and without measuring extra data as those used by other methods. We use the one-step Lie-Group Adaptive Method (LGAM) for the semi-discretizations of… More >

X. H. Du¹, X. P. Shen¹

CMC-Computers, Materials & Continua, Vol.20, No.3, pp. 225-242, 2010, DOI:10.3970/cmc.2010.020.225

Abstract Aim of this paper is to estimate the integrity of liquefied natural gas (LNG) prestressed storage tank under seismic influence. The coupled Eulerian-Lagrangian (CEL) analysis technique is used to simulate the fluid-structure interaction between LNG and the cylinder of LNG prestressed storage tank. The 3-D model of LNG has been dispersed by Eulerian mesh that is different from traditional analysis method which is called the added mass method. Meanwhile, both of the 3-D models of prestressed rebar and concrete structure are dispersed by Lagrangian mesh. Following conclusions are obtained: 1) Natural frequency of the whole model has been obtained by… More >

N.J. Bartle¹, P.D. Gosling¹

CMC-Computers, Materials & Continua, Vol.20, No.1, pp. 19-62, 2010, DOI:10.3970/cmc.2010.020.019

Abstract ETFE cushions are increasingly being used to form high-profile facades and structural forms. This investigation aims to extend an analytical theory of large deformation in order to predict the shape and stress distributions of an un-patterned square ETFE cushion without the need to resort to discretised numerical methods. In order to assess the validity of the theoretical procedure a prototype cushion has been analysed using a finite element simulation. The theoretical procedure is also compared with alternative approximate equations proposed for the design of ETFE cushions. More >

Chih-Wen Chang¹

CMC-Computers, Materials & Continua, Vol.19, No.3, pp. 285-314, 2010, DOI:10.3970/cmc.2010.019.285

Abstract In this article, we propose a new numerical approach for solving these multi-dimensional nonlinear and nonhomogeneous backward heat conduction problems (BHCPs). A fictitious time t is employed to transform the dependent variable u(x, y, z, t) into a new one by (1+t)u(x, y, z, t)=: v(x, y, z, t, t), such that the original nonlinear and nonhomogeneous heat conduction equation is written as a new parabolic type partial differential equation in the space of (x, y, z, t, t). In addition, a fictitious viscous damping coefficient can be used to strengthen the stability of numerical integration of the discretized equations… More >

Pavel Grinfeld¹

CMC-Computers, Materials & Continua, Vol.19, No.3, pp. 239-254, 2010, DOI:10.3970/cmc.2010.019.239

Abstract We model viscosity in the framework of the exact nonlinear equations of fluid film dynamics. The proposed approach yields monotonic dissipation of energy and guarantees that viscous forces are not engaged when the film undergoes rigid motion. With the addition of viscosity, the governing system has all the essential elements - inertia, surface tension, interaction with the ambient medium, influence of external fields and, now, viscosity - for accurate prediction and interpretation of experimental observations. The fluid film is modelled as a two-dimensional manifold. The film's thickness is represented by a surface density function. The resulting system is the fluid… More >

L.L. Zhu^1,2,3, X.J. Zheng^1,2

CMC-Computers, Materials & Continua, Vol.18, No.3, pp. 301-320, 2010, DOI:10.3970/cmc.2010.018.301

Abstract The phonon properties of spatially confined nanofilms under the preexisting stress fields are investigated theoretically by accounting for the confinement effects and acoustoelastic effects. Due to the spatial confinement in low-dimensional structures, the phonon dispersion relations, phonon group velocities as well as the phonon density of states are of significant difference with the ones in bulk structures. Here, the continuum elasticity theory is made use of to determine the phonon dispersion relations of shear modes (SH), dilatational modes (SA) and the flexural modes (AS), thus to analyze the contribution of stress fields on the phonon performance of confined nanofilms. Our… More >

A.J. Shaw¹ and P.D. Gosling^1,2

CMC-Computers, Materials & Continua, Vol.18, No.3, pp. 237-270, 2010, DOI:10.3970/cmc.2010.018.237

Abstract This article has no abstract. More >