Abdul Haseeb¹, Muhammad Attique Khan^1,*, Faheem Shehzad¹, Majed Alhaisoni², Junaid Ali Khan¹, Taerang Kim³, Jae-Hyuk Cha³

Computer Systems Science and Engineering, Vol.47, No.2, pp. 2397-2415, 2023, DOI:10.32604/csse.2023.040529

Abstract X-Ray knee imaging is widely used to detect knee osteoarthritis due to ease of availability and lesser cost. However, the manual categorization of knee joint disorders is time-consuming, requires an expert person, and is costly. This article proposes a new approach to classifying knee osteoarthritis using deep learning and a whale optimization algorithm. Two pre-trained deep learning models (Efficientnet-b0 and Densenet201) have been employed for the training and feature extraction. Deep transfer learning with fixed hyperparameter values has been employed to train both selected models on the knee X-Ray images. In the next step, fusion is performed using a canonical… More >

Ahmad Almadhor^1,*, Arfat Ahmad Khan², Chitapong Wechtaisong^3,*, Iqra Yousaf⁴, Natalia Kryvinska⁵, Usman Tariq⁶, Haithem Ben Chikha¹

Computer Systems Science and Engineering, Vol.47, No.2, pp. 1775-1791, 2023, DOI:10.32604/csse.2023.039007

Abstract Pneumothorax is a thoracic condition that occurs when a person’s lungs collapse, causing air to enter the pleural cavity, the area close to the lungs and chest wall. The most persistent disease, as well as one that necessitates particular patient care and the privacy of their health records. The radiologists find it challenging to diagnose pneumothorax due to the variations in images. Deep learning-based techniques are commonly employed to solve image categorization and segmentation problems. However, it is challenging to employ it in the medical field due to privacy issues and a lack of data. To address this issue, a… More >

José Escorcia-Gutierrez^1,*, Margarita Gamarra¹, Roosvel Soto-Diaz², Safa Alsafari³, Ayman Yafoz⁴, Romany F. Mansour⁵

CMC-Computers, Materials & Continua, Vol.75, No.3, pp. 5255-5270, 2023, DOI:10.32604/cmc.2023.033731

Abstract A chest radiology scan can significantly aid the early diagnosis and management of COVID-19 since the virus attacks the lungs. Chest X-ray (CXR) gained much interest after the COVID-19 outbreak thanks to its rapid imaging time, widespread availability, low cost, and portability. In radiological investigations, computer-aided diagnostic tools are implemented to reduce intra- and inter-observer variability. Using lately industrialized Artificial Intelligence (AI) algorithms and radiological techniques to diagnose and classify disease is advantageous. The current study develops an automatic identification and classification model for CXR pictures using Gaussian Filtering based Optimized Synergic Deep Learning using Remora Optimization Algorithm (GF-OSDL-ROA). This… More >

Ali Akbar Siddique¹, S. M. Umar Talha¹, M. Aamir¹, Abeer D. Algarni², Naglaa F. Soliman^2,*, Walid El-Shafai^3,4

CMC-Computers, Materials & Continua, Vol.75, No.2, pp. 3883-3901, 2023, DOI:10.32604/cmc.2023.037413

Abstract The COVID-19 pandemic has devastated our daily lives, leaving horrific repercussions in its aftermath. Due to its rapid spread, it was quite difficult for medical personnel to diagnose it in such a big quantity. Patients who test positive for Covid-19 are diagnosed via a nasal PCR test. In comparison, polymerase chain reaction (PCR) findings take a few hours to a few days. The PCR test is expensive, although the government may bear expenses in certain places. Furthermore, subsets of the population resist invasive testing like swabs. Therefore, chest X-rays or Computerized Vomography (CT) scans are preferred in most cases, and… More >

Bo Wang^1,*, Yongxin Zhang¹, Shihui Ji², Binbin Zhang¹, Xiangyu Wang¹, Jiyong Zhang¹

CMC-Computers, Materials & Continua, Vol.75, No.2, pp. 3625-3642, 2023, DOI:10.32604/cmc.2023.036754

Abstract A model that can obtain rapid and accurate detection of coronavirus disease 2019 (COVID-19) plays a significant role in treating and preventing the spread of disease transmission. However, designing such a model that can balance the detection accuracy and weight parameters of memory well to deploy a mobile device is challenging. Taking this point into account, this paper fuses the convolutional neural network and residual learning operations to build a multi-class classification model, which improves COVID-19 pneumonia detection performance and keeps a trade-off between the weight parameters and accuracy. The convolutional neural network can extract the COVID-19 feature information by… More >

Hicham Moujahid¹, Bouchaib Cherradi^1,2,*, Oussama El Gannour¹, Wamda Nagmeldin³, Abdelzahir Abdelmaboud⁴, Mohammed Al-Sarem^5,6, Lhoussain Bahatti¹, Faisal Saeed⁷, Mohammed Hadwan^8,9

Computer Systems Science and Engineering, Vol.46, No.2, pp. 1789-1809, 2023, DOI:10.32604/csse.2023.034022

Abstract Due to the rapid propagation characteristic of the Coronavirus (COVID-19) disease, manual diagnostic methods cannot handle the large number of infected individuals to prevent the spread of infection. Despite, new automated diagnostic methods have been brought on board, particularly methods based on artificial intelligence using different medical data such as X-ray imaging. Thoracic imaging, for example, produces several image types that can be processed and analyzed by machine and deep learning methods. X-ray imaging materials widely exist in most hospitals and health institutes since they are affordable compared to other imaging machines. Through this paper, we propose a novel Convolutional… More >

Fuat Türk^*

Computer Systems Science and Engineering, Vol.45, No.2, pp. 1357-1373, 2023, DOI:10.32604/csse.2023.030772

Abstract Covid-19 is a deadly virus that is rapidly spread around the world towards the end of the 2020. The consequences of this virus are quite frightening, especially when accompanied by an underlying disease. The novelty of the virus, the constant emergence of different variants and its rapid spread have a negative impact on the control and treatment process. Although the new test kits provide almost certain results, chest X-rays are extremely important to detect the progression and degree of the disease. In addition to the Covid-19 virus, pneumonia and harmless opacity of the lungs also complicate the diagnosis. Considering the… More >

Sukhendra Singh¹, Sur Singh Rawat², Manoj Gupta³, B. K. Tripathi⁴, Faisal Alanzi⁵, Arnab Majumdar⁶, Pattaraporn Khuwuthyakorn⁷, Orawit Thinnukool^7,*

CMC-Computers, Materials & Continua, Vol.74, No.1, pp. 1673-1691, 2023, DOI:10.32604/cmc.2023.032364

Abstract In computer vision, object recognition and image categorization have proven to be difficult challenges. They have, nevertheless, generated responses to a wide range of difficult issues from a variety of fields. Convolution Neural Networks (CNNs) have recently been identified as the most widely proposed deep learning (DL) algorithms in the literature. CNNs have unquestionably delivered cutting-edge achievements, particularly in the areas of image classification, speech recognition, and video processing. However, it has been noticed that the CNN-training assignment demands a large amount of data, which is in low supply, especially in the medical industry, and as a result, the training… More >

Syeda Naila Batool, Ghulam Gilanie^*

CMC-Computers, Materials & Continua, Vol.74, No.1, pp. 1319-1332, 2023, DOI:10.32604/cmc.2023.032121

Abstract Automated and autonomous decisions of image classification systems have essential applicability in this modern age even. Image-based decisions are commonly taken through explicit or auto-feature engineering of images. In forensic radiology, auto decisions based on images significantly affect the automation of various tasks. This study aims to assist forensic radiology in its biological profile estimation when only bones are left. A benchmarked dataset Radiology Society of North America (RSNA) has been used for research and experiments. Additionally, a locally developed dataset has also been used for research and experiments to cross-validate the results. A Convolutional Neural Network (CNN)-based model named… More >

Nagwan Abdel Samee¹, El-Sayed M. El-Kenawy^2,3, Ghada Atteia^1,*, Mona M. Jamjoom⁴, Abdelhameed Ibrahim⁵, Abdelaziz A. Abdelhamid^6,7, Noha E. El-Attar⁸, Tarek Gaber^9,10, Adam Slowik¹¹, Mahmoud Y. Shams¹²

CMC-Computers, Materials & Continua, Vol.73, No.2, pp. 4193-4210, 2022, DOI:10.32604/cmc.2022.031147

Abstract As corona virus disease (COVID-19) is still an ongoing global outbreak, countries around the world continue to take precautions and measures to control the spread of the pandemic. Because of the excessive number of infected patients and the resulting deficiency of testing kits in hospitals, a rapid, reliable, and automatic detection of COVID-19 is in extreme need to curb the number of infections. By analyzing the COVID-19 chest X-ray images, a novel metaheuristic approach is proposed based on hybrid dipper throated and particle swarm optimizers. The lung region was segmented from the original chest X-ray images and augmented using various… More >