Huda Adel Hassan Ali, Ameer Abed Jaddoa^*, Jafaar Mohamme Daif

Frontiers in Heat and Mass Transfer, Vol.21, pp. 443-465, 2023, DOI:10.32604/fhmt.2023.042288

Abstract This paper is twofold. First, the effect of non-linear thermophysical property variation was presented using supercritical carbon dioxide (SCO₂) around the thermodynamic pivotal point. The second part exhibits an experimental examination of the heat transfer (HT) behaviour of SCO₂ in a helical tube with a hydraulic diameter of 2 mm at different mass fluxes (MF), heat fluxes (HF), and pressures (P). The experiments were carried out based on various pressures, mass fluxes, and heat fluxes for both scenarios. CO₂ was cooled in a 2 mm diameter serpentine tube made of copper material. The experimental results showed that HT degradation could… More > Graphic Abstract

Amal A. Harbood^*, Hameed K. Hamzah, Hatem H. Obeid

Frontiers in Heat and Mass Transfer, Vol.21, pp. 293-315, 2023, DOI:10.32604/fhmt.2023.01518

Abstract The current work seeks to examine numerical heat transfer by using a complicated channel with a trapezoid shape hanging in the channel. This channel demonstrates two-dimensional laminar flow, forced convective flow, and incompressible flow. To explore the behavior of heat transfer in complex channels, several parameters, such as the constant Prandtl number (Pr = 6.9), volume fraction (ϕ) equal to (0.02 to 0.04), Cauchy number (Ca) equal to (10⁻⁴ to 10⁻⁸), and Reynolds number equal to (60 to 160) were utilized. At the complex channel, different elastic walls are used in different locations, with case A being devoid of an… More >

Amnart Boonloi¹, Withada Jedsadaratanachai^2,*

Frontiers in Heat and Mass Transfer, Vol.21, pp. 317-336, 2023, DOI:10.32604/fhmt.2023.044929

Abstract Thermal performance enhancement in a square channel heat exchanger (HX) using a passive technique is presented. Vortex turbulator insertion in a square channel HX as a passive technique is selected for thermal improvement. The vortex turbulator of interest is discrete X-V baffles (XVB). The discrete XVBs are inserted in the square channel with the main aim of generating vortex flow. The vortex flow generated can support the enhanced convective heat transfer coefficient and also enhance HX performance. Effects of baffle configuration (type A and B), baffle size (w/H = 0.05, 0.10, 0.15 and 0.20), baffle distance (e/H = 1, 1.5… More > Graphic Abstract

K. Kaladhar^a,∗, D. Srinivasacharya^b

Frontiers in Heat and Mass Transfer, Vol.7, pp. 1-10, 2016, DOI:10.5098/hmt.7.6

Abstract This present investigation carried out the effects of Hall current, Joule heating and the thermal diffusion on mixed convection flow of electrically conducting couple stress fluid in a vertical channel saturated with porous medium. The final system of ordinary differential equations are obtained from the governing non-linear partial differential equations by using the similarity transformations. Homotopy Analysis Method has been used to solve the non-linear system. The average residue errors of the HAM solutions are presented through graphs. The influence of the emerging parameters (Hall, Soret, magnetic and the couple stress parameters) on velocity, temperature and concentration profiles are presented… More >

D. Lourdu Immaculate^a , R. Muthuraj^b,*, Anant Kant Shukla^c, S. Srinivas^d

Frontiers in Heat and Mass Transfer, Vol.7, pp. 1-14, 2016, DOI:10.5098/hmt.7.12

Abstract This article aims to examine the MHD unsteady flow of Williamson nanofluid in a vertical channel filled with a porous material and oscillating wall temperature. The modeling of this problem is transformed to ordinary differential equations by collecting the non-periodic and periodic terms and then series solutions are obtained by using a powerful method known as the homotopy analysis method (HAM). The influence of involved parameters on heat and mass transfer characteristics of the fluid flow is computed and presented graphically. Further, variations on volume flow rate, coefficient of skin friction, heat transfer rate and mass transfer rate are also… More >

L. Ramamohan Reddy^a , M. C. Raju^b,*, G.S.S. Raju^c, N. A. Reddy^b

Frontiers in Heat and Mass Transfer, Vol.7, pp. 1-12, 2016, DOI:10.5098/hmt.7.20

Abstract This investigation presents an analytical study on magnetohydrodynamic (MHD), convective flow of a viscoelastic, incompressible, radiative, chemically reactive, electrically conducting and rotating fluid through a porous medium filled in a vertical channel in the presence of thermal diffusion. A magnetic field of uniform strength is applied along the axis of rotation. The fluid is assumed to act on with a periodic time variation of the pressure gradient in upward direction vertically. One of the plates is maintained at non-uniform temperature and the temperature difference of the walls of the channel is assumed high enough that induces heat transfer due to… More >

Ankit Kanor, R Manimaran^*

Frontiers in Heat and Mass Transfer, Vol.7, pp. 1-5, 2016, DOI:10.5098/hmt.7.25

Abstract One of the effective liquid cooling techniques for microelectronic devices is attaching micro channel heat sink to the inactive side of chip. A micro channel heat sink is a device that decreases temperature by flowing coolant through micro channels. The present study focuses on the conjugate heat transfer analyses for different cross-sections (trapezoidal, hexagonal, octagonal and circular).After present study is validated with the published result in the literature, the comparative study of parallel and counter flow configuration is performed. Different geometries are modeled using CATIA V5 software and simulated in ANSYS Fluent R14. From these CFD simulations, preferred configuration of… More >

Odelu Ojjela^*, K. Pravin Kashyap, N. Naresh Kuma, Samir Kumar Das

Frontiers in Heat and Mass Transfer, Vol.7, pp. 1-9, 2016, DOI:10.5098/hmt.7.32

Abstract This article presents an unsteady incompressible Upper Convected Maxwell (UCM) fluid flow with temperature dependent thermal conductivity between parallel porous plates which are maintained at different temperatures varying periodically with time. Assume that there is a periodic suction and injection at the upper and lower plates respectively. The governing partial differential equations are reduced to non linear ordinary differential equations by using similarity transformations and the solution is obtained using differential transform method. The effects of various fluid and geometric parameters on the velocity components, temperature distribution and skin friction are discussed in detail through graphs. More >

WEI HU^1,#, THOMAS WARTMANN^2,#, MARCO STRECKER², ARISTOTELIS PERRAKIS², ROLAND CRONER², ARPAD SZALLASI³, WENJIE SHI^2,*, ULF D. KAHLERT^2,*

Oncology Research, Vol.32, No.1, pp. 227-239, 2024, DOI:10.32604/or.2023.043053

Abstract Transient receptor potential (TRP) channels are strongly associated with colon cancer development and progression. This study leveraged a multivariate Cox regression model on publicly available datasets to construct a TRP channels-associated gene signature, with further validation of signature in real world samples from our hospital treated patient samples. Kaplan-Meier (K-M) survival analysis and receiver operating characteristic (ROC) curves were employed to evaluate this gene signature’s predictive accuracy and robustness in both training and testing cohorts, respectively. Additionally, the study utilized the CIBERSORT algorithm and single-sample gene set enrichment analysis to explore the signature’s immune infiltration landscape and underlying functional implications.… More > Graphic Abstract

P.V.S. Kamalakar^a,*, R. Raghavender Rao^a, D.R.V. Prasada Rao^b

Frontiers in Heat and Mass Transfer, Vol.7, pp. 1-9, 2016, DOI:10.5098/hmt.7.2

Abstract In this paper we discuss the effect of chemical reaction and thermal radiation on unsteady free convective heat and mass transfer flow through a porous medium in a vertical wavy channel. The unsteadiness in the flow is due to the oscillatory flux in the flow region. The coupled equations governing the flow, heat and mass transfer have been solved by using a perturbation technique with the slope  of the wavy wall as the perturbation parameter. The expression for the velocity, the temperature, the concentration, the rate of heat and mass transfer are derived and are analyzed for different variations… More >