JALPA V. CHOPDA, DHARMESH B. SANKHAVARA, JIGNESH P. PATEL, P. H. PARSANIA^*

Journal of Polymer Materials, Vol.36, No.4, pp. 391-399, 2019, DOI:10.32381/JPM.2019.36.04.8

Abstract The epoxymethcrylate resin (EMBHBCMA) of (2E, 6E)-bis(4-hydroxybenzylidene)-4- methylcyclohexanone(EMBHBC) was synthesized by condensing EMBHBC and methacrylic acid (1:2 mole ratio) by using 1,4-dioxane as a solvent and triethylamine as a catalyst at reflux temperature for 1-5 h to get acid value < 10. The structure of EMBHBCMA was supported by UV-Vis, FTIR, ¹ HNMR and ¹³CNMR spectroscopic techniques. Molecular weights and molecular weight distribution of EMBHBCMA were determined by gel permeation chromatography. EMBHBCMA is thermally stable up to about 300°C and followed two step degradation reactions. Kinetic parameters such as n, Ea, A and ΔS* were determined according to Anderson-Freeman method… More >

B. MOULIPRASANTH^A, P. HARIHARAN^B

Journal of Polymer Materials, Vol.36, No.4, pp. 351-369, 2019, DOI:10.32381/JPM.2019.36.04.5

Abstract Electrical discharge machining is a non-traditional machining processes in which it is based upon thermal and electrical energy source as an interval energy pulse discharge in-between the work piece and tool electrode so as to remove the material. A systematical investigation of melting and vaporising of aluminium to find the output responses such as Material removal rate (MRR), Electrode wear rate (R_a), and Surface finish (EWR) in EDM using two different dielectrics was conducted as experimental work. The working fluids are Polyethylene glycol (PEG 600) and kerosene. It is the hour of need to get the maximum MRR and surface… More >

SACHIN SINGH^a, MUKTI TYAGI^a,*, AJAY KUMAR TYAGI^a, PRAVEEN KUMAR KAICKER^a, LALIT VARSHNEY^b

Journal of Polymer Materials, Vol.36, No.4, pp. 305-321, 2019, DOI:10.32381/JPM.2019.36.04.2

Abstract Graphite is the most suitable material as dry lubricant. However, its application as a lubricant is limited with necessity of moisture vapors. Alternatively, polytetrafluoroethylene (PTFE) has an excellent lubrication property but does not have mechanical characteristics. The effect of gamma radiation doses on the lubrication behavior of graphite –PTFE (Inoflon A-408) system has been studied using (TR-TW-30L) tribotester with thrust washer attachment. Different compositions of graphite and PTFE were prepared and irradiated by gamma rays. Improved tribological properties of graphite –PTFE system showed by decrease in coefficient of friction and wear. SEM-EDX, XRD and contact angle analysis confirm fluorination of… More >

KAZIM SHAMIM RIZVI, P. K. DUTTA

Journal of Polymer Materials, Vol.36, No.3, pp. 217-228, 2019, DOI:10.32381/JPM.2019.36.03.2

Abstract In this investigation we have shown the preparation of carboxylic acid containing new chromophore : 4-(3-(4-nitrophenyl) thioureido) benzoic acid and its use.The chemical modification of chitosan, e.g., chitosan- acid salt complexes is done under mild conditions. The synthesis of chromophore was carried out by conventional methods and the novel polymer complex was soluble in most of the organic solvents. The modified chitosan was analyzed by various techniques like optical properties by UV and SHG spectroscopy which showed red shift. The antibacterial activity showed obvious effect against food pathogenic bacteria. More >

MERYEM KORUYUCU^a, FEHMi SALTAN^a,b, GÖKHAN KÖK^a, HAKAN AKAT^a, YEŞIM SALMAN^a,*

Journal of Polymer Materials, Vol.36, No.3, pp. 207-216, 2019, DOI:10.32381/JPM.2019.36.03.1

Abstract The present study has demonstrated that novel acrylic glycopolymers are successfully prepared by using monosaccharides containing an acrylate group (9-12). For this purpose, sugar based acrylate monomers were synthesized via ring opening method (Method B) and homopolymerization of this sugar oxypropylacrylates was performed using free radical polymerization. The characterization of all the monomers and polymers were verified by ¹HNMR, ¹³CNMR, FTIR and GPC techniques. The Glass transition temperatures and thermal characteristics of the polymers were also analyzed by using DSC and TG techniques. The thermal stability of prepared polymers have changed with the stereochemistry of the carbohydrate moiety. Also, the… More >

FEHMI SALTAN^1,2, AYLIN PALAMUTLU², HAKAN AKAT^2,*

Journal of Polymer Materials, Vol.36, No.2, pp. 133-147, 2019, DOI:10.32381/JPM.2019.36.02.3

Abstract In this work, tetraphenylporphyrin (TPP) compound was first synthesized by the condensation reaction of pyrrole and benzaldehyde using Adler method. Then, the synthesized tetraphenylporphyrin was nitrated with sodium nitrite. Nitro-functionalized porphyrin (TPP-NO₂ ) compound was reduced to amine-functional using ammonia and this amine- functionalized porphyrin was reacted with methacryloyl chloride to obtain porphyrin-derived radical monomer (TPP-MAO). Copolymer was synthesized with obtained porphyrin functional monomer and styrene by free radical polymerization method. Structural characterization and spectroscopic studies of the synthesized compounds were carried out by FTIR, H¹ -NMR, UV spectroscopy. The molecular weight and thermal properties of the copolymer were determined… More >

JALPA V. CHOPDA, DHARMESH B. SANKHAVARA, JIGNESH P. PATEL, P. H. PARSANIA^*

Journal of Polymer Materials, Vol.36, No.1, pp. 101-109, 2019, DOI:10.32381/JPM.2019.36.01.8

Abstract The epoxy resin (EMBHBC) of (2E,6E)-bis (4-hydroxybenzylidene)-4-methyl cyclohexanone (MBHBC) was synthesized by condensing 0.5 mol MBHBC and 2.5 mol epichlorohydrin in 500 mL isopropyl alcohol as a solvent and 1.0 mol NaOH in 50 mL water as a catalyst at 80°C for 3 h. The structure of EMBHBC was supported by UV-Vis, FTIR, ¹ HNMR and ¹³CNMR spectroscopic techniques. Molecular weights and molecular weight distribution of EMBHBC were determined by gel permeation chromatography. DSC thermogram of EMBHC showed one endothermic transition (95.9°C) and two exothermic transitions (317.7°C and 382.2°C) due to melting and decomposition transitions, respectively. EMBHBC is thermally stable… More >

CHUNYAN LIU^*, YUNHE LIU, ZIHAN PAN, QIUTING LI, HAN XU, TAO LIU

Journal of Polymer Materials, Vol.36, No.1, pp. 87-99, 2019, DOI:10.32381/JPM.2019.36.01.7

Abstract In this work, a series of novel lignin-based bis-benzoxazine monomers were efficiently synthesized by the reaction of renewable phenols: guaiacol, vanillyl alcohol, eugenol, vanillin with ethylene diamine and paraformaldehyde. The chemical structures of these lignin-based bis-benzoxazine monomers were confirmed by ¹H-NMR, ¹³C-NMR and FTIR, indicating the formation of benzoxazine ring. The obtained bis-benzoxazine monomers were cured via thermal treatment. The curing behavior of these lignin-based bis-benzoxazine monomers were compared and analyzed via differential scanning calorimetry (DSC), showing that Va-e possessed higher ring-opening polymerization activity than G-e, while E-e and V-e had lower curing activity than G-e. More >

KAZIM SHAMIM RIZVI, P.K.DUTTA^*

Journal of Polymer Materials, Vol.36, No.1, pp. 75-85, 2019, DOI:10.32381/JPM.2019.36.01.6

Abstract The present investigation deals with the preparation of carboxylic acid containing new chromophore : 4-2-(2-hydroxy-5-(4-nitrophenyl) diazenyl) benzylidene) hydrazinyl) benzoic acid and its use for chemical modification of chitosan, e.g., chitosan-acid salt complexes under mild conditions. Optical properties of chitosan acid complexes were evaluated by UV and SHG spectroscopy which showed red shift. Antibacterial activity of prepared chitosan acid complexes showed obvious effect against food pathogenic bacteria. The novel polymer complex was soluble in most of the organic solvents. More >

R. SARAVANAN^*, A. SURESHBABU

Journal of Polymer Materials, Vol.37, No.1-2, pp. 43-54, 2020, DOI:10.32381/JPM.2020.37.1-2.4

Abstract In this research work, multi walled carbon nanotubes (MWCNT) particulate filler of various (0.9, 1.2, 1.5, & 1.8 wt %) weight percentage was used along with epoxy resin. A novel method of distributing the MWCNT in epoxy had been employed to reduce the agglomeration problem by charging the MWCNT electrostatically. The electrostatic charged (MWCNT) and uncharged (MWCNT) were loaded on to matrix and then it was stirred by a mechanical mixer for 300 minutes continuously to achieve uniform distribution. The nano filler reinforced composite was fabricated by using hand layup method and mechanical testing (Tensile and Flexural) were performed as… More >