Gálvez Muñoz YA¹, E Martínez Moreno², S Ramírez Vera², L Latournerie Moreno³, JM Lesher Gordillo¹, G Castañón Nájera^1*

Phyton-International Journal of Experimental Botany, Vol.87, pp. 60-67, 2018, DOI:10.32604/phyton.2018.87.060

Abstract The research was conducted with the aim to identify the variability in situ of wild and semi-wild morphotypes of Capsicum spp. that were found growing in different places of Tabasco and the north of Chiapas States. Morphotypes included “Amashito” (five types), “Pico de paloma” (two types), “Garbanzo”, “Ojo de sapo”, “Ojo de cangrejo”, “Colmillo de lagarto” and “Corazón de pollo”. Such characterization is important because there is an extensive variability of forms cultivated in the country, resulting from a wide range of agroecological diversity as well as diverse forms, colours, flavors and sizes that constitute a valuable collection of genes… More >

Nadezda Stevulova^1,*, Viola Hospodarova¹, Adriana Estokova¹, Eva Singovszka¹, Marian Holub¹, Stefan Demcak¹, Jaroslav Briancin², Anton Geffert³, Frantisek Kacik³, Vojtech Vaclavik⁴, Tomas Dvorsky⁴

Journal of Renewable Materials, Vol.7, No.11, pp. 1121-1145, 2019, DOI:10.32604/jrm.2019.07556

Abstract The aim of this study was to characterize two types of cellulosic fibers obtained from bleached wood pulp and unbleached recycled waste paper with different cellulose content (from 47.4 percent up to 82 percent), to compare and to analyze the potential use of the recycled fibers for building application, such as plastering mortar. Changes in the chemical composition, cellulose crystallinity and degree of polymerization of the fibers were found. The recycled fibers of lower quality showed heterogeneity in the fiber sizes (width and length), and they had greater surface roughness in comparison to high purity wood pulp samples. The high… More >

Mehdi Jonoobi^1,*, Masoud Shafie¹, Younes Shirmohammadli¹, Alireza Ashori², Hamid Zarea- Hosseinabadi¹, Tizazu Mekonnen³

Journal of Renewable Materials, Vol.7, No.11, pp. 1055-1075, 2019, DOI:10.32604/jrm.2019.08188

Abstract Date palm (phoenix dactylifera), which is mostly found in the middle east countries such as Iran, Iraq, Saudi Arabia, and the United States (California) that play a significant role in the economical and the environmental condition in those areas. The main purpose of planting dates is its fruit, which is consumed as fresh, dried or processed forms. There are approximately 100 million date palm trees in the worldwide that 62 million of these trees located in the Middle East and North Africa. In Saudi Arabia only, 15000 tons of date palm leaves is prepared as waste materials. The leaves of… More >

C. A. Rodríguez Ramírez², Fleur Rol³, Julien Bras³, Alain Dufresne³, Nancy Lis Garcia^2,*, Norma D´Accorso^1,2,*

Journal of Renewable Materials, Vol.7, No.4, pp. 373-381, 2019, DOI:10.32604/jrm.2019.04236

Abstract New trends in the area of material improvement are the use of natural nano-charges from renewable biomass, improving the value and sustainability of our country’s natural products. Bamboo is widely used in many countries of the world, although in Argentina, despite being commercialized and exported for the manufacture of wood floors, it goes unnoticed despite having native species. Therefore, researchers identified the native and exotic species present in our country and are working on novel uses. In this context, it is proposed the Argentine Tacuara Cane (Guadua Angustifolia Kunth), endemic plant as a new source of nanocellulosic materials, where stem… More >

Ibtissem Moussa^1,2, Ramzi Khiari^1,3,4,*, Ali Moussa², Gérard Mortha⁴, Mohamed Farouk Mhenni¹

Journal of Renewable Materials, Vol.7, No.4, pp. 345-354, 2019, DOI:10.32604/jrm.2019.04011

Abstract The most abundant phenolic biopolymer in the biosphere is the lignin. This phenolic biopolymer commonly exists in combination with polysaccharides and other cell wall components. In this study, the solvent system dioxane-water is used to extract lignin, which is considered as unaltered native lignin. The dioxane lignin extracted from fig stems was characterized regarding to its structural feature, quantification of its functional groups, molecular weight, and evaluation of its thermal properties. Purity and molecular weight distribution of the studied lignin indicated that isolated lignin contained a low amount of sugar (c.a. 19%) and had a high weight-average molecular weight (10… More >

Haifeng WANG^{1, 2, 3} , Hongxuan HE²

BIOCELL, Vol.42, No.2, pp. 47-54, 2018, DOI:10.32604/biocell.2018.07006

Abstract The emergence and spread of antibiotic resistance genes among Bacteria are a serious threat to global health. Their occurrence in animals which are in contact with humans is also important. The Chinese cobra (Naja atra, Elapidae), though a highly venomous species, is appreciated as food and as a source of materials used in traditional Chinese medicine. We are here reporting the isolation of multidrug-resistant Klebsiella pneumoniae (Enterobacteriaceae) from the lung of Naja atra, obtained from a snake farm in a Beijing suburb. Our study analyzed, using gene sequencing, the occurrence of antibiotic resistance genes (ARGs) in three K. pneumoniae… More >

M.N.D. Cherief¹, M. Elmeguenni¹, M. Benguediab¹

CMC-Computers, Materials & Continua, Vol.51, No.3, pp. 187-201, 2016, DOI:10.3970/cmc.2016.051.187

Abstract Impact behavior of polymers has received considerable attention in recent years, and much work based on fracture mechanic approaches has been carried out. In this paper, fracture behavior in large deformation of a high density polyethylene (HDPE) materials was investigated through experimental impact testing on single edge notched specimen (SENB) and by using theoretical and analytical fracture criteria concepts. Moreover, a review of the main fracture criteria is given in order to characterize the toughness of this polymer in the both cases (static and dynamic). The fractured specimens obtained from the Charpy impact test were characterized with respect to their… More >

C. A. Bronkhorst^1,2, A. R. Ross³, B. L. Hansen¹, E. K. Cerreta², J. F. Bingert²

CMC-Computers, Materials & Continua, Vol.17, No.2, pp. 149-174, 2010, DOI:10.3970/cmc.2010.017.149

Abstract A common sample geometry used to study shear localization is the "tophat": an axi-symmetric sample with an upper "hat" portion and a lower "brim" portion. The gage section lies between the hat and brim. The gage section length is on the order of 0.9 mm with deformation imposed through a Split-Hopkinson Pressure Bar system at maximum top-to-bottom velocity in the range of 10-25 m/sec. Detailed metallographic analysis has been performed on sections of the samples to quantify the topology and deformation state of the material after large deformation shear. These experiments performed with polycrystalline tantalum have been modeled using a… More >

Mahmoud MOUSTAFA^1,2 , Saad ALAMRI¹, Tarek TAHA³, Ali SHATI¹, Sulaiman ALRUMMAN¹, Mohamed ALKAHTANI¹

BIOCELL, Vol.43, No.3, pp. 155-166, 2019, DOI:10.32604/biocell.2019.06814

Abstract The aim of the current research was to clone and to characterize the partial 66 kDa streptavidin-binding peptide (SBP) found in the germinated embryos of Pisum sativum L. var. Alaska. The pea (P. sativum var. Alaska) embryos possess prominent 66 kDa SBPs that gradually disappeared after few hours of germination in germinated embryos, but not in the cotyledons. The total RNA was isolated from embryos of P. sativum but could not be isolated from the cotyledons. The partial nucleotides sequences of 66 kDa SBPs of embryonic stalk (P. sativum var. Alaska) were cloned and identified using pMOSBlue vector. 66 kDa… More >

Reham Reda^{1, *}

FDMP-Fluid Dynamics & Materials Processing, Vol.15, No.3, pp. 171-185, 2019, DOI:10.32604/fdmp.2019.03923

Abstract Constrained groove pressing (CGP) is a severe plastic deformation (SPD) technique used as a strengthening method for sheet metal. In the current work, an optimal/cost-saving design for CGP dies was attained using the stress analysis tool in SolidWorks Simulation Xpress wizard. This study examined low-cost and widely industrially applied aluminium materials, i.e., pure 1050 Al and 5052 Al alloy. Each material was subjected to three passes of the CGP process using a 150 tons capacity press. For both materials, inter-pass annealing treatment was undertaken before the third pass. The effect of the number of CGP passes on the microstructure and… More >