Jinlong Shang^*

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.9, pp. 2315-2328, 2023, DOI:10.32604/fdmp.2023.026742 - 16 May 2023

Abstract In this study, the durability of a new polymer carbon fiber-reinforced epoxy resin used to produce composite material in the aerospace field is investigated through analysis of the corrosion phenomena occurring at the microscopic scale, and the related infrared spectra and thermal properties. It is found that light and heat can contribute to the aging process. In particular, the longitudinal tensile strength displays a non-monotonic trend, i.e., it first increases and then decreases over time. By contrast, the longitudinal compressive and inter-laminar shear strengths do not show significant changes. It is also shown that the More >

Nurul Anis Athirah Ab Aziz^*, Chin Wei Lai^*, Boon Hoong Ong

Journal of Renewable Materials, Vol.11, No.6, pp. 2745-2770, 2023, DOI:10.32604/jrm.2023.025899 - 27 April 2023

Abstract Nowadays, corrosion is not only undesirable, but it also has a significant influence on the industrial sectors and technical innovations that have demand for metals. The global economic damage is expected to reach $2.5 trillion, equivalent to more than 3.4% of the world’s GDP in 2013. It is linked with significant financial harm, manufacturing pollution, and safety issues. An electrochemical process primarily induces metal corrosion at the metalelectrolyte interface region, caused by steel oxidation and the reduction of oxygen, protons, and water. Therefore, organic and epoxy coatings can be applied as protective coatings. Additionally, it… More > Graphic Abstract

Leiju Tian¹, Yuhuan Bu^1,*, Huajie Liu^1,*, Lingyun Zhao^2,3

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.5, pp. 1215-1226, 2023, DOI:10.32604/fdmp.2022.022219 - 30 November 2022

Abstract The mechanical properties of Portland cement differ from the weakly consolidated shallow formation in deep water. This results in undesired abrupt changes in the compressive strength and elastic modulus at the cement–formation interface. In this study, a water-borne epoxy resin was applied as a strengthening material to reinforce the weakly consolidated shallow formation and protect the cement sheath from potential failure. The mechanical properties of the unconsolidated clay were tested, including their changes with increases in the temperature and curing time. In addition, the effects of the seawater, cement slurry alkaline filtrate, and saltwater drilling More >

Peng Chen^*, Wentao Shi, Jian Wan, Lu Huang

Journal of Renewable Materials, Vol.11, No.2, pp. 1017-1029, 2023, DOI:10.32604/jrm.2023.023699 - 22 September 2022

Abstract The poly(epoxy-N-methylaniline) conductive organic carrier was used as the bonding phase of the low-temperature conductive silver paste. Then, this was mixed with different proportions of silver powder to prepare the lowtemperature conductive silver paste. Afterwards, the effect of the conductive organic carrier on the properties of the low-temperature conductive silver paste was determined by IR, DMA and SEM. The results revealed that the prepared conductive paste has good conductivity, film-forming performance, printing performance, low-temperature curing performance, and anti-aging performance. When the mass percentage of the bonding phase/conductive phase was 40/60, the lowest volume resistivity of More > Graphic Abstract

GAURAV AGARWAL

Journal of Polymer Materials, Vol.39, No.3-4, pp. 255-267, 2022, DOI:10.32381/JPM.2022.39.3-4.6

Abstract Studies were conducted to observe the effect of fracture toughness and damping response on fabric reinforced epoxy polymer composites. The samples of glass fabric, kevlar fabric and carbon fabric having 15wt%, 25wt%, 35wt%, 45wt% and 55wt % fabric content were prepared and tested following ASTM standards. Fracture toughness, peak load and increase in energy absorption are determined for the fabric-epoxy composites. Effect of temperature on storage modulus, loss modulus and tan delta values for various percentages of fabric epoxy composites are noticed and corresponding damping response behaviour is determined. The results revealed that reduction in More >

RITESH D. BHATT, JIGNESH P. PATEL, PARSOTAM H. PARSANIA^*

Journal of Polymer Materials, Vol.39, No.3-4, pp. 223-239, 2022, DOI:10.32381/JPM.2022.39.3-4.4

Abstract Compression-molded epoxy methacrylate of bisphenol-C-jute/treated jute-banana/groundnut/ cane sugar/pineapple leaf/rice husk/wheat husk sandwich composites were fabricated under 5 MPa pressure at room temperature for 3 h. Alkali treated jute-natural fiber sandwich composites displayed considerably improved mechanical properties over untreated jute-natural fiber sandwich composites due to surface modification of the jute fibers. Both types of sandwich composites showed high water uptake tendency, excellent hydrolytic stability against acids, alkali, and salt solutions, and also a longer equilibrium time at 30o C. Alkali treated sandwich composites revealed a considerably lower water uptake tendency than untreated sandwich composites. Observed water More >

RITESH D. BHATT, JIGNESH P. PATEL, PARSOTAM H. PARSANIA^*

Journal of Polymer Materials, Vol.39, No.3-4, pp. 205-221, 2022, DOI:10.32381/JPM.2022.39.3-4.3

Abstract Epoxy methacrylate of bisphenol-C-jute/treated jute and their sandwich composites of white coir, brown coir, wild almond, bamboo, betel nut, and palmyra were prepared by a compression molding technique under 5MPa pressure and at room temperature for three h. The neat sample showed almost double tensile strength than its jute composite, while it is comparable for treated jute. The composites revealed substantially improved flexural strength compared to neat. The neat, jute/treated jute and their sandwich composites indicated good impact strength, pretty good Barcol hardness, and fairly good electric strength. The neat sample showed excellent volume resistivity, More >

RITESH D. BHATT, JIGNESH P. PATEL, PARSOTAM H. PARSANIA^*

Journal of Polymer Materials, Vol.39, No.1-2, pp. 37-53, 2022, DOI:10.32381/JPM.2022.39.1-2.3

Abstract Compression-molded epoxy methacrylate of bisphenol-C-jute/treated jute-banana/groundnut/ cane sugar/pineapple leaf/rice husk/wheat husk sandwich composites were fabricated under 5 MPa pressure at room temperature for 3 h. Alkali treated jute-natural fiber sandwich composites displayed considerably improved mechanical properties over untreated jute-natural fiber sandwich composites due to surface modification of the jute fibers. Both types of sandwich composites showed high water uptake tendency, excellent hydrolytic stability against acids, alkali, and salt solutions, and also a longer equilibrium time at 30o C. Alkali treated sandwich composites revealed a considerably lower water uptake tendency than untreated sandwich composites. Observed water More >

Yongming Chen^1,2,#, Shuai Huang^1,#, Han Zhao¹, Ru Yang², Yining He¹, Tianyu Zhao¹, Yunlong Zhang¹, Qinghong Kong^1,*, Shasha Sun^3,*, Junhao Zhang³

Journal of Renewable Materials, Vol.10, No.12, pp. 3119-3130, 2022, DOI:10.32604/jrm.2022.019576 - 14 July 2022

Abstract To enhance the thermal stability and flame retardancy of epoxy resin (EP), beta-cyclodextrin (β-CD) is successfully introduced into the layered tin phenylphosphonate (SnPP), which is incorporated into EP matrix for preparing EP/β-CD@SnPP composites. The results indicate that the addition of β-CD@SnPP obviously improve the thermal stability and residual yield of EP composites at higher temperature. When the amount of β-CD@SnPP is only 4 wt%, EP/4β-CD@SnPP composites pass V-1 rating, and LOI value is up to 30.8%. Meanwhile, β- CD@SnPP effectively suppress the heat release and reduce the smoke production of EP/β-CD@SnPP composites in combustion, and More >

Meixian Li¹, Xin Hu¹, Jie Yang¹, Hongyu Yang^1,3,*, Yao Yuan^2,*

Journal of Renewable Materials, Vol.10, No.10, pp. 2639-2654, 2022, DOI:10.32604/jrm.2022.019491 - 08 June 2022

Abstract In this work, a bio-based flame retardant (Cy-HEDP) was synthesized from cytosine and HEDP through a facile salt-forming reaction and embedded into epoxy matrix to improve the flame retardancy and smoke suppression performance. The product Cy-HEDP was well characterized by FTIR, ¹ H and ³¹P NMR and SEM tests. On the basis of the results, by adding 15 wt% Cy-HEDP, the EP₁₅ can pass UL-94 V-0 rating, and the total smoke production (TSP) as well as total heat release (THR) can be decreased by 61.05% (from 22.61 to 8.7 m² /m² ) and 39.44% (from 103.19 to 62.50 More > Graphic Abstract