Pronob Gogoi, Dhaneswar Das, Shyamalima Sharma, Swapan K. Dolui^*

Journal of Renewable Materials, Vol.3, No.2, pp. 151-159, 2015, DOI:10.7569/JRM.2014.634129

Abstract Alkyd resins based on Jatropha curcas oil with different molar ratios of phthalic anhydride (PA) and maleic anhydride (MA) were prepared by alcoholysis followed by polyesterifi cation reaction. The progress of the reaction was traced by the determination of acid value at regular time intervals. From the kinetic study the extent of the reaction was found in the range of 52.4–61.2%. The prepared resins were blended with a commercially available fast-curing epoxy resin in order to improve the properties like curing time, chemical resistance, tensile strength, and thermal stability. The morphology study of the blends showed good compatibility of alkyd… More >

Yongming Chen^1,2,#, Shuai Huang^1,#, Han Zhao¹, Ru Yang², Yining He¹, Tianyu Zhao¹, Yunlong Zhang¹, Qinghong Kong^1,*, Shasha Sun^3,*, Junhao Zhang³

Journal of Renewable Materials, Vol.10, No.12, pp. 3119-3130, 2022, DOI:10.32604/jrm.2022.019576

Abstract To enhance the thermal stability and flame retardancy of epoxy resin (EP), beta-cyclodextrin (β-CD) is successfully introduced into the layered tin phenylphosphonate (SnPP), which is incorporated into EP matrix for preparing EP/β-CD@SnPP composites. The results indicate that the addition of β-CD@SnPP obviously improve the thermal stability and residual yield of EP composites at higher temperature. When the amount of β-CD@SnPP is only 4 wt%, EP/4β-CD@SnPP composites pass V-1 rating, and LOI value is up to 30.8%. Meanwhile, β- CD@SnPP effectively suppress the heat release and reduce the smoke production of EP/β-CD@SnPP composites in combustion, and the peak heat release rate… More >

Kazuo Umezawa^*, Andrzej Breborowicz^†, Shamil Gantsev^‡

Oncology Research, Vol.28, No.5, pp. 541-550, 2020, DOI:10.3727/096504020X15929100013698

Abstract There have been great advances in the therapy of cancer and leukemia. However, there are still many neoplastic diseases that are difficult to treat. For example, it is often difficult to find effective therapies for aggressive cancer and leukemia. An NF- B inhibitor named dehydroxymethylepoxyquinomicin (DHMEQ) was discovered in 2000. This compound was designed based on the structure of epoxyquinomicin isolated from a microorganism. It was shown to be a specific inhibitor that directly binds to and inactivates NF- B components. Until now, DHMEQ has been used by many scientists in the world to suppress animal models of cancer and… More >

Meixian Li¹, Xin Hu¹, Jie Yang¹, Hongyu Yang^1,3,*, Yao Yuan^2,*

Journal of Renewable Materials, Vol.10, No.10, pp. 2639-2654, 2022, DOI:10.32604/jrm.2022.019491

Abstract In this work, a bio-based flame retardant (Cy-HEDP) was synthesized from cytosine and HEDP through a facile salt-forming reaction and embedded into epoxy matrix to improve the flame retardancy and smoke suppression performance. The product Cy-HEDP was well characterized by FTIR, ¹ H and ³¹P NMR and SEM tests. On the basis of the results, by adding 15 wt% Cy-HEDP, the EP₁₅ can pass UL-94 V-0 rating, and the total smoke production (TSP) as well as total heat release (THR) can be decreased by 61.05% (from 22.61 to 8.7 m² /m² ) and 39.44% (from 103.19 to 62.50 MJ/m² )… More > Graphic Abstract

Xianling Fu^#, Hongliang Ding^#, Xin Wang^*, Lei Song, Yuan Hu^*

Journal of Renewable Materials, Vol.10, No.9, pp. 2303-2317, 2022, DOI:10.32604/jrm.2022.020759

Abstract Although epoxy resin has been widely used in various fields, it still suffers from some problems including brittleness and flammability. In this study, a new phosphonic acid, N, N-bis(phosphomethyl) glycine (GDMP), was prepared by Mannich reaction with bio-based glycine and then a novel layered zirconium phosphonate (ZrGDMP) was synthesized using GDMP and zirconyl chloride hydrate as reactants. The chemical structure of ZrGDMP was well characterized by ¹H and ³¹P NMR, SEM, XRD and XPS. The effect of ZrGDMP on the flame retardancy, smoke suppression, strengthening and toughening performances of the epoxy matrix was investigated and evaluated. TGA results indicated that… More > Graphic Abstract

Ilushin Pavel, Vyatkin Kirill, Anton Kozlov^*

FDMP-Fluid Dynamics & Materials Processing, Vol.18, No.5, pp. 1229-1241, 2022, DOI:10.32604/fdmp.2022.020424

Abstract When producing hydrocarbons, an important task relates to the optimization of the stock of the producing well. The main complications for wells in non-working mode are represented by the formation of asphalt-resin-paraffin deposits. This issue is one of the most common problems in the production and transportation of oil. A promising method to deal with these deposits is the application of smooth coatings made of epoxy polymers on the inner surface of the production well tubing. In this work, a number of laboratory studies were carried out on the “Cold Finger” installation to assess the effectiveness of this approach. These… More > Graphic Abstract

Songhua Hu^*, Lixiong Sun, Hongying Xiong^*

FDMP-Fluid Dynamics & Materials Processing, Vol.18, No.4, pp. 1083-1088, 2022, DOI:10.32604/fdmp.2022.019038

Abstract An analysis of a booster arm made of a carbon fiber reinforced epoxy composite material is conducted by means of a finite element analysis method. The mechanical properties are also determined through stretching and compression performance tests. It is found that the surface treatment of the fibers causes the silane coupling agent to undergo a chemical reaction on the surface of the glass fiber. The used material succeeds in producing significant vibrations damping (vibration attenuation effect is superior to that obtained with conventional alloy materials). More >

Lara Greiner^1,*, Philipp Kukla², Sebastian Eibl¹, Manfred Döring³

Journal of Renewable Materials, Vol.10, No.7, pp. 1931-1950, 2022, DOI:10.32604/jrm.2022.019548

Abstract A novel, versatile flame retardant substructure based on phosphorylated salicylic acid (SCP) is described and used in the synthesis of new flame retardants for HexFlow^® RTM6, a high-performance epoxy resin used in resin transfer molding processes as composite matrix. The starting material salicylic acid can be obtained from natural sources. SCP as reactive phosphorus chloride is converted with a novolak, a novolak containing 9, 10-dihydro-9- oxa-10-phospha-phenanthrene-10-oxide (DOPO) substituents or DOPO-hydroquinone to flame retardants with sufficient thermal stability and high char yield. Additionally, these flame retardants are soluble in the resin as well as react into the epoxy network. The determined… More >

Daqin Zhang^1,2, Chufeng Yang³, Huayang Ran^1,2, Juanli Wang^1,2,*, Jintao Wan^1,2,*, Yuhu Li^1,2, Pujun Jin^1,2, Daodao Hu^1,2

Journal of Renewable Materials, Vol.10, No.7, pp. 1797-1811, 2022, DOI:10.32604/jrm.2022.018754

Abstract The development of efficient green flame retardants is an important way to realize more sustainable epoxy thermosets and downstream materials. In this work, a monoepoxide is synthesized through O-glycidylation of eugenol, and then reacted with DOPO (9,10-dihydro-9-oxa-10-phosphophenanthrene-10-oxide) to obtain a new bio-based flame retardant, DOPO-GE. DOPO-GE is blended with a bisphenol A epoxy prepolymer exhibiting good compatibility and DDS (4,4′-diaminodiphenylsulfone) is used as the curing agent to afford epoxy thermosets. Although DOPO-GE leads to the reduced glass transition temperature of the thermosets, the storage modulus increases considerably. The DOPO-GE-modified thermosets exhibit the high thermal stability with the onset thermal decomposition… More >

Hongxiang Liu^1,2,,*, Neng Xiong^1,2, Songli Wang^1,2, Wei Zhang^1,2, Bo Yong^1,2

FDMP-Fluid Dynamics & Materials Processing, Vol.18, No.3, pp. 549-561, 2022, DOI:10.32604/fdmp.2022.017979

Abstract

The effects of a magnesium-based layered composite on the flammability of a phenolic epoxy resin (EP) are studied. In order to produce the required composite material, first, magnesium hydroxide, aluminum salt and deionized water are mixed into a reactor according to a certain proportion to induce a hydrothermal reaction; then, the feed liquid is filtered out using a solid-liquid separation procedure; finally, the material is dried and crushed. In order to evaluate its effects on the flammability of the EP, first, m-phenylenediamine is added to EP and vacuum defoamation is performed; then, EP is poured into a polytetrafluoroethylene mold, cooled… More >