Jingcheng Chen¹, Zhili Zhou^1,2,*, Zhaoqing Pan¹, Ching-nung Yang³

Journal of New Media, Vol.1, No.2, pp. 87-99, 2019, DOI:10.32604/jnm.2019.06582

Abstract Recently, image representations derived by convolutional neural networks (CNN) have achieved promising performance for instance retrieval, and they outperform the traditional hand-crafted image features. However, most of existing CNN-based features are proposed to describe the entire images, and thus they are less robust to background clutter. This paper proposes a region of interest (RoI)-based deep convolutional representation for instance retrieval. It first detects the region of interests (RoIs) from an image, and then extracts a set of RoI-based CNN features from the fully-connected layer of CNN. The proposed RoI-based CNN feature describes the patterns of the detected RoIs, so that… More >

Zhizheng Zhang¹, Jing Feng^1,*, Jun Yan², Xiaolei Wang¹, Xiaocun Shu¹

Journal of New Media, Vol.1, No.1, pp. 1-9, 2019, DOI:10.32604/jnm.2019.05937

Abstract Clouds play an important role in modulating radiation processes and climate changes in the Earth's atmosphere. Currently, measurement of meteorological elements such as temperature, air pressure, humidity, and wind has been automated. However, the cloud's automatic identification technology is still not perfect. Thus, this paper presents an approach that extracts dense scale-invariant feature transform (Dense_SIFT) as the local features of four typical cloud images. The extracted cloud features are then clustered by K-means algorithm, and the bag-of-words (BoW) model is used to describe each ground-based cloud image. Finally, support vector machine (SVM) is used for classification and recognition. Based on… More >

A. Joshuva¹, V. Sugumaran²

Structural Durability & Health Monitoring, Vol.13, No.2, pp. 181-203, 2019, DOI:10.32604/sdhm.2019.00287

Abstract Wind turbine blades are generally manufactured using fiber type material because of their cost effectiveness and light weight property however, blade get damaged due to wind gusts, bad weather conditions, unpredictable aerodynamic forces, lightning strikes and gravitational loads which causes crack on the surface of wind turbine blade. It is very much essential to identify the damage on blade before it crashes catastrophically which might possibly destroy the complete wind turbine. In this paper, a fifteen tree classification based machine learning algorithms were modelled for identifying and detecting the crack on wind turbine blades. The models are built based on… More >

Kong Fah Tee ^1,*

Structural Durability & Health Monitoring, Vol.12, No.3, pp. 129-147, 2018, DOI: 10.3970/sdhm.2018.04316

Abstract Structural health monitoring (SHM) is a vast, interdisciplinary research field whose literature spans several decades with focusing on condition assessment of different types of structures including aerospace, mechanical and civil structures. The need for quantitative global damage detection methods that can be applied to complex structures has led to vibration-based inspection. Statistical time series methods for SHM form an important and rapidly evolving category within the broader vibration-based methods. In the literature on the structural damage detection, many time series-based methods have been proposed. When a considered time series model approximates the vibration response of a structure and model coefficients… More >

C. K. Madhusudana¹, N. Gangadhar¹, Hemantha Kumar, Kumar,^*,1, S. Narendranath¹

Structural Durability & Health Monitoring, Vol.12, No.2, pp. 111-127, 2018, DOI: 10.3970/sdhm.2018.01262

Abstract This paper presents the fault diagnosis of face milling tool based on machine learning approach. While machining, spindle vibration signals in feed direction under healthy and faulty conditions of the milling tool are acquired. A set of discrete wavelet features is extracted from the vibration signals using discrete wavelet transform (DWT) technique. The decision tree technique is used to select significant features out of all extracted wavelet features. C-support vector classification (C-SVC) and ν-support vector classification (ν-SVC) models with different kernel functions of support vector machine (SVM) are used to study and classify the tool condition based on selected features.… More >

A. Joshuva¹, V. Sugumaran²

Structural Durability & Health Monitoring, Vol.11, No.1, pp. 69-90, 2017, DOI:10.3970/sdhm.2017.012.069

Abstract Renewable energy sources are considered much in energy fields because of the contemporary energy calamities. Among the important alternatives being considered, wind energy is a durable competitor because of its dependability due to the development of the innovations, comparative cost effectiveness and great framework. To yield wind energy more proficiently, the structure of wind turbines has turned out to be substantially bigger, creating conservation and renovation works troublesome. Due to various ecological conditions, wind turbine blades are subjected to vibration and it leads to failure. If the failure is not diagnosed early, it will lead to catastrophic damage to the… More >

Alamelu Manghai T.M.¹, Jegadeeshwaran R², Sugumaran V.³

Structural Durability & Health Monitoring, Vol.11, No.1, pp. 43-67, 2017, DOI:10.3970/sdhm.2017.012.043

Abstract Diagnosis is the recognition of the nature and cause of a certain phenomenon. It is generally used to determine cause and effect of a problem. Machine fault diagnosis is a field of finding faults arising in machines. To identify the most probable faults leading to failure, many methods are used for data collection, including vibration monitoring, thermal imaging, oil particle analysis, etc. Then these data are processed using methods like spectral analysis, wavelet analysis, wavelet transform, short-term Fourier transform, high-resolution spectral analysis, waveform analysis, etc., The results of this analysis are used in a root cause failure analysis in order… More >

Xiaozhong Chen^1,*, Zhijian Mao¹

Molecular & Cellular Biomechanics, Vol.15, No.4, pp. 229-241, 2018, DOI:10.32604/mcb.2018.03818

Abstract Shape optimization of orthopedic fixation plate is of great importance in the treatment of complex fracture. Therefore, a method in this paper to automatically optimize the complex shape of anatomical plate according to static analysis. Based on the theory of finite element analysis (FEA), our approach is processed as follows. First, the three-dimensional finite element model of the fracture fixation is constructed. Next, according to the type and feature of fracture, the anatomical plate was parameterized in two levels (the bounding surface and plate model). Then, parameter constraints are set up to meet the needs of surgical fracture treatment. Finally,… More >

Yuxiang Huang¹, Chuliu He¹, Jiaqiu Wang², Yuehong Miao¹, Tongjin Zhu¹, Ping Zhou¹, Zhiyong Li^1,2,*

Molecular & Cellular Biomechanics, Vol.15, No.2, pp. 117-125, 2018, DOI: 10.3970/mcb.2018.02478

Abstract Intravascular optical coherence tomography (IVOCT) is becoming more and more popular in clinical diagnosis of coronary atherosclerotic. However, reading IVOCT images is of large amount of work. This article describes a method based on image feature extraction and support vector machine (SVM) to achieve semi-automatic segmentation of IVOCT images. The image features utilized in this work including light attenuation coefficients and image textures based on gray level co-occurrence matrix. Different sets of hyper-parameters and image features were tested. This method achieved an accuracy of 83% on the test images. Single class accuracy of 89% for fibrous, 79.3% for calcification and… More >

Chunliu He¹, Jiaqiu Wang², Yuxiang Huang¹, Tongjing Zhu¹, Yuehong Miao¹, Zhiyong Li^1,2*

Molecular & Cellular Biomechanics, Vol.13, No.1, pp. 23-36, 2016, DOI:10.3970/mcb.2016.013.027

Abstract Fibrous cap thickness (FCT) is seen as critical to plaque vulnerability. Therefore, the development of automatic algorithms for the quantification of FCT is for estimating cardiovascular risk of patients. Intravascular optical coherence tomography (IVOCT) is currently the only in vivo imaging modality with which FCT, the critical component of plaque vulnerability, can be assessed accurately. This study was aimed to discussion the correlation between the texture features of OCT images and the FCT in lipid-rich atheroma. Methods: Firstly, a full automatic segmentation algorithm based on unsupervised fuzzy c means (FCM) clustering with geometric constrains was developed to segment the ROIs… More >