Marion Thébault¹, Larysa Kutuzova², Sandra Jury¹, Iris Eicher¹, Edith-Martha Zikulnig-Rusch¹, Andreas Kandelbauer^2,*

Journal of Renewable Materials, Vol.8, No.6, pp. 603-630, 2020, DOI:10.32604/jrm.2020.09616

Abstract Here, the effects of substituting portions of fossil-based phenol in phenol formaldehyde resin by renewable lignin from two different sources are investigated using a factorial screening experimental design. Among the resins consumed by the wood-based industry, phenolics are one of the most important types used for impregnation, coating or gluing purposes. They are prepared by condensing phenol with formaldehyde (PF). One major use of PF is as matrix polymer for decorative laminates in exterior cladding and wet-room applications. Important requirements for such PFs are favorable flow properties (low viscosity), rapid curing behavior (high reactivity) and sufficient self-adhesion capacity (high residual… More >

Xiangli Wang¹, Peiyong Ni^2,*

FDMP-Fluid Dynamics & Materials Processing, Vol.16, No.2, pp. 237-243, 2020, DOI:10.32604/fdmp.2020.09469

Abstract PM_2.5 and formaldehyde are two main indoor pollutants potentially threatening the health of human beings. In this paper, the concentrations of PM_2.5 and formaldehyde inside an office were measured under different conditions. The effects of temperature on the formaldehyde originating from the decoration materials, including flooring, gypsum powder, joint mixture and corestock, were also assessed. The results show that window ventilation can produce the same PM_2.5 purification as an air cleaner. The concentration of formaldehyde released from the decoration materials is highly correlated to the indoor temperature, but it is not significantly influenced by humidity. In particular, the percentage of… More >

Laura Siverio Martínez¹, Mayra González Hurtado^1,*, Laura M. Castro González², Jacques Rieumont Briones³, Ariel Martínez García¹, María I. Hernández Díaz⁴

Phyton-International Journal of Experimental Botany, Vol.88, No.4, pp. 459-470, 2019, DOI:10.32604/phyton.2019.07719

Abstract Fertilizers industry faces the challenge of improving the efficiency of its products either by optimizing the fertilizers in use or by developing new types of them. During the last decade, controlled and slow release technologies have become more important. These technologies aim to increase the efficiency of the applied substance by increasing its action over time and avoiding losses of all kinds (leaching, volatilization). The main purpose of the current study was to obtain a slow release biofertilizer by incorporating microalgae into a polymeric ureaformaldehyde matrix (PUFM). The quantitative analysis of macronutrients and micronutrients in the microalgae was determined using… More >

Kunal Wazarkar, Anagha Sabnis*

Journal of Renewable Materials, Vol.6, No.4, pp. 438-449, 2018, DOI:10.7569/JRM.2017.634159

Abstract The research work presented in this article deals with the synthesis of cardanol-based polyol and its curing with hexabutoxymethyl melamine (HBMM) for application in coatings. Cardanol-based polyol was prepared via thiol-ene click reaction using thioglycerol. Unsaturation present in the long chain of cardanol was successfully utilized to synthesize polyol via thiol-ene coupling. The reaction was carried out between cardanol and thioglycerol in the presence of Irgacure 184 (photoinitiator) and 1,8-Diazabicyclo[5.4.0]undec-7-ene (catalyst) under UV light for 12 h at 80 °C. After completion of the reaction, one mole of thioglycerol was successfully added across the double bond of a fatty chain… More >

Flávio Pereira¹, João Pereira², Nádia Paiva³, João Ferra³, Jorge Manuel Martins^1,4, Fernão D. Magalhães¹, and Luísa Carvalho^1,4*

Journal of Renewable Materials, Vol.4, No.1, pp. 41-46, 2016, DOI:10.7569/JRM.2015.634128

Abstract This work studies the use of soy protein as a natural formaldehyde scavenger in wood particleboard production. The protein is incorporated in two forms: a) as a powder, during the blending process of wood particles with urea-formaldehyde binder resin, and b) as an aqueous solution, added at different times during resin synthesis. Analysis of variance (ANOVA) was used to evaluate the signifi cance level of two effects (amount of added soy and time of addition) on internal bond strength, thickness swelling, and formaldehyde content of the resulting panels. The results showed that soy protein can contribute to decrease the formaldehyde… More >